Pro／E二次开发技术在卫星结构设计中的应用

为解决卫星协同设计过程中总体、结构信息同步滞后问题,基于Pro／E软件进行二次开发,实现对总体与结构接口文件的自动解析;利用解析出来的接口数据,在模型上进行表阵列的自动创建,使总体设计模型的变更能够在结构设计模型中及时得到反映,从而实现“总体一结构”设计结果的快速同步。文章中开发的软件工具,在多颗卫星的研制过程中得到了应用。     

航天器表面电荷激发空间静电场规律研究

从带电表面微元出发,通过求解泊松方程,得到带电介质平板表面邻近空间静电势的解析表达式,建立介质表面电位-介电常数模型,求得了带电介质平板表面电位、表面带电量和介质介电常数三者之间的关系式。结合典型的航天器表面介质材料带电案例,对此类圆盘结构介质平板带电问题进行了仿真分析,结果表明,在介质材料表面电位一定的情况下,表面电荷激发的空间静电势值随距离的增大而减小,并且距离介质表面越近,电势的空间变化率越大;在介质材料带电量相等的情况下,介质表面电位随着介质介电常数的增大而减小,并逐渐趋于一个稳定值,所以在一定范围内选择介电常数较大的介质材料可以降低介质的表面电位,减小介质间发生静电放电的几率。     

液体火箭发动机涡轮泵用机械密封温度场及热载变形研究

基于ANSYS数值计算软件,建立了液体火箭发动机涡轮泵用机械密封的二维稳态传热模型,依靠经验公式确定了模型的对流换热系数。计算了密封环的温度场和热载变形,分析了密封端面比压、回流流量以及不同材质对密封温度场的影响规律。结果表明:密封端面最高温度发生在靠近密封环内径处,且密封端面比压越大密封环温度梯度越大;密封环热载变形呈收敛间隙,最大变形发生在动环端面的外径处,其值约为2.2μm;密封环端面最高温度随回流流量增加而减小,当回流流量从0.1~0.6 kg/s变化时,密封环端面最高温度可降低18%(从100℃降至82℃);当回流流量增大到0.3 kg/s时,继续提高对密封环端面温升的控制不再显著;采用高导热系数的摩擦副材料能够显著降低端面温升和温度梯度,提高密封工作可靠性。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

The geomagnetic solar flare effect identified by SIIG as an indicator of a solar flare observed by GOES satellites

This paper studies the efficiency of geomagnetic solar flare effects (gsfe) in X solar flare detection; so during the period 1999–2007 a comparison between solar flare (sf) observed by satellites of the Geostationary Operational Environmental Satellite (GOES) programme and gsfe published by the Service International des Indices Geomagnetiques (SIIG) is made.     

新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。     

气体自发光在高超声速流场显示中的应用

提出了利用高焓气体自发光作为高超声速流场显示的方法,介绍了在使用高焓运行的激波风洞中,对二维模型的高超声速绕流流场使用此种方法的初步结果,可观察到二维棱形柱的尾流和马赫波的相交。结果表明此种方法不需外加光源,对于结构限制无法设置透明部件的模型,无疑是简单可行的。     

基于马鞍形磁场的永磁直线电机位置解算方法

针对直线电机转子位置检测低成本和较高精度的要求,提出了一种基于马鞍形磁场来获得位置信息的方法及实现过程。分析了永磁体表面的磁场分布特征,指出了利用马鞍形磁场分布曲线来解算位置信息的优点,提出了根据马鞍形磁场推算位置信息的算法流程:先测得错开相位的2条马鞍形曲线数据,划分为4个象限后建立数据库;位置检测时,运用区间搜索算法寻得实际角度所在区间;再根据精度要求,采用合适的插值算法计算得到待解算的角度。仿真结果表明:基于马鞍形磁场的位置解算,能较好地得到直线电机转子的位置信息。     

基于里德堡原子相干效应的微波电场测量技术研究进展

近年来,采用里德堡原子的微波电场测量技术得到了迅速发展,获得了广泛应用。该电场探测技术是一项全新技术,可以将微波电场通过基本物理常数与频率测量直接关联,具有测量动态范围大、测量灵敏度高和测量不确定度小的特点,有望替代传统溯源路径,直接关联国际单位制（SI）。本文基于里德堡原子相干效应的微波电场测量技术原理,针对国内外微波电场的高准确度、高灵敏度和极化方向测量技术发展现状,和对微波电场测量的工程化光源系统,蒸气室探头的仿真验证实验和集成式蒸气室探头的设计研究等方面的相关进展做了详细介绍。     

带集中热源的散热器温度场的数值分析

随着大规模集成电路的发展,电子设备的封装体积越来越小,功率却越来越大,这就使电子设备的温度日益增高,而电子设备的可靠性又与温度密切相关,良好的散热是电子设备应用中重要的一环.本文以通用的矩形翅片式散热器来对比带集中热源和带平均热源的散热器的温度差异,提出以嵌入热管的方法来解决带集中热源散热器的散热难题,并运用IcEPEK软件对其可行性进行了验证.