Estimation of probability of occurrence of F1 layer or L condition using tables and electron density profile models

An algorithm is proposed for evaluation of the probability of occurrence of an F1 layer or L condition, based on tables. Observations independent of the tables database are used for comparison between the estimated probability of occurrence, the formulation used at present in IRI, and the occurrence actually observed. The importance of the inclusion of L condition in the electron density profile model is shown.     

Comparing topside and bottomside-measured characteristics of the F2 layer peak

The ionospheric characteristics of the F2 layer peak have been measured with ionosondes from the ground or with satellites from space. The most common characteristics are the F2-peak density NmF2 and peak height hmF2. In addition to these two parameters this paper studies the F2-peak scale height. Comparing the median values of hmF2 and NmF2 obtained from topside and bottomside sounding shows good agreement in general. The Chapman scale height values for the F2 layer peak derived from topside profiles, H_m,top, are generally several times larger than H_m,bot derived from bottomside profiles.     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

基于C8051F020的绞车键盘模拟训练系统的设计与实现

为方便声纳员进行操作训练,设计、开发了一种能够脱离实装设备的吊放声纳绞车键盘模拟训练系统,绞车键盘操作的画面布局及键盘布局等与实装绞车键盘一致。同时,绞车键盘通过控制变频器带动电机以驱动绞车,可以逼真地模拟实际对绞车的操作,模拟也可以对特定条件下的训练方案进行设定,以提高声纳操作人员的训练水平。     

Ni18%和0Cr15Ni5Cu2Ti异种钢材电子束焊接工艺试验研究

对Ni18%和0Cr15Ni5Cu2Ti超高强度马氏体沉淀硬化不锈钢异种钢材之间进行了电子束焊接工艺试验,就其工艺可焊性及接头性能、金相组织、焊缝质量、力学性能等开展研究,采用X-探伤、静载强度、金相观察、电镜扫描和能谱分析等检测手段对试件进行了分析并得出了相应结论。     

浅析Blob在S3C44B0上的移植

嵌入式Linux系统通常由三部份组成:Bootloader、Kernel和File System,其中Bootloader的任务是为调用Kernel准备必要的软硬件环境。Blob是一款功能强大的Bootloader,本文介绍了Blob的运行过程和整体结构,同时给出将Blob移植到基于S3C44B0目标板的过程,并对移植过程中的关键代码进行了分析,为项目的后续开发打下基础。     

应用模拟退火算法求解飞机调度问题

通过分析飞机运行的时区集合特点,将飞机调度问题转化为固定工件排序问题。根据工件占用机器的时间区间,利用划分时间片算法把需要平行作业的工件挑选出来组成无向图的相邻顶点,从而将固定工件问题转化为图的k-顶点着色问题,然后建立0-1整数规划数学模型,并设计出相应的模拟退火算法。最后应用该算法针对飞机调度问题进行了仿真研究,结果表明:在可接受的时间内能够得到该问题的满意解。     

具有数字化可寻址调光接口的电子镇流器的设计

数字化可寻址调光接口(DALI)是一种专用于照明控制系统的通信接口规范。利用调光镇流控制ICIR2159构成的镇流器控制电路,自动完成从灯预热、灯触发到灯功率控制的全过程。数字控制部分采用PIC16F628,它担任镇流控制器与DALI之间的接口。文中给出了调光曲线、编程思想、程序框图和节能措施。     

F110的最新衍生型F110—GE—129EFE的发展与设计特点

介绍了F110发动机的最新改进型F110－GE－129EEE的发展情况与设计特点。比较了该发动机在提高性能的衍生改进型F110－GE－129（IPE）基础上的技术改进。重点介绍了EFE型发动机的风扇加力燃烧室、喷管系统设计改进的特点。     

具有线性回归特征的多组实验结果对比分析方法的研究

研究试验参数变化情况下．具有线性回归特征的多组试验结果差异性的对比分析方法。数学上谈问题转化为对回归直线的常数口和比例系数6两组随机样本的F检验。当这两个指标均无显著差异时，认为两组(或多组)试验数据无显著差异。谈法将判断的范围外推到了整个实数域，因此要求条件过高。本文提出了重合度法，即用试验参数的共同区域内回归直线置信带的面积重合度．判断实验结果的一致性。对试验数据的分析表明，该方法具有明显的合理性．但其临界值还需进一步研究确定。