执行器故障下的运载火箭非奇异终端滑模容错控制

针对存在未知外部干扰和执行器卡死故障的运载火箭,提出了一种基于非奇异终端滑模面的姿态跟踪控制算法。首先,建立了考虑干扰和执行器卡死故障的运载火箭姿态控制系统多输入多输出系统模型;然后定义了运载火箭姿态跟踪系统模型,针对定义的模型,设计了一种非奇异终端滑模面,使得系统在执行器故障情况下仍能较为精确地跟踪参考信号。基于李雅普诺夫函数证明了运载火箭姿态跟踪控制系统的稳定性和有限时间收敛特性。数值仿真检验了本文基于非奇异终端滑模运载火箭姿态跟踪控制算法的有效性。     

火箭发动机涡轮泵故障检测及预测算法研究

涡轮泵作为液体火箭发动机的核心部件,恶劣的工作环境和极高的转速使其易发生组件断裂、烧蚀等问题。为了对液体火箭发动机的涡轮泵进行健康管理,提出针对某型液体火箭发动机涡轮泵的数据驱动故障检测、故障预测及健康状态评估方法。在某型液体火箭发动机试车数据集上,通过对涡轮泵轴、径、切向振动数据进行对应的时域、频域特征处理后,送入训练好的ResNet网络、自主设计的图像特征识别算法以及退化模式线性回归模型,分别实现了对该型液体火箭发动机涡轮泵的故障检测、预测及健康状态评估,具有较高的准确性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.     

涡轮泵试车数据单类支持向量机检测算法

为了在缺乏故障样本的情况下检测某型液体火箭发动机涡轮泵故障,实现基于不完整信息的状态决策,建立了基于v-支持向量分类器的单类支持向量机新异类检测模型。在分析了模型决策边界、支持向量和约束条件之间关系的基础上,为单类支持向量机引入并改进了序贯最小优化算法,提高了训练效率,解决了大样本训练问题。通过对某型液体火箭发动机涡轮泵历史试车数据的分析,结果表明,所建模型的训练速度得到了很大提高,对涡轮泵状态的检测效果良好。     

RS码的时域编码频域译码技术

通过对于RS码的时域编码／频域译码的算法进行分析,找到了它们的不同之处及转换方法,得出了时域编码／频域译码的混合编译码方法,提高了运算速度和纠错能力。     

基于强跟踪EKF的组合导航系统故障检测方法

针对大方位失准角的机载SINS/GPS组合导航系统,为保证在高动态环境下实现高精度、高可靠的导航,利用强跟踪EKF滤波残差设计了一种基于残差统计特性的坏值检测算法,对导航信息进行估计和跟踪.仿真结果表明,该算法能够实时检测出GPS量测信息中的坏值信息,隔离后可显著提高组合导航精度,具有较高的可靠性、出色的容错能力和重要的工程应用价值.     

基于RBF带学习能力高精度非线性FDD设计

在轨航天器故障检测与诊断问题需要面对模型的非线性,而且要求尽量提高其检测的精度,为此设计了基于径向基函数（RBF）神经网络的动量轮非线性故障检测与诊断（FDD）方案。首先应用RBF补偿建模误差,提高检测精度,并选择李雅普诺夫函数证明其收敛性;然后应用非线性观测器来产生故障残差,给出了阈值以及故障检测的时间;应用RBF网络对故障信号进行重构,并据此设计了带学习能力的FDD策略。再次建立了详细的动量轮模型,通过不同条件下的仿真研究分别验证残差的阈值特性、时间特性以及RBF的重构能力,仿真结果表明了算法的有效性。     

“天巡一号”微小卫星星务故障管理设计

对“天巡一号”微小卫星的总体情况进行了简单介绍,并针对星务管理系统的功能给出了设计方案.从硬件和软件上提出了基于局部冷冗余备份的多项故障预防及故障处理设计,并设计了电源安全管理及软件容错等多项可靠性措施,提高了星务管理系统的可靠性及安全性,符合“天巡一号”微小卫星星务系统采用单一中央数据处理系统,集成星务管理及姿态控制能力的设计方案.     

故障诊断与维修指导系统

故障诊断与维修指导系统是用于演示验证新型号垂直发射车用CAN总线通讯系统可靠性的设备,通过CAN总线节点、单板节点、通讯电缆组、供电模块以及系统软件,对垂直发射车的通讯故障进行模拟、检测和分析,对垂直发射车通讯系统的健壮性和安全性进行评估并提供维修指导原则。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.