Keck observations of ROSAT ultra-luminous X-ray source candidates

We present results of optical follow-up observations of candidate ultra-luminous X-ray sources (ULXs). Using Keck optical spectroscopy, 17 of the candidates from the Colbert and Ptak [Colbert, E.J.M., Ptak, A.F. A catalog of candidate intermediate-luminosity X-ray objects. ApJS 143, 25–45, 2002] catalog have been identified; this is one of the largest sets of optical identifications of such objects thus far. Fifteen are background active galactic nuclei (AGN); two are foreground stars in our Galaxy. These findings are consistent with background and foreground object expectations, as derived from log N–log S relations. Also, the results are briefly discussed in terms of the spiral-galaxy/ULX connection.     

多阶段任务系统通用可靠性仿真模型

归纳了当前多阶段任务系统(PMS,Phased Mission Systems)可靠性建模的基本假设,指出了解析模型描述和求解能力的不足以及仿真模型存在的难以转换的缺点.应用着色Petri网(CPN,Colored Petri Net) Tools建立PMS的多层通用仿真模型:顶层控制模型将PMS各阶段的故障树参数化,作为CPN通用仿真模型的输入;单阶段处理模型根据顶层控制模型的输入判别该阶段顶事件是否发生;底事件处理模型通过比较随机数和故障发生概率的大小产生故障.通用仿真模型可以保持模型结构的稳定,同时又简化了仿真模型的生成.案例对比了CPN仿真模型与二元决策图(BDD,Binary Decision Diagrams)算法的可靠性计算结果,证明了模型的正确性;具有动态变化参数的PMS仿真则说明了模型的适用性.      

全分布式通用火控系统供电控制技术

首先提出了一种全分布式通用火控系统的结构,然后以供电控制装置为对象进行了供电控制技术的研究,阐述了其功能、组成、实现方法和工作流程,最后分析了该装置的可靠性。     

延伸冲击孔冲击冷却流动与换热特性的数值研究

采用数值模拟方法研究了延伸冲击孔冲击冷却系统的冷却特性,分析了3个冲击雷诺数和5个冲击孔延伸长度对冲击腔内流动与换热特性的影响,给出了靶面努塞尔数分布、靶面压力分布、中心截面流速与综合换热性能的变化。结果表明：延伸冲击孔可以有效地防止横流对冲击射流的偏转作用,同时使射流出口更加贴近冲击靶面壁面,冲击速度更高,可以明显提高靶面的换热系数,并使整个靶面上的换热系数分布也更加均匀。冲击冷却的冷却性能随着冲击孔延伸长度的增加而增加,相较于传统冲击冷却（baseline）,在L/d=2.5时靶面平均努塞尔数提升达15%以上,但压力损失也相对较高;对比不同延伸长度冲击孔的综合换热性能,发现存在最佳的L/d取值范围使冲击冷却系统获得最佳的综合冷却性能。在本研究范围内,最佳的L/d= 2.5。     

央企所属研究所经济增加值管理探讨

介绍了经济增加值(EVA)相关理论,重点探讨了央企所属研究所EVA的增长途径。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

The Distributed CO in Comet Halley

Examination of the spatial distribution of CO intensity of Comet Halley indicates that a large fraction of CO originates from the refractory organic component in the coma, rather than directly from the volatiles in the nucleus. Based on the fluffy aggregate interstellar dust comet model, we have estimated the upper limits of the total amount of CO provided by coma dust. The implications from the comparison of the predicted results with the observed value have been discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

通用飞机梯形机翼的富勒襟翼滑轨轨迹研究

襟翼滑轨轨迹控制着襟翼的运动轨迹,决定着其几何特性,是飞机襟翼操纵系统滑轨机构工程设计的重要输入因素.提出一种设计襟翼滑轨轨迹的新方法,该方法对梯形机翼的富勒式襟翼运动进行简化,根据襟翼的运动规律,将其运动简化为近似绕翼尖外空间一点作圆锥曲面运动,并结合CATIA V5的模拟分析,最终设计出满足要求的襟翼滑轨轨迹.运12F飞机的工程应用实践表明,该方法对通用飞机的设计具有较高的实用价值.     

无人机总体与起飞性能匹配性设计优化

首先,提出了一种小推重比的低速螺旋桨无人机总体参数与起飞性能匹配性设计优化方法;其次,对该无人机起飞阶段的动力学和运动学特性进行了分析,明确了该无人机总体参数与起飞性能之间的最佳匹配关系,以实现无人机起飞性能的最优化;最后,通过分析得出结论:小推重比低速螺旋桨无人机总体设计参数的选取直接影响到起飞性能的优劣,“平衡”总体设计需求来发挥平台更佳的起飞性能是总体设计优化的重要内容.     

Autonomous navigation to quasi-periodic orbits near translunar libration points

Libration-point missions have been very useful and successful. Due to the unstable nat-ures of most of these orbits, the long-time stationkeeping demands frequent maneuvers and precise orbit determinat...