The energy release of substorm and magnetic storm: Its present state and future improvements by KuaFu mission

Considering the KuaFu mission, state of the energy release of substorm and storm is simply presented and it’s improvements by KuaFu mission are investigated. The KuaFu mission will provide us an opportunity to improve our understanding of the energy release during the storm and the substorms. The two KuaFu-B satellites flying in 180° phase-lagged formation in a polar orbit will allow synoptic observations of the auroral oval, central plasma sheet, ring current and other regions. It can monitor the polar region 24/7 continuously. The advantage of the KuaFu mission is to provide the data during all phases of storm and substorm time that can be used to study the global energy release during all phases continuously. The data from auroral imager and other in-situ instruments on board KuaFu-B can be used to study the auroral dynamics and Joule heating during a storm and substorm. The data from the neutral atom imager instrument can be used to study the dynamics and the energy release in the ring current region from sudden commencement to complete storm recovery. Furthermore the data from KuaFu-A, which is around L1 point, can be used to study the interplanetary conditions along with the data from the plasma sheet to study the triggering process and energy release during a substorm. So, KuaFu mission with its continuous time monitoring facilities would enable us to make much progress towards solving the underlying problems.     

一枚Chaff火箭观测到的湍流谱

在一个异常强水平风速和极端大风切变层内, 垂直速度扰动谱表明几个相当重要特征:(1)垂直速度扰动谱有二个区域, 一个在低频区, 有谱斜率一1.65, 这个谱斜率接近于惯性子区内-5/3谱斜率, 另一个在高频区, 有谱斜率-7.11, 它接近于粘性子区内-7谱斜率.(2)垂直速度扰动谱有一个崩溃点, 约位于70m, 这与计算的内尺度有好的一致.(3)由垂直速度扰动谱计算的湍流能量耗散率是0.087m2·s-3, 这比MAP/WINE试验中得到的值约大一个数量级.      

非热电子束流在耀斑环中能量的沉积

本文计算了非热电子束流通过库仑碰撞和反向电流过程在均匀截面的耀斑环中的能量沉积,讨论了非热电子束流对耀斑软X射线等离子体的加热和耀斑非热模型的能量收支平衡问题。      

State of art on energy management strategy for hybrid-powered unmanned aerial vehicle

New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted.     

A new error-controllable method for smoothing the G01 commands

In real machining, the tool paths are composed of a series of short line segments, which constitute groups of sharp corners correspondingly leading to geometry discontinuity in tangent. As a result, high acceleration with high fluctuation usually occurs. If these kinds of tool paths are directly used for machining, the feedrate and quality will be greatly reduced. Thus, generating continuous tool paths is strongly desired. This paper presents a new error-controllable method for generating continuous tool path. Different from the traditional method focusing on fitting the cutter locations, the proposed method realizes globally smoothing the tool path in an error-controllable way. Concretely, it does the smoothing by approaching the newly produced curve to the linear tool path by taking the tolerance requirement as a constraint. That is, the error between the desired tool path and the G01 commands are taken as a boundary condition to ensure the finally smoothed curve being within the given tolerance. Besides, to improve the smoothing ability in case of small corner angle, an improved local smoothing method is also proposed by symmetrically assigning the control points to the two adjacent linear segments with the constrains of tolerance and G3 continuity. Experiments on an open five-axis machine are developed to verify the advantages of the proposed methods.     

Experimental investigation on dynamic response of flat blades with underplatform dampers

One test rig with three blades and two Under-Platform Dampers (UPDs) is established to better understand the dynamical behavior of blades with UPDs. A pre-loaded spring is used to simulate the centrifugal load acting on the damper, thereby achieving continuous adjustment of the pressing load. UPDs with different forms, sizes and materials are carefully designed as experimental control groups. Noncontact measurement via a laser Doppler velocimeter is employed and contact excitation which is performed by an electromagnetic exciter is adopted to directly obtain the magnitude of the excitation load by a force sensor mounted on the excitation rod. Particular attention is paid to the influence of the contact status of the contact surfaces, e.g. the pressure-sensitive paper is used to measure the effective contact area of the UPDs. The experimental variables are selected as the centrifugal force, the amplitude of the excitation force, the damper mass, the effective contact area, and the damper material. The Frequency Response Function (FRF) of the blade under different experimental parameters is obtained by slow frequency sweep under sinusoidal excitation to study the influence of each parameter on the dynamic characteristics of the blade and the mechanism analysis is carried out combined with the experimental results.     

基于局部主动轮廓模型的飞机壁板铆接孔定位方法研究

对飞机壁板铆接孔的定位方法进行了研究,提出了一种基于局部主动轮廓模型的铆接孔定位方法。首先通过基于灰度直方图的全局阈值分割和形心法进行铆接孔的粗定位;然后以粗定位坐标为圆心建立遍历圆,并以遍历圆作为限制条件构造能量圆,建立能量方程求解遍历圆内能量最小的像素点为铆接孔的精定位位置;最后进行视觉引导铆接孔定位试验,试验测得定位误差小于0.05mm,满足飞机壁板自动铆接的工艺要求,且比传统的区域主动轮廓模型定位精度高,具有一定的可行性。     

分区扫描对激光沉积成形钛合金T型接头温度场与应力场的影响

从分区扫描可以有效降低激光沉积成形大尺寸结构残余应力的工程经验出发,采用热弹塑性有限元理论,建立可以模拟成形过程温度场与应力场的有限元模型,研究不同分区扫描方式对激光沉积成形钛合金T型接头温度/应力演变过程、监测点热循环曲线以及残余应力的影响。结果表明:热应力与残余应力最大值均出现在T型接头上缘条与基板接触的4个外角点上,与分区扫描方式无关;分区扫描对T型接头外角点与短边外面中点影响较小,对于内部节点、内角点与长边外面中点的热循环曲线及热应力曲线有一定的影响;分区扫描对残余应力分布影响较大,尤其是对沿指定截面残余应力分布规律与最大残余应力幅值有显著的影响。     

航天高强不锈钢LMD成形缺陷分析及控制

为明晰航天高强不锈钢激光熔化沉积成形过程基础科学问题,推动其在航天液体火箭发动机领域的应用进程,针对航天高强不锈钢LMD成形过程中常见表面焊瘤、气孔、熔合不良等缺陷的形貌特征及产生机理进行深入分析,并提出对应的控制措施:通过优化边框扫描速度促进熔覆道的流动变形,极大减少了成形件侧表面及倾斜面的焊瘤缺陷; 使用PREP方...     

NiCo/Cu多层纳米线的制备、表征以及磁化反转机制研究

采用电化学沉积在多孔氧化铝模板中制备了NiCo/Cu多层结构纳米线,并使用扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征了纳米线的形貌和微观结构。透射电子显微镜的结果表明,通过控制阶梯电位时间,制备的铁磁层厚度为100nm,非铁磁层厚度为10nm。结合选区电子衍射技术(SAED)与X射线衍射分析技术(XRD),确定多层纳米线的晶格结构是面心立方(FCC)。在分析多层纳米阵列的微观结构之后,使用振动样品磁强计(VSM)测量磁滞回线。结果表明,随着Co含量的增加,多层纳米线的矫顽力升高。当多层纳米线中Co含量为10%和30%时,易磁化轴垂直于纳米线,当Co含量为70%和90%时,易磁化轴平行于纳米线。最后,对纳米线磁化翻转机制进行微磁学模拟分析得出,当外加磁场垂直于纳米线时,磁化反转机制是形核机制;当外加磁场平行于纳米线时,磁化反转机制是卷曲机制。