L-band nighttime scintillations at the northern edge of the EIA along 95°E during the ascending half of the solar cycle 24

The characteristics of nighttime ionospheric scintillations measured at the L-band frequency of 1.575 GHz over Dibrugarh (27.5°N, 95°E, MLAT ～ 17°N, 43° dip) during the ascending half of the solar cycle 24 from 2010 to 2014 have been investigated and the results are presented in this paper. The measurement location is within or outside the zone of influence of the equatorial ionization anomaly depending on solar and geomagnetic activity. Maximum scintillation is observed in the equinoxes irrespective of solar activity with clear asymmetry between March and September. The occurrence frequency in the solstices shifts from minimum in the June solstice in low solar activity to a minimum in the December solstice in high solar activity years. A significant positive correlation of occurrence of scintillations in the June solstice with solar activity has been observed. However, earlier reports from the Indian zone (～75°E) indicate negative or no correlation of scintillation in June solstice with solar activity. Scintillations activity/occurrence in solstices indicates a clear positive correlation with Es recorded simultaneously by a collocated Ionosonde. In equinoxes, maximum scintillations occur in the pre-midnight hours while in solstices the occurrence frequency peaks just after sunset. The incidence of strong scintillations (S₄ ≥ 0.4) increases with increase in solar activity. Strong (S₄ ≥ 0.4) ionospheric scintillations accompanied by TEC depletions in the pre-midnight period is attributed to equatorial irregularities whereas the dusk period scintillations are related to the sporadic-E activity. Present results thus indicate that the current location at the northern edge of the EIA behaves as low as well as mid-latitude location.     

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.     

Spatial transformation of general sampling-aliasing frequency region for rotating-blade parameter identification with emphasis on single-probe blade tip-timing measurement

Blade-health monitoring is intensely required for turbomachinery because of the high failure risk of rotating blades. Blade-Tip Timing (BTT) is considered as the most promising technique for operational blade-vibration monitoring, which obtains the parameters that characterize the blade condition from recorded signals. However, its application is hindered by severe undersampling and stringent probe layouts. An inappropriate probe layout can make most of the existing methods invalid or inaccurate. Additionally, a general conflict arises between the allowed and required layouts because of arrangement restrictions. For the sake of economy and safety, parameter identification based on fewer probes has been preferred by users. In this work, a spatial-transformation-based method for parameter identification is proposed based on a single-probe BTT measurement. To present the general Sampling-Aliasing Frequency (SAFE) map definition, the traditional time–frequency analysis methods are extended to a time-sampling frequency. Then, a SAFE map is projected onto a parameter space using spatial transformation to extract the slope and intercept parameters, which can be physically interpreted as an engine order and a natural frequency using coordinate transformation. Finally, the effectiveness and robustness of the proposed method are verified by simulations and experiments under uniformly and nonuniformly variable speed conditions.     

Passive localization by a single moving observer using TOA only with unknown SRI: Observability analysis and algorithm

Passive localization by a single moving observer using Time of Arrival (TOA) only with an unknown Signal Repetition Interval (SRI) is investigated in this paper. Observability analysis is performed first. The observability condition for uniquely determining the emitter position and SRI is derived. The conditional Cramer-Rao Lower Bound (CRLB) is also analyzed. It is found that the ambiguity of the SRI integer of the first TOA does not affect the theoretical estimation precision of the emitter position and SRI. A Reference-Fixed Differential TOA (RFDTOA)-based Iterative Maximum Likelihood Estimator (IMLE) is proposed, which only needs O(M) computational operations. Theoretical analysis and simulation results show that the Mean Square Error (MSE) of the proposed algorithm could attain the CRLB with moderate Gaussian measurement noise.     

Collaborative image compression and classification with multi-task learning for visual Internet of Things

Widespread deployment of the Internet of Things(Io T) has changed the way that network services are developed, deployed, and operated. Most onboard advanced Io T devices are equipped with visual sensors that form the so-called visual Io T. Typically, the sender would compress images, and then through the communication network, the receiver would decode images, and then analyze the images for applications. However, image compression and semantic inference are generally conducted separately, and t...     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

小口径电热化学超高速发射实验研究

在小口径发射装置上进行了以液体发射药为化学工质的电热化学发射实验研究,采用不同的装药结构及装药量改进内弹道性能, 可使弹丸获得超高速。对电能释放与化学能释放过程的合理匹配表明, 等离子体能够增强液体药的燃烧并影响压力变化曲线。通过等离子体射流与液体药装填方式的控制, 如采用环状装药结构, 可以增进等离子体与发射药的相互作用, 提高内弹道性能     

ADS数据的处理和显示

基于航空卫星通信的飞行监视,即自动相关监视（ADS）,是航空卫星移动业务（AMSS）通信应用新领域,是建立在航空卫星通信基础上的一种新的飞行监视技术。该文介绍了基本ADS报告信息电文的组成及各部分的含义,着重阐述将所收到的ADS数据进行处理,并以直观易懂的表格及图象形式显示出来,便于确切地知道飞机的四维位置（纬度、经度、高度和时间）。     

现代对策论研究

对策论是研究斗争局势中冲突问题的数学理论,笔者长期以来在此领域进行了大量的研究探讨,本文概要介绍了主要工作。     

INTEGRATED GPS/INS OF PSEUDO-RANGE DELTA-RANGE SEMI-PHYSICAL SIMULATION'S RESEARCH

In order to further study the performance of tightly integrated navigation system of GPS/INS, a semi-physical simulation of tightly coupled system has been done based on the data gathered from the experiment of integrated system of GPS and INS. The closed-loop Kalman Filter and U-D discompose algorithm have been used. The simulation results associated to four integrated models of pseudo-range, delta-range, pseudo-range and delta-range alternation, and pseudo-range and delta-range synthesis have been provided, and the actual effects of variously integrated models have been analyzed. The results show that the pseudo-range and delta-range synthesis coupled model is the most effective to improve the coupled system performance and the individual delta-range coupled model had better be avoided in application.