高温热处理与C/C复合材料性能关系研究

采用整体炭毡为增强坯体,经过化学气相渗透(CVI)及树脂浸渍/炭化(PIC)工艺制备成整体毡C/C复合材料样品,对样品连续进行了3次2 500℃以上的高温热处理(HTT)。材料性能测试结果表明,3次HTT后材料z向抗拉强度由16.7MPa下降到8.87MPa,抗压强度由129.0MPa下降到72.7MPa,抗弯强度由35.7MPa下降到17.6MPa,抗剪强度由34.4MPa下降到18.7MPa;xy向室温(RT)~1 000℃的平均线膨胀系数由1.55×10-6K-1降低到1.13×10-6K-1;800℃的热导率由106.91 W/(m.K)降低到61.27 W/(m.K),比定压热容由2.56 kJ/(kg.K)下降到1.93 kJ/(kg.K);z向变化趋势基本相同。     

空间等离子体源与测试系统设计

文章介绍了空间等离子体源与测试系统的设计方法。为了实现具有较高能量的低密度等离子体环境,首先在源入口处设计水平与垂直两种微波输入模式,提高电子的密度和温度,然后在源出口处设计装有几何调节栅和电位调节网的扩散杯,调节电子密度和温度。     

基于虚温定义的粘弹性有限元方法

基于NARAYANASWAMY提出的虚温定义,用虚温表示的温度变化产生的折算应变率替代Swanson模型中的应变率修正函数,获得了基于虚温定义的粘弹性材料的应力应变本构方程,并导出基于虚温定义的粘弹性非线性有限单元法计算公式。计算结果验证了此基于虚温定义的粘弹性分析方法的正确性。     

Application of Autoscala to ionograms recorded by the VIPIR ionosonde

In November 2008, the ionosonde station at Boulder, Colorado, USA (40.0°N; 105.3°W) became the host of a new ionosonde (VIPIR, Vertical Incidence Pulsed Ionospheric Radar) developed and built by Scion Associates.     

An analysis of the topside ionosphere parameters based on the long-duration Irkutsk incoherent scatter radar measurements

The topside ionosphere parameters are studied based on the long-duration Irkutsk incoherent scatter radar (52.9N, 103.3E) measurements conducted in September 2005, June and December 2007. As a topside ionosphere parameter we chose the vertical scale height (VSH) related to the gradient of the electron density logarithm above the peak height. For morphological studies we used median electron density profiles. Besides the median behavior we also studied VSH disturbances (deviations from median values) during the magnetic storm of September 11th 2005. We compared the Irkutsk incoherent scatter radar data with the Millstone Hill and Arecibo incoherent scatter radar observations, the IRI-2007 prediction (using the two topside options) and VSH derived from the Irkutsk DPS-4 Digisonde bottomside measurements.     

A topside investigation over a mid-latitude digisonde station in Cyprus

We examine the systematic differences between topside electron density measurements recorded by different techniques over the low-middle latitude operating European station in Nicosia, Cyprus (geographical coordinates: 35.14^oN, 33.2^oE), (magnetic coordinates 31.86^oN, 111.83 ^oE). These techniques include space-based in-situ data by Langmuir probes on board.European Space Agency (ESA) Swarm satellites, radio occultation measurements on board low Earth orbit (LEO) satellites from the COSMIC/FORMOSAT-3 mission and ground-based extrapolated topside electron density profiles from manually scaled ionograms. The measurements are also compared with International Reference Ionosphere Model (IRI-2016) topside estimations and IRI-corrected NeQuick topside formulation (method proposed by Pezzopane and Pignalberi (2019)). The comparison of Swarm and COSMIC observations with digisonde and IRI estimations verifies that in the majority of cases digisonde underestimates while IRI overestimates Swarm observations but in general, IRI provides a better topside representation than the digisonde. For COSMIC and digisonde profiles matched at the F layer peak the digisonde systematically underestimates topside COSMIC electron density values and the relative difference between COSMIC and digisonde increases with altitude (above hmF2), while IRI overestimates the topside COSMIC electron density but after a certain altitude (~150 km above hmF2) this overestimation starts to decrease with altitude. The IRI-corrected NeQuick underestimates the majority of topside COSMIC electron density profiles and relative difference is lower up to approximately 100 km (above the hmF2) and then it increases. The overall performance of IRI-corrected NeQuick improves with respect to IRI and digisonde.     

大气总温传感器误差修正方法研究

大气总温的准确测量对民用飞机的飞行安全至关重要。以古德里奇公司的102CP2AG总温传感器为例．详细论述了总温测量过程中对恢复系数、时间常数、自加热、防冰加热等误差的修正原理与使用方法。     

Electron density profile calculation technique for Autoscala ionogram analysis

An electron density profile model with free parameters is introduced. Initially the parameters are calculated on the basis of the ionospheric characteristics automatically obtained from the ionograms by Autoscala and considering the helio-geophysical conditions. The technique used to adjust the free parameters to the particular ionograms recorded is presented.     

低温动态准双轴拉伸加载下HTPB推进剂的热老化性能

为分析热老化后三组元端羟基聚丁二烯(HTPB)推进剂在低温动态准双轴加载下的性能，开展了不同热加速老化时间、不同温度和应变率条件下推进剂的准双轴拉伸力学性能试验及扫描电镜(SEM)观察试验。试验结果表明：热加速老化前后，推进剂的拉伸曲线趋势、力学性能变化规律及细观损伤形式保持一致，改进型非线性模型能够更好地描述1~100 s -1 应变率范围内典型力学性能参数随热老化时间的非线性变化关系。随温度降低，老化后推进剂的断面形貌由“脱湿”变为AP颗粒断裂，热老化、低温以及高应变率载荷的叠加使得推进剂的细观损伤变得更加严重，但准双轴拉伸时损伤程度相比单轴拉伸时有所减弱。热老化32 d、74 d和98 d后-50 ℃、 14.29 s -1 加载条件下的最大伸长率分别为未老化时室温、0.40 s -1 条件下数值的28.79%、27.58%和25.63%，该参数定义可为分析长期贮存后战术导弹SRM药柱在低温点火条件下结构完整性失效的准则提供数据支持。     

某型机吊声液压系统温升试验现象分析

本文论述了高温对液压系统的影响和液压系统温升较快的原因。从某型机吊声液压系统温升试验现象出发,分析了其产生的原因。提出了改进建议,并指出地面试验与该型机吊声液压系统实际工作环境的区别。