DO 28飞行试验数据一致性检验

 本文研究DO28试验机飞行试验数据一致性检验及其误差校正。建立了由非线性运动学方程及内容广泛的校正环节构成的一致性检验模型,解决了大地风场重构、测量信号时间延迟估计、ψ转换及测量控制信号的校正。为DO28参数估计提供了可靠、准确的飞行试验数据。     

用欧拉方程计算机翼与翼身组合体绕流

本文用保角转绘加剪切变换生成三维机翼与翼身组合体Ｃ－Ｈ型网格，并在这类网格拓扑上，用有限体积法研制出可供分析机翼与翼身组合体绕流的三维欧拉方程计算程序。本方法的特色是改进了机翼表面网格点的分布，使机翼后缘与网格线一致；采用了当量机身，使机岙表面到对称面光滑过渡；嵌入了边界层粘性修正。改善了计算结果。数值计算表明，对粘性影响较大的超临界绕流，边界层修正效果显著。     

基于6SPS并联机构标定新方法

系统研究6SPS并联机构标定的方法。研究中应用激光跟踪仪测量、基于并联机构正解和定位误差旋量的计算,正交试验进行试验设计,应用非线性最小二乘参数辨识。仿真验证辨识的几何误差可以等于假定值,试验验证位姿精度提高了10倍。     

Data reduction and correction algorithm for digital real-time processing of cosmic ray measurements: NM64 monitoring at Dourbes

We present a data correction algorithm for real-time data processing for the NM64 galactic cosmic ray neutron monitor at the Royal Meteorological Institute (RMI) in Dourbes, Belgium. The correction is based on three main tests: a continuity test, tube ratios test and a derivative test. The continuity test works as a high pass filter with a threshold based on the entire recorded dataset. Additionally, it monitors whether the logging takes place at regular intervals (continuously). The ratios test identifies noisy sections and the final derivative test criterion will identify single or double spikes by testing them against the median increase of the intensities. Using these criteria, all data from the cosmic ray station at Dourbes is corrected in real time. Test results have been compared with data from verified neutron monitor stations with a similar geomagnetic cutoff rigidity.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.     

基于双三次B样条插值的薄壁件加工误差补偿方法

以薄壁件加工过程为研究对象,针对薄壁件加工的误差预测、补偿问题,提出一种基于双三次B样条插值的薄壁件加工误差补偿方法.在获得薄壁件历史加工数据的基础上,运用插值理论建立误差模型,得到误差分布规律,考虑切削力与弹性变形之间的迭代影响建立误差补偿方法.该方法综合考虑了弹性变形、热误差、几何误差等多种误差源,通过数值分析方法建立误差模型,避免以往薄壁件误差建模中误差源分析不全、解析困难的弊端,最终以薄板工件为例,通过实验验证,应用该误差补偿方法可有效提高薄壁件的加工精度.     

无定向激光陀螺捷联惯组标定方法的对比研究

对三种无定向激光陀螺捷联惯组标定方法进行了对比研究,详细分析了各种方案的标定原理,提出了利用标准差作为评价标定方法优劣的指标.结合对某一激光陀螺捷联惯组标定试验结果的分析,得到了在无北向基准的情况下,三种标定方法在标定时间和标定精度两个指标上的对比结果,为无定向激光捷联惯组的标定提供了指导,具有较大的工程应用价值.     

流场可压缩性对涡相互作用影响的数值研究

涡相互作用作为冲压发动机喷注装置的典型抽象流动现象,研究其可压缩性影响对于认识包含化学反应的真实燃料喷射场具有一定基础理论价值。基于经过数值验证的可压缩Navier-Stokes算法与压力泊松方程初始条件设置方法研究流场可压缩性对涡相互作用演化过程的影响。结果表明,以较高涡旋马赫数表征的可压缩性在改变涡对形态的同时,具有延缓涡旋相互靠近,迟滞融合进程的作用。关于涡对系统开始融合的临界条件,可压缩相互作用开始的临界展弦比与无量纲时间相比于低速涡对明显提高。为在无量纲时间意义下统一不同马赫数涡对相互作用的进程,从涡心密度随时间变化规律出发在不可压涡对特征时间的基础上,初步构建了考虑可压缩性的时间尺度修正关系。     

基于高速存储平台的高性能RS编译码器设计

目前,星载高速存储设备中采用商用RS编译码IP核来实现数据纠错功能,能够实现的编译码最高速率为800 Mbps,只能依靠多个IP核同时工作达到吉比特高速数据存取速率的要求。星载存储数据发生错误的主要原因是存储区单粒子翻转和存储介质本身特性产生的单比特数据错误。针对星载存储数据的误码特性,本文提出一种RS编译码改进算法,通过对编码算法中的剩余多项式及译码算法中的伴随多项式进行降次处理,减小编译码过程中运算的迭代次数及计算量,以及对编译码算法中的基本运算单元有限域乘法器采用子项复用技术,实现对传统RS编译码算法的改进。结果表明改进后的编译码器能达到最高数据速率为10.5 Gbps,编码器资源较单个商用IP核减少15%,译码器资源减少40%,能够满足后续高速存储平台的应用要求。