一种微波等离子体原子氧模拟装置

介绍了一种新颖的原子氧模拟试验装置。该装置采用了微波电子回旋共振（ｅｌｅｃｔｒｏｎｃｙｃｌｏｔｒｏｎｒｅｓｏｎａｎｃｅ简称“ＥＣＲ”）的先进技术。最佳调试状态下，可获得１０（１５）／（ｃｍ２·ｓ）的束流。在该试验装置上，对航天器上常用的Ｋａｐｔｏｎ和石墨环氧材料进行了原子氧效应试验，首次在国内成功的获得了原子氧束流模拟试验的样品结果。对样品的表面形貌分析证明：试验结果完全与国外同类设备的试验结论一致，这标志着中国在原子氧地面模拟技术领域的研究已取得重要进展。     

空间任意形状凸面的轨道空间外热流计算方法

采用蒙特卡罗（ＭｏｎｔｅＣａｒｌｏ）方法，进行了平板、半球面、抛物面的地球反照角系数和地球红外角系数计算，通过与文献数据的比较，证明了由此方法所编程序的可靠性和实用性。利用这种方法，可以计算空间任意形状凸表面的轨道空间外热流。     

利用MF雷达对耀斑期间电离层D区电子密度的观测研究

利用MF雷达观测资料对X级别耀斑爆发期间在66-80km高度之间的电子密度进行了研究，观测到了耀斑爆发期间电子密度的突然增加，在较低高度上的电子密度的时间变化趋势与耀斑的软X射线辐射通量相关．电子密度的变化强度依赖于具体的耀斑参数，有些耀斑引起的电子密度增加高达400cm^-3，有些仅为100cm^-3左右．但耀斑期间在这一高度区间增加的总电子含量增量仅占耀斑辐射引起的整个电离层总电子含量增量的千分之一左右．最后，利用恢复阶段电子密度的时间变化过程估算了1997年11月4日耀斑期间部分高度上的有效复合系数．     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

考虑可压缩与热传导的壁面函数边界条件及其应用

考虑到可压缩和热传导效应的壁面函数边界条件,被耦合到了采用k-ω两方程湍流模型、用有限体积法求解N-S方程的程序中。壁面函数基于耦合的速度和温度型,并且在边界层内的粘性子区和对数区内一致有效。引入壁面函数边界条件后,通过算例验证在y <100的范围内,得到的物面压力、摩阻、热流与实验结果比较,结果可靠。而无壁面函数边界条件时,要得到相同精度的结果,要求y ≈1。壁面函数的引入,为工程上准确预测飞行器在湍流流动中表面受力与气动热提供了保障。     

日照边缘区域电离层对耀斑的响应特点研究

利用MSIS模型和背景太阳辐射谱模型,在一定大耀斑辐射谱假设的前提下,计算了耀斑期间日照边缘区域的电子产生率,分析了这一区域电离层电子密度的变化特点.结果表明,大耀斑期间在日照边缘区域,甚至大于太阳天顶角90°的区域都有明显的电子产生率的增加.从不同太阳天顶角处的电子产生率剖面的形态来看,随着天顶角的增加最大电离率减少,但高度增加.计算还显示了在太阳天顶角小于90°的区域内电子产生率的垂直分布有明显的双峰结构,这种结构对应着电离层的E区和F区,但在天顶角大于90°区域,F区的电子产生率要大得多.考虑到离子和电子的复合过程,这一区域的总电子含量的增加主要产生在高F区.      

A swept fin-induced flow field with different height mounting gaps

In order to apply the air fin successfully and ensure the maneuverability of hypersonic vehicle, a key problem to be studied urgently is the heat flux brought by the fin mounting gap. The appearance of mounting gap and fin shaft can induce many complex flow structures which need more attentions to be investigated. Under Ma 6, Nano-tracer-based Planar Laser Scattering (NPLS) and Temperature Sensitive Paints (TSP) were applied to visualize and measure transient flow structures and heat flux distribution of a swept fin-induced flow field with different height mounting gaps. Complementarily, Reynolds-averaged N-S equations were solved with k-ω SST turbulent model. The heat flux distribution results of numerical simulation and TSP observed the change of high heat flux region with different mounting gap, both in position and magnitude. The streamlines based on Computational Fluid Dynamics (CFD) and flow visualization results obtained by NPLS revealed the cause of high heat flux region. The high heat flux region in this flow field is mainly related to the reattachment of vortex and flow stagnation. The increase of gap height can lead to stronger gap overflow and shaft-induced horseshoe vortex, which are source of the high heat flux around the fin. The case with the highest mounting gap (4 mm) en-counters the most severe aerodynamic heating, both on the surface of fin and plate. Thus, under the premise of ensuring the flexibility of the fin, the gap should be set as small as possible.     

热控涂层电子辐照效应

研究防静电Kapton二次表面镜(ITO/Kapton/Al)、S781白漆两种典型热控涂层,在不同能量电子辐照后太阳吸收比退化情况,并利用X射线光电子能谱和扫描电子显微镜对样品表面的成分和形貌进行了分析。结果表明:相同电子注量下,不同能量电子对样品的太阳吸收比退化作用程度是有区别的。而样品光谱反射率、表面形貌、表面成分的损伤效应类似,说明不同能量电子辐照下,样品的退化机理是一致的。     

某型航空发动机滑油供油系统压力和流量仿真

利用英国商用流体系统仿真软件FLOWMASTER对在中间状态下某型发动机滑油供油系统的压力和流量进行了仿真,总结分析了不同供油温度对该系统流阻特性的影响趋势,根据仿真结果给出了该系统结构的改进建议。     

7050铝合金喷水淬火参数对表面换热系数的影响

设计了喷射压强(p)与喷射表面流量密度(qs)作为独立参数的7050铝合金末端喷水淬火实验,研究了p,qs和喷嘴大小(d)对喷水表面换热系数的影响。结果表明,表面换热系数在喷射端面温度为100～150℃时具有最大值(hmax),hmax波动范围为20000～50000 W·m-2·℃-1;建立了反映p和qs影响换热系数规律的hmax-p-qs三维关系图;采用喷射表面面积与喷嘴面积的比值k反映喷嘴大小对换热系数的影响,建立了hmax-k-qs三维关系图;hmax-p-qs和hmax-k-qs关系图能为喷水淬火参数(p,qs,k等)设计提供参考。