常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点,尝试将永磁体引入至制动器驱动结构中,设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件,采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明,电磁与永磁两磁场耦合性较好,电磁吸力随电流增加及气隙的减小增幅较大,且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大,对电磁制动器轻量化研究具有指导意义。     

低剂量电离辐射环境下微生物群落物种多样性的产生和维持机制

空间站微生物严重滋生现象表明：在低剂量电离辐射（Low-Dose Ionizing Radiation,LDIR）环境下,微生物群落物种多样性水平大大增加,其机制目前尚不清楚。在前期调查和具体实验观测的基础上,本研究首次提出LDIR能够使微生物群落中的物种产生不同程度的生长延迟效应,从而减小了物种之间的竞争排斥,诱导并维持了微生物群落的物种多样性。本研究基于经典的Lotka-Volterra竞争模型,将生长延迟时间环节引入其中,得到LDIR下微生物群落的演替模型,在Matlab/Simulink平台上进行大规模的计算机仿真实验,获得LDIR下微生物多样性产生和维持的动力学机制,得到结果可为认识低剂量电离辐射环境下微生物群落的演替过程提供科学的理论依据。     

深空辐射条件下EDFA波分复用性能研究

随着对空间试验卫星光通信系统数据容量需求的逐年增加,空间波分复用技术将成为拓展通信容量的有效手段,需要研究掺铒光纤放大器(Erbium Doped Fiber Amplifier,EDFA)波分复用特性在深空辐射条件下的性能变化情况。研究了深空辐射及温度场对EDFA的性能影响、非均匀特性,建立了深空辐射条件下EDFA的波分复用(Wavelength Division Multiplexing,WDM)技术信号之间的增益影响模型,给出了增益的非均匀变化影响的评估方法。并分别采用电子和中子作为辐射源,进行了地面模拟深空辐射环境的辐射电离效应和辐射位移效应实验,实验结果进一步验证了该模型正确性。利用该模型,可获得深空辐射环境中,不同辐射类型、不同温度下,EDFA在WDM应用时各波长增益的非均匀特性,可为深空光通信中EDFA的WDM应用提供参考。     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

Comptonization of low-frequency radiation in accretion disks: Angular distribution and polarization of hard X-ray radiation

We present the results of computation for angular distribution and polarization of radiation for the set of the disk Thomson optical depth values.     

Whole-process modeling of titanium disc forming for gradient distributions of temperature and deformation

Gradient distributions of temperature and deformation (GDTD) are crucial for achieving dual-performance discs of titanium alloys which is required by the service environment of aeroengine. However, heating, cooling and deforming sequence in the whole process of the titanium disc forming, which leads to difficulties for achieving GDTD due to a lot of parameters. To solve this problem, a whole-process model of the titanium disc forming for GDTD has been established. In the model, heating and cooling via heat radiation, conduction and convection, and deforming by local loading with mold chilling are all considered. Experiments on heating and cooling as well as deforming were carried out by using a furnace and the Gleeble-3500 machine. The experimental data are used to determine thermal parameters and constitutive relations of the IMI834 titanium alloy, and then to verify the reliability of the model. Then the model was used to simulate the evolution rules of temperature and deformation of the titanium disc. The results show that the heating surface, furnace temperature, billet profile and loading rate play the core role for the control of GDTD, and thus a set of parameters were determined. Therefore, this work provides a base for developing a new forming technology of the dual-performance titanium discs with the approach of local heating and local loading.     

A Novel Magnetic Configuration for Space Radiation Active Shielding

Space radiation has been identified as the main health hazard to crews involved in manned Mars missions. Active shielding is more effective than passive shielding to the very energetic particles from cosmic rays. Particle motion in a magnetic field is studied based on the single-particle theory and Monte Carlo method. By comparing the shielding efficiency of different magnetic field configurations, a novel active magnetic shielding configuration with lower mass cost and power consumption is proposed for manned Mars missions. The new magnetic configuration can shield 92.8% of protons and 84.4% of alpha particles with E < 4 GeV·n-1, when considering the passive shielding contribution of 10.0 g·cm-2 Al Shielding, the required magnetic stiffness can be reduced from 27 Tm to 16 Tm. The detailed analysis of mass cost and power consumption shows that active shielding will be a promising means to protect crews from space radiation exposure in manned Mars missions.      

Prospects of de-tumbling large space debris using a two-satellite electromagnetic formation

Capturing large space debris with complex rotational motion is extremely challenging. A de-tumbling phase before capturing may be necessary to reduce the risk of collision with debris. This paper proposes a new noncontact de-tumbling method using a two-satellite electromagnetic formation, in which two small electromagnetic satellites, each having a high-temperature superconducting coil, generate control torques to reduce the rotation rate of debris prior to making any physical contact. The electromagnetic interaction of the target-satellite system is analyzed. A relative translational dynamics of the target–satellite system and the attitude dynamics of the target are established. Simulation results show that the proposed method effectively eliminates the rotational motion of the target. It can be safely concluded that the noncontact method for de-tumbling space debris using a two-satellite electromagnetic formation is feasible and potentially applicable to on-orbit capture.     

空间粒子辐射对卫星中集成芯片的影响

本文分析了在“风云一号(B)”气象卫星环境中各种粒子辐射在集成芯片临界体积中产生的能量沉积, 即LET(线性能量传输);得到了银河宇宙线1≤Z≤28、银河宇宙线异常成分(C、N、O、Ne、Ar、Fe)、内辐射带质子等产生的LET, 计算了其分别产生的单粒于事件(SEU)翻转率。      

航天器天线有关技术的论述

论述了航天器天线的特点及其与航天器总体的关系;天线的辐射场方向图及增益有关问题;天线的电磁兼容及天线的计算机辅助设计。