基于断口分析的钛合金轮内部缺陷损伤容限

为进行某轮损伤容限设计,开展了裂纹扩展断口分析和仿真分析研究。由断口分析可知:疲劳源为一处内部自然缺陷;依据疲劳辉纹确定了裂纹扩展速率;在裂纹长度为2 mm附近,裂纹扩展速率明显增大,为第一、第二加载阶段转换区域;裂纹稳定扩展区裂纹长度与裂纹扩展速率呈双对数线性关系;应用列表梯度法和Paris公式法反推了第二加载阶段的疲劳寿命,与该阶段实际循环次数的最大误差是163%。裂纹稳定扩展阶段裂纹扩展仿真值与断口反推值吻合;非稳定扩展阶段仿真值与断口反推值的最大误差为-215%;基于以上研究,合理确定了某离心轮内部裂纹表面扩展停机检测周期。该类轮非稳定、失稳扩展阶段寿命占内部裂纹表面扩展阶段寿命的比例达248%~357%,因此准确计算具有重要意义。     

0.3 m低温风洞液氮供给系统研制

基于系统级的一维热流体模拟分析,建立了适用于研究分析0.3 m低温风洞液氮供给系统的数学模型,并开展了系统漏热、两相流及缓冲罐中液氮容积等流体动力学分析;在系统现有控制策略及试验数据的基础上,基于该数学模型开展了系统压力动态响应分析,获得了在阀门动态调节过程中管网压力的瞬态响应,计算结果与试验值的总体误差控制在10%以内。喷射压力一致化改造避免了阀间干扰,添加的回流管道消除了供给末端的两相流现象,使喷射压力控制精度达到1.1%,调节时间减少到23 s,实现了风洞总温快速安全调节和精确控制。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

Sensitivity analysis of flowfield modeling parameters upon the flow structure and aerodynamics of an opposing jet over a hypersonic blunt body

Implementation of an opposing jet in design of a hypersonic blunt body significantly modifies the external flowfield and yields a considerable reduction in the aerodynamic drag. This study aims to investigate the effects of flowfield modeling parameters of injection and freestream on the flow structure and aerodynamics of a blunt body with an opposing jet in hypersonic flow. Reynolds-Averaged Navier-Stokes (RANS) equations with a Shear Stress Transport (SST) turbulence model are employed to simulate the intricate jet flow interaction. Through utilizing a Non-Intrusive Polynomial Chaos (NIPC) method to construct surrogates, a functional relation is established between input modeling parameters and output flowfield and aerodynamic quantities in concern. Sobol indices in sensitivity analysis are introduced to represent the relative contribution of each parameter. It is found that variations in modeling parameters produce large variations in the flow structure and aerodynamics. The jet-to-freestream total-pressure ratio, jet Mach number, and freestream Mach number are the major contributors to variation in surface pressure, demonstrating an evident location-dependent behavior. The penetration length of injection, reattachment angle of the shear layer, and aerodynamic drag are also most sensitive to the three crucial parameters above. In comparison, the contributions of freestream temperature, freestream density, and jet total temperature are nearly negligible.     

无人机系统的安全性与危险源分析

无人机系统的战术性能及优势将使其在未来高技术战争和民用航空中发挥越来越重要的作用。然 而,由于有人机与无人机飞行事故的特点不同,使得有人机的安全性分析与管理措施不完全适用于无人机系 统。首先,对无人机系统的飞行事故进行统计分析,得出无人机系统事故的特点;然后,合理借鉴有人机的安全 性分析,定义无人机系统的安全性,提出无人机系统事故的严酷度等级划分及相应的危险可接受度;最后,从设 计、机组训练及使用操作三方面进行危险源分析。本文提出的无人机系统不安全事件发生可能性等级划分和 危险源定性分析,可为后续无人机安全管理框架的构建奠定基础。     

基于过渡工作过程的航空发动机气路分析方法

为对发动机机动性能的退化程度进行估计,开展了基于过渡工作过程的气路分析研究。针对气路传感器数目较少的情况,采用序列工作点方法对大量的健康参数进行分析,在增加可用信息量的同时,降低了由多工作点方法的平均效应引入的参数估计系统误差。为解决发动机大偏差性能退化健康参数估计中的计算收敛性问题,提出了间接递归牛顿-拉夫逊法强化非支配分类差分进化算法。针对某型双轴分排涡扇发动机的气路分析结果表明：采用本文所提出的方法能够在气路传感器数目有限的条件下,利用发动机过渡态数据实现对大偏差范围内大量健康参数的高效、准确估计。     

基于飞行签派员的航空公司运行效率提升研究

航空公司运行控制中心是航空公司的核心,而飞行签派员又是运行控制中心的核心,运行控制中心的 效率直接影响到航空公司的运行安全与效益。根据航空公司飞行签派员的特点和管理现状,对效率量化和效 率评估进行分析研究,采用改进层次分析法(AHP)和物元可拓模型相结合的方法,建立适合我国航空公司飞 行签派员运行效率评估模型;针对评价指标在实际情况下更具有针对性和可操作性,提出4项准则和16项指 标组成的基于签派员航空公司运行效率评价指标体系,并进行算例分析。结果表明:所构建的评价指标体系合 理有效,能够真实反映出航空公司的运行效率与飞行签派员、运控设备、AOC组织结构与工作环境和航空公司 管理规定有着密切联系,为公司运行效率的提升提出理论依据。     

树脂基导电纳米复合材料电磁屏蔽性能的研究进展

随着5G时代的来临,电磁污染问题日益严重。电磁屏蔽是解决电磁污染的有效方法,已成为人们关注的热点。导电纳米粒子具有优异的导电性及其独特物理特性,其树脂基复合材料可作为轻质高电磁屏蔽效能的电磁屏蔽材料。本文主要介绍了含有导电一维纳米粒子（碳纳米管、银纳米线）和二维纳米粒子（石墨烯、MXenes）的树脂基复合材料在电磁屏蔽性能方面的研究进展,进一步对其发展趋势进行了展望。     

电磁测力系统研究

介绍了电磁测力系统中静磁场分析与优化、通电线圈位置控制方法及提高线性度的自校准方法。运用Maxwell 3D进行仿真计算,得到了相对优化的磁密及磁均匀性,通过控制通电线圈在磁场中位置及分段线性微分技术,提高了电磁测力准确度。构建了试验装置,对比试验数据表明,该研究措施对于提高电磁测力准确度取得了较好效果。     

吸气式电推进系统可行条件分析

吸气式电推进系统作为有可能实现长寿命超低轨飞行的技术而被关注。根据不同轨道环境条件,采用管状结构进气道、以及机械增压的吸气方式,讨论了吸气式电推进系统所需的可行条件。分析表明,在轨高度180~240km,航天器所需总功耗与迎风面之比需要大于2kW/m2,电推力器比冲需大于4×104m/s,方可满足推阻平衡需求。分析得出,实现吸气式系统在地球轨道的运用,关键技术在于增加气体收集效率并且降低收集功耗,同时电推力器的效率还需进一步提升。