高摩擦性能碳／碳复合材料的微观结构

使用激光拉曼探针和电子显微术对试样的断裂面和薄膜样品观察及电子衍射技术研究了两种抗摩擦性能相差悬殊的碳／碳复合材料的微观结构，发现两种材料的微观结构在石墨晶体的结晶结构完整性和取得性以及纤维和基体间的界面行为上有显著差异。     

热控涂层电子辐照效应

研究防静电Kapton二次表面镜(ITO/Kapton/Al)、S781白漆两种典型热控涂层,在不同能量电子辐照后太阳吸收比退化情况,并利用X射线光电子能谱和扫描电子显微镜对样品表面的成分和形貌进行了分析。结果表明:相同电子注量下,不同能量电子对样品的太阳吸收比退化作用程度是有区别的。而样品光谱反射率、表面形貌、表面成分的损伤效应类似,说明不同能量电子辐照下,样品的退化机理是一致的。     

TC11电子束焊接接头组织分析

以20mm厚TC11电子束焊接试样为研究对象,进行金相分析和显微硬度测试。对20mm板厚TC11钛合金电子束焊接接头组织及显微硬度进行了分析研究。比较分析了接头的焊缝、热影响区及各过渡界面的组织状态,并对不同组织的形成机理进行了阐释。     

碱金属引射下的高超声速尾流的数值模拟

高超声速化学非平衡尾流的分析与计算是空气动力学中的一个重要课题。本文采用二阶精度的中心差隐格式，求解了抛物化的Ｎ－Ｓ方程，得到了高空２０ＫＭ及６０ＫＭ非平衡尾流的数值解，研究了碱金属引射对尾流电子密度的影响。计算结果表明引射碱金属对尾流电子密度影响明显，尾流电子密度因此增加了１～３个量级。文中化学反应模型采用十组元模型，组元包括Ｏ２、Ｎ２、Ｏ、Ｎ、ＮＯ、ＮＯ＋、Ｏ－２、Ｎａ、Ｎ＋ａ以及ｅ－。     

CT技术在航天产品检测中的应用

分析了航天产品对无损检测的需求 ,介绍了工业CT的技术特点 ,并通过具体检测实例 ,描述了工业CT技术在卫星产品检测中的应用 ,最后给出实际应用结果     

小型化电子回旋谐振微波离子推进器研究

常规的电推进技术是针对大卫星应用而研制的，体积大、功耗高，不能满足小卫星飞速发展的实际需要。针对小卫星对电推进器的要求，提出了利用电子回旋谐振微波放电技术，采用微波同轴放电腔体的小型化离子推进器。由于同轴传输线不存在截止波长，放电腔体的直径选择非常灵活，可以适应小卫星的低供电能力和对体积重量的要求。实验样机的直径为50mm，在微波功率为30W，加速电压1．2kV，减速电压0．2kV的条件下，等离子体的电子密度达到了4．6×10^16／m^3，推进器的离子束流也达到6mA。实验样机的体积大大低于常规波导谐振腔微波离子推进器，实现了小型化，基本满足了小卫星对电推进器的体积重量要求。     

Estimation of probability of occurrence of F1 layer or L condition using tables and electron density profile models

An algorithm is proposed for evaluation of the probability of occurrence of an F1 layer or L condition, based on tables. Observations independent of the tables database are used for comparison between the estimated probability of occurrence, the formulation used at present in IRI, and the occurrence actually observed. The importance of the inclusion of L condition in the electron density profile model is shown.     

Special Technologies Related to Electron Beam Welding

In order to improve the manufacturing quality of electron beam welding,some technologies are developed by using the special features of electron beam.Comparing with the conventional electron beam welding,the usage of multi-beam technology and micro-beam technology are introduced.In addition.the development of beam diagnostic system is also presented.     

The influence of in situ pitch-angle cosine coverage on the derivation of solar energetic particle injection and interplanetary transport conditions

Modelization of solar energetic particle (SEP) events aims at revealing the general scenario of SEP injection and interplanetary propagation and relies on in situ measurements of SEP distributions. In this paper, we study to what extent the LEFS60 and LEMS30 electron telescopes of the Electron Proton Alpha Monitor (EPAM) on board the Advanced Composition Explorer are able to scan pitch-angle distributions during near-relativistic electron events. We estimate the percentage of the pitch-angle cosine range scanned by both telescopes for a given magnetic field configuration. We obtain that the pitch-angle coverage is always higher for LEFS60 than for LEMS30. Therefore, LEFS60 provides more information of the directional distribution of the observed particles. The aim of the paper is to study the relevance of the coverage when fitting LEFS60 particle measurements in order to infer the solar injection and the interplanetary transport conditions. By studying synthetic electron events, we obtain that at least 70% of the pitch-angle cosine range needs to be scanned by the telescope. Otherwise, multiple scenarios can explain the data.     

Intermediate-term periodicities in relativistic solar electron fluences during solar cycles 22 and 23

In this paper, we have investigated the intermediate-term periodicities of the relativistic (E > 10 MeV) solar electron flares measured by IMP-8 satellite of NASA for the time period of 1986–2001. This period of investigation includes the entire solar cycle 22; ascending, maximum and a part of descending phase of the current solar cycle 23. To determine accurately the occurrence rate of electron flux, we have employed three different spectral decomposition techniques, viz. fast Fourier transformation (FFT); maximum entropy method (MEM) and Lomb–Scargle periodogram analysis method. For solar cycle 22, in the low frequency range, power spectrum analysis exhibits statistically significant periodicities at ∼706, ∼504 and ∼392 days. In the intermediate frequency range, we have found a series of significant periodicities ∼294, ∼221, ∼153, ∼86, ∼73 and ∼66 days. For short term, periodicities of ∼21–23, ∼31 and ∼37 days were found in power spectrum. When solar cycle 23 is considered the significant periodicities are ∼20, ∼23, ∼29, ∼39, ∼54, ∼63, ∼118, ∼133 and ∼154 days. These results provide evidence that the best known Rieger period (∼153 days), appeared in the high energetic electron flux data for cycle 22 and also likely during maxima of cycle 23. The existence of these periodicities has been discussed in the light of earlier results.