小突片对热射流红外辐射的影响研究

实验研究了收敛喷管在高温（约913K）、高速（超临界）流动状态下，加装小突片后对热排气的红外辐射抑制特性，并探讨了小突片安装片数、后倾角度、堵塞比等因素对红外辐射抑制特性的影响。结果表明，小突片对热排气的红外辐射具有明显的抑制作用，与不装小突片的相比，不仅使热排气的核心区长度大为缩短，而且使热排气的总体红外辐射信号大幅度下降（在实验范围内，最大可下降约73％）。     

收扩喷管加小突片对尾喷流红外辐射的影响

针对收扩喷管,在高温(约640℃)、高速(超音速)流动状态下,实验研究了加装小突片后对飞机发动机尾喷流红外辐射的抑制效果,并探讨了小突片堵塞比、小突片后倾角度等因素对红外辐射抑制特性的影响。结果表明,小突片对热射流的红外辐射具有明显的抑制作用,不仅使热射流的核心区长度大为缩短,而且使热射流的总体红外辐射信号大幅度下降(在本文实验范围内,最大可下降约57%)。      

带有双层壁扩压器的波瓣喷管混合流场的数值计算

采用三维贴体曲线坐标网格,边界网格加密且正交,在整个计算区域进行全场计算。为避免因波瓣造成的网格强烈的非正交引起解的发散,采用了Chen和Kim修正的k-ε湍流模型及同位网格SIMPLC计算方法,对带有双层壁扩压器的波瓣喷管混合流动进行了数值计算和分析。对波瓣及双层壁,采用大粘性的方法解决流固耦合。计算结果表明:在双层壁间有外界冷气流被引射进入,形成了壁面的冷却气流;自波瓣出口截面沿流向产生的环流速度场,强化了主次流的掺混,速度分布渐趋均匀。计算结果与实验数据符合良好,二者在离开波瓣52 mm的混合管内相对主流速度的最大误差为21.65 %。     

UVCS/SOHO Observations of Spectral Line Profiles in Polar Coronal Holes

Ultraviolet emission line profiles have been measured on 15-29 September 1997 for H I 1216 Å, O VI 1032, 1037 Å and Mg X 625 Å in a polar coronal hole, at heliographic heights ? (in solar radii) between 1.34 and 2.0. Observations of H I 1216 Å and the O VI doublet from January 1997 for ? = 1.5 to 3.0 are provided for comparison. Mg X 625 Å is observed to have a narrow component at ? = 1.34 which accounts for only a small fraction of the observed spectral radiance, and a broad component that exists at all observed heights. The widths of O VI broad components are only slightly larger than those for H I at ? = 1.34, but are significantly larger at ? = 1.5 and much larger for ? > 1.75. In contrast, the Mg X values are less than those of H I up to 1.75 and then increase rapidly up to at least ? = 2.0, but never reach the values of O VI.     

谐振腔隔板对微波等离子推力器特性的影响

为了探索微波等离子推力器谐振腔内电介质隔板对腔内电磁场及谐振频率的影响规律，用时域有限差分法（FDTD）和离散Fourier变换（DFT）法，对内有隔板，谐振模式为TM011模的谐振腔电磁场及谐振频率进行了数值分析，计算结果表明，隔板的存在不但使腔内轴向电场强度减小，而且使腔的谐振频率向低频方向偏移，隔板厚度愈厚，引起的轴向电场强度的减小和频偏愈大，这些结论为谐振腔隔板的设计，选材，以及谐振腔的设计和调谐提供了理论依据。     

再入体实验模型热化学非平衡绕流流场的数值分析

利用数值求解一个和多个振动温度热化学非平衡Navier-Stokes方程的CFD计算程序,对爆轰风洞球锥试验模型的热化学非平衡绕流流场进行了数值模拟,分析了分子组分振动温度在全流场(头身部流场和底部流场)中的分布规律.研究结果表明:(1)计算的压力、电子数密度以及流场的光辐射数据与试验数据符合较好;(2)在再入体身部,大多数分子的振动温度峰值大大高于平动温度的峰值;在再入体近尾出现振动温度冻结并大大高于平动温度的现象;CO2的两个振动态的振动温度分布非常接近平动温度分布.     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

涡扇发动机轴对称引射收敛喷管红外辐射特性

数值研究了涡扇发动机轴对称引射收敛喷管的红外辐射特性.排气系统的流场计算采用商用数值模拟软件,红外辐射特性计算采用自主开发的软件NUAA-IR,计算分析了轴对称收敛喷管和引射收敛喷管在3~5μm波段红外辐射特性以及喷管内不同固体壁面在探测方向上的红外辐射贡献.结果表明:引射收敛喷管的红外抑制作用主要在于引射加强了尾喷流与环境大气的掺混,减小了尾喷流的长度,降低了燃气流的红外辐射;引射收敛喷管对喷管内固体壁面的遮挡以及降温作用很小,只在方位角为20°方向上对内涵壁面、外涵内壁等中低温壁面有效;引射收敛喷管的总积分辐射强度在方位角为0°~15°范围内与收敛喷管几乎相等,在其他方位角范围内均小于收敛喷管,且在方位角为40°方向上降低幅度达到最大,约为34%.      

航空发动机燃烧室出口高温热电偶校准技术

在高温校准风洞上,对测量航空发动机燃烧室出口温度气冷式和非气冷式这两种形式的高温热电偶进行校准,确定了高温热电偶的辐射修正系数.校准实验结果表明:高温热电偶的辐射误差随气流速度和压力的增加而降低,而且气流温度与航空发动机机匣壁面温度的温差越大,辐射误差也越大.比较两种结构形式的高温热电偶,非冷却式高温热电偶的测量误差比气冷式高温热电偶的相对较小.      

新型磁悬浮振动陀螺的设计与分析研究

振动陀螺是一种利用哥氏效应检测角速度的传感器,其谐振子的结构精度和阻尼均匀性限制了陀螺性能的提升。为减小谐振子结构与支撑锚点的影响,提出了一种全新概念的磁悬浮振动陀螺。该陀螺利用电磁悬浮的方法将谐振子悬空,从而简化了谐振子为无支撑锚点的集中质量块,降低了其结构精度要求,消除了机械结构阻尼,最终达到提升陀螺性能的目的。基于经典振动陀螺模型,理论分析了磁悬浮振动陀螺的基本工作原理,并说明了谐振子误差对陀螺性能的影响规律,设计了新型磁悬浮振动陀螺的结构,并对该结构的磁感应强度进行了仿真分析。仿真结果证明,悬浮质量块振动稳定,具有较好的磁场均匀性。最后对陀螺样机进行了测试,其固有频率为20Hz,标度因子约为1.6mV/[(°)/s],测试结果验证了所提磁悬浮振动结构的陀螺效应。