Detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target

The rotational motion of a tumbling target brings great challenges to space robot on successfully capturing the tumbling target. Therefore, it is necessary to reduce the target’s rotation to a rate at which capture can be accomplished by the space robot. In this paper, a detumbling strategy based on friction control of dual-arm space robot for capturing tumbling target is proposed. This strategy can reduce the target’s rotational velocity while maintaining base attitude stability through the establishment of the rotation attenuation controller and base attitude adjustment controller. The rotation attenuation controller adopts the multi-space hybrid impedance control method to control the friction precisely. The base attitude adjustment controller applies the dual-arm extended Jacobian matrix to stabilize the base attitude. The main contributions of this paper are as follows: (1) The compliant control method is adopted to achieve a precise friction control, which can reduce the target angular velocity steadily; (2) The dual-arm extended Jacobian matrix is applied to stabilize the base attitude without affecting the target capture task; (3) The detumbling strategy of dual-arm space robot is designed considering base attitude stabilization, realizing coordinated planning of the base attitude and the arms. The strategy is verified by a dual-arm space robot with two 7-DOF (degrees of freedom) arms. Simulation results show that, target with a rotation velocity of 20 (°)/s can be effectively controlled to stop within 30 s, and the final deflection of the base attitude is less than 0.15° without affecting the target capture task, verifying the correctness and effectiveness of the strategy. Except to the tumbling target capture task, the control strategy can also be applied to other typical on-orbit operation tasks such as space debris removal and spacecraft maintenance.     

采用单目视觉的非合作目标星状态估计

针对微小卫星逼近观测未知的空间翻滚非合作目标星任务，提出一种基于单目视觉的目标星相对状态估计方法。在建立追踪星/目标星相对运动模型的基础上，以单目相机识别并测量获得的目标星固有特征的像素位置为观测输入，通过扩展卡尔曼滤波算法实现对目标星相对位置、相对速度、相对姿态、角速度、惯量比和特征位置等状态的估计。仿真结果表明,该方法能够很好地实现对未知非合作目标星的相对状态估计，姿态估计误差小于2°，位置估计误差小于0.1 m，特征点位置平均估计误差小于0.04 m。     

靶机挂载可变 RCS龙勃透镜时的 RCS起伏特性

训练用靶机尺寸远小于实战中的飞机,其 RCS数值大小和起伏特性与飞机存在较大的差别。为了以低廉的价格为部队训练提供高逼真度的模拟靶机,在靶机机头、翼下等位置放置一定样式的可变 RCS龙勃透镜,可以得到类似实战中飞机的 RCS特性。通过控制龙勃透镜的反射面位置可以改变其 RCS数值,实现模拟靶机 RCS的数值变化。采用靶机挂载可变 RCS龙勃透镜对 MQ-1无人机前向 RCS起伏特性进行了模拟,取得了较好的效果,可为采用靶机挂载可变 RCS龙勃透镜模拟作战飞机的全向 RCS特性提供借鉴。     

航空发动机双层结构金属机匣的弹道试验

为研究航空发动机双层结构金属机匣在受叶片冲击时的包容性问题,利用滑膛炮试验系统对双层钛合金带不同间隙叠层靶板进行打靶弹道试验。通过28次有效的弹道试验发现:对比内层（迎弹面）、外层靶板厚度相同带间隙组合的试验结果,间隙越大靶板抗侵彻能力越差;对比不带间隙组合试验结果,内层较薄组合的抗侵彻能力强于内、外层厚度相同组合。采用商业有限元软件ANSYS/LS-DYNA对打靶试验进行了数值仿真,有限元仿真与试验结果吻合较好,并发现内层较薄组合的抗侵彻能力强于内层较厚组合,且两者均强于内、外层厚度相同组合;各个组合在没有间隙的情况下,弹道极限随叶片攻角增加而增加,但是速度曲线突增的攻角有所不同。无量纲靶厚决定了叶片冲击双层靶板的破坏模式。      

基于改进Yolov3 算法的舰船目标检测识别系统

针对复杂战场环境下对海目标检测识别的需求,设计了一种基于改进Yolov3 算法的海面舰船目标实 时检测识别系统。使用微调分类网络、增加训练尺度、聚类目标边框维度、二级特征分类等方法对Yolov3 检 测识别网络模型进行了优化,在提高识别精度的同时有效降低了漏检率和虚警率。实验结果表明,优化后的网 络模型在自建的舰船图像数据库中将检测识别平均准确率提高到了79.3%,对真实海上航拍视频中舰船目标识 别的平均准确率达到了81% 以上。     

Numerical simulation of aerodynamic interaction for a tilt rotor aircraft in helicopter mode

A rotor CFD solver is developed for simulating the aerodynamic interaction phenomenon among rotor, wing and fuselage of a tilt rotor aircraft in its helicopter mode. The unsteady Navier–Stokes equations are discretized in inertial frame and embedded grid system is adopted for describing the relative motion among blades and nacelle/wing/fuselage. A combination of multi-layer embedded grid and ‘‘extended hole fringe" technique is complemented in original grid system to tackle grid assembly difficulties arising from the narrow space among different aerodynamic components, and to improve the interpolation precision by decreasing the cell volume discrepancy among different grid blocks. An overall donor cell searching and automatic hole cutting technique is used for grid assembly, and the solution processes are speeded up by introduction of Open MP parallel method. Based on this solver, flow fields and aerodynamics of a tilt rotor aircraft in hover are simulated with several rotor collective angles, and the corresponding states of an isolated rotor and rotor/wing/fuselage model are also computed to obtain reference solution.Aerodynamic interference influences among the rotor and wing/fuselage/nacelle are analyzed,and some meaningful conclusions are drawn.     

机载单站无源定位三维模型及其仿真

针对在空间作匀速直线运动的目标，建立了机载单站无源定位的三维模型。给出了其中的预处理过程和系统状态方程，并采用UKF算法进行滤波处理以提高定位精度。仿真结果表明，模型和算法有效。与扩展卡尔曼滤波(EKF)相比，在初始误差较大时UKF也能快速收敛。     

同时地形高程测量和地面运动目标检测的分布式InSAR最优编队构形

分布式小卫星干涉SAR为了同时获得时间基线(用于地面运动目标检测)和空间基线(用于地形高程测量),采取空间立体编队构形(即非沿航向直线编队),然而这种混合基线的情况会导致地面运动目标与地形杂波存在相位耦合,而且只靠信号处理方法很难分离,这对于检测地面运动目标极为不利。提出几种最优编队构形,在保证获得两种干涉基线的同时,通过对消两对干涉SAR图像来抑制掉固定杂波,从而可以检测地面运动目标,这种方法具有处理简单和性能较好等优点。最后给出了仿真结果。     

SRM壳体/绝热层脱粘的XFEM

将扩展有限元法(XFEM)用于研究固体火箭发动机(SRM)壳体/绝热层的脱粘。将层隙型和紧贴型脱粘等效为双材料界面裂纹,建立了XFEM的双材料界面裂纹分析模型,并给出了其中核心算法——应变矩阵的求解,通过相互作用积分求出应力强度因子和能量释放率。算例结果表明,XFEM的计算结果与理论值的差异较小,可用于有效求解脱粘问题。     

机载目标状态估计器

研究基于空载雷达测量下的机动目标状态估计器的设计问题。通过建立直角坐标状态方程和选取一种伪测量量，并采用测量模型线性化的方法，建立起了估计器的基本结构，在此基础上增加距离通道的冗余滤波，进一步提高距离通道的估计精度，最后将估计器联入整个综合火力／飞行控制系统中，进行了Ｍｏｎｔｅ Ｃａｒｌｏ仿真，仿真结果表明，设计的目标状态估计器具有很好的跟踪估计性能。