Multi-objective optimization of different dome reinforcement methods for composite cases

A multi-objective optimization method was proposed for different dome reinforcement methods of a filament-wound solid rocket motor composite case based on a Radial Basis Function (RBF) model. Progressive damage of the composite case was considered in a simulation based on Hashin failure criteria, and simulation results were validated by hydraulic burst tests to precisely predict the failure mode, failure position, and burst pressure. An RBF surrogate model was established and evaluated by Relative Average Absolute Error (RAAE), Relative Maximum Absolute Error (RMAE), Root Mean Squared Error (RMSE), and R² methods to improve the optimization efficient of dome reinforcement. In addition, the Non-dominated Sorting Genetic Algorithm (NSGA-II) was employed to establish multi-objective optimization models of variable-angle and variable-polar-radius dome reinforcements to investigate the coupling effect of the reinforcement angle, reinforcement layers, and reinforcement range on the case performance. Optimal reinforcement parameters were obtained and used to establish a progressive damage model of the composite case with dome reinforcement. In accordance with progressive damage analysis, the burst pressure and performance factor were obtained. Results illustrated that variable-angle dome reinforcement was the optimal reinforcement method compared with variable-polar-radius dome reinforcement as it could not only ensure the reinforcement angle’s continuous changing but also decrease the mass of composite materials. Compared with the unreinforced case, the reinforced case exhibited an increase in the burst pressure and performance factor of 36.1% and 23.5%, respectively.     

电弧增材制造7075铝合金的微观组织与力学性能

7xxx系铝合金电弧增材制造过程中因组织不均匀与元素偏析导致成形试样性能较低,针对这一问题,对电弧增材制造7075铝合金薄壁件进行固溶+人工时效热处理(T6态),对比研究了热处理前后微观组织与力学性能的变化。结果表明,7075铝合金沉积态试样中晶粒被网状共晶组织包围,Zn、Mg和Cu元素在晶界富集,产生元素偏析。经过T6态热处理后,大部分共晶组织溶解,元素分布的不均匀性得到明显改善。与沉积态试样相比,热处理后试样的抗拉强度与断后伸长率增加,抗拉强度从(279.4±5.3)MPa提高至(493.9±10.2)MPa,断后伸长率从3.78%±0.35%增加到9.66%±1.70%。T6态试样的拉伸断口表面密布着韧窝,断裂方式为韧性断裂。     

Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition

 Laser melting deposition was carried out to deposit a 1Cr12Ni2WMoVNb steel bar on a wrought bar of same material. Room-temperature tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample were evaluated, and microstructure, fracture surface morphology, and hardness profile were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and a hardness tester. Results show that the hybrid fabricated 1Cr12Ni2WMoVNb steel sample consists of laser deposited zone, wrought substrate zone, and heat affected zone (HAZ) of the wrought substrate. The laser deposited zone has coarse columnar prior austenite grains and fine well-aligned dendritic structure, while the HAZ of the wrought substrate has equiaxed prior austenite grains which are notably finer than those in the wrought substrate zone. Besides, austenitic transformation mechanism of the HAZ of the wrought substrate is different from that of the laser deposited zone during the reheating period of the laser deposition, which determines the different prior austenite grain morphologies of the two zones. Microhardness values of both the laser deposited zone and the HAZ of the wrought substrate are higher than that of the wrought substrate zone. Tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample are comparable to those of the wrought bar, and fracture occurs in the wrought substrate zone during the tensile test.     

Nb-Si 基超高温合金的研究进展

Nb-Si基超高温合金由于熔点高、密度低和优良的高温强度等特点受到广泛关注,极具作为下一代高推重比航空发动机和超然冲压发动机的热端部件用材料的潜力.本文主要介绍了国内外在合金化、粉末冶金、定向凝固和热处理工艺对Nb-Si基合金组织和性能影响等方面的研究现状,并展望了其发展趋势.     

Electron Beam-Physical Vapor Deposited TiAl-based Laminated Composite Sheet with Nb Layer Toughening

The TiAl-based laminated composite sheet of 150mm×100 mm×0.2mm, with 24 TiAl layers and 23 Nb layers laid alternately one on another, was successfully fabricated using the electron beam-physical vapor deposition (EB-PVD) method. The microstructure and properties of the sheet were investigated on an atomic force microscope (AFM), a scanning electron microscope (SEM) and a tensile testing machine. The results indicate that the evenly distributed Nb layers are well joined with the TiAl layers, and the interfaces between layers are transparent, and every interlayer spacing is of about 8 μm. The fractures appear to be a mixture of intergranular fractures and somewhat ductile quasi-cleavage ones. Despite its slight influence on ultimate tensile strength, the inserts of Nb layers efficiently in-crease the room temperature ductility of TiAl-based alloys due to the crack deflection effect.     

矩阵初等变换的一些性质及应用

矩阵的初等变换是线性代数中应用十分广泛的重要工具。文章证明了矩阵初等变换的两个性质 ,以此为基础 ,归纳说明了矩阵的初等变换在线性代数课程中的应用 ,并给出了一些实例。     

应用TESTWORK3.02软件测试不锈钢带的力学性能

介绍了用ＴＥＳＴＷＯＲＫ３．０２测试软件对不锈钢带力学性能的测试过程。从而获得了不锈钢带的弹性模量、抗拉强度、非比例伸长应力、断后伸长率等指标。     

Sb对AE41镁合金组织和性能的影响

研究了Sb元素对AE41(Mg-4A l-1RE)镁合金组织和性能的影响。结果表明,加入Sb后基体中出现了弥散颗粒质点。该颗粒质点相主要为RE2Sb相,但当含Sb量较高时,该颗粒质点主要为RE2Sb相和RESb相的复合物。随着Sb加入量的增加,枝条状A l11RE3相在数量降低的同时在形态上逐渐变短变细,弥散RE-Sb颗粒质点数量和尺寸增大,晶界处零星散布离异共晶β相的数量也提高。加入Sb改善了合金的流动性。合金的拉伸强度、塑性、硬度和冲击韧性随着含Sb量的增加而提高,但Sb含量过大时合金的综合力学性能下降。     

石墨烯增强铝基纳米复合材料研究进展

石墨烯以其优异力学、物理性能以及独特二维结构成为铝基复合材料的理想纳米增强相.金属基纳米复合材料制备技术快速发展,促进了石墨烯增强铝基纳米复合材料在结构和功能材料领域中的广泛研究.石墨烯在铝基体中的分散以及石墨烯/铝的界面控制问题具有重要科学研究和工程应用价值.重点介绍石墨烯增强铝基纳米复合材料最新研究进展,主要包括石墨烯增强铝基纳米复合材料的分散和冶金成型技术及其结构表征和力学性能研究.实验表明石墨烯能够显著提高铝基体力学性能,但作者认为通过优化工艺参数、改善微观结构和控制结合界面能够进一步优化材料性能.此外,为实现工程应用,还需加强石墨烯增强铝基复合材料的腐蚀性能和热、电性等物理性能研究,并突破材料的低成本、大规模制备技术.本文还基于石墨烯独特二维结构和表面状态,对石墨烯的增强增韧机制进行了深入讨论.     

PBO-C/ E 复合材料的界面及压力容器性能

研究了PBO纤维与T700碳纤维混杂复合材料的界面性能和压力容器性能。采用层间剪切强度测试和吸水率测试研究了不同混杂比对混杂复合材料界面粘接性能和吸水性能的影响。研制了PBO纤维与T700碳纤维混杂复合材料Ф150 mm压力容器,对容器的水压爆破性能和轴压承载性能进行了测试。结果表明:混杂复合材料的层间剪切强度随着混杂比增大逐渐升高,当T700碳纤维含量较低时,混杂复合材料界面粘接性能提高并不明显;混杂复合材料的吸水率介于PBO纤维和T700碳纤维复合材料之间,近似符合"混合定律",界面数对混杂复合材料吸水性影响较大;混杂复合材料Ф150 mm容器的PV/W随着混杂比增大逐渐降低,混杂工艺能够使PBO纤维复合材料容器的轴压承载性能提高31%。