凹槽对涡轮叶片前缘换热特性影响的实验研究

为了探究带有凹槽造型的涡轮叶片前缘结构的换热特性,采用瞬态热色液晶技术研究了凹槽对涡轮叶片前缘外表面换热系数的影响,获得了不同主流雷诺数以及湍流度下涡轮叶片原始前缘结构及带两种不同深度凹槽的前缘结构外表面的换热系数分布数据,并采用努塞尔数评估对比了三种结构下的换热特性。实验结果表明：原始前缘结构存在高换热系数区,随着湍流度的增大,高换热核心区显著增大;由于凹槽对滞止区域的流动产生了影响,带凹槽的前缘结构在不同工况下均表现出将原始结构高换热核心区分割为凹槽两侧突出边缘的高换热区和槽内低换热区的分布特征;凹槽可以显著降低前缘表面的换热强度,带浅凹槽的前缘结构在前缘表面的面平均努塞尔数相比原始前缘结构降低约7.9%~14.5%,带深凹槽的前缘结构相比原始前缘结构降低约9.1%~20.9%;与Reg=200,000相比,当Reg=150,000时,带凹槽的前缘结构相比原始结构的低换热优势更强。     

Planetary protection issues related to human missions to Mars

In accordance with the United Nations Outer Space Treaties [United Nations, Agreement Governing the Activities of States on the Moon and Other Celestial Bodies, UN doc A/RES/34/68, resolution 38/68 of December 1979], currently maintained and promulgated by the Committee on Space Research [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], missions exploring the Solar system must meet planetary protection requirements. Planetary protection aims to protect celestial bodies from terrestrial contamination and to protect the Earth environment from potential biological contamination carried by returned samples or space systems that have been in contact with an extraterrestrial environment. From an exobiology perspective, Mars is one of the major targets, and several missions are currently in operation, in transit, or scheduled for its exploration. Some of them include payloads dedicated to the detection of life or traces of life. The next step, over the coming years, will be to return samples from Mars to Earth, with a view to increasing our knowledge in preparation for the first manned mission that is likely to take place within the next few decades. Robotic missions to Mars shall meet planetary protection specifications, currently well documented, and planetary protection programs are implemented in a very reliable manner given that experience in the field spans some 40 years. With regards to sample return missions, a set of stringent requirements has been approved by COSPAR [COSPAR Planetary Protection Panel, Planetary Protection Policy accepted by the COSPAR Council and Bureau, 20 October 2002, amended 24 March 2005, http://www.cosparhq.org/scistr/PPPolicy.htm], and technical challenges must now be overcome in order to preserve the Earth’s biosphere from any eventual contamination risk. In addition to the human dimension of the mission, sending astronauts to Mars will entail meeting all these constraints. Astronauts present huge sources of contamination for Mars and are also potential carriers of biohazardous material on their return to Earth. If they were to have the misfortune of being contaminated, they themselves would become a biohazard, and, as a consequence, in addition to the technical constraints, human and ethical considerations must also be taken into account.     

Very low frequency interferometry for the Chang’E-2 project

Very low frequency interferometry among two astronomical experiments has been proposed and accepted for further study for the second phase of China’s lunar exploration programme (the Chang’E Programme), which is envisaged to operate a lander and a rover on the surface of the moon. This experiment is an interferometer experiment in the very low frequency (VLF, f < 15 MHz) regime of radio frequencies with at least degree-level angular resolution. The goals include observing solar storm activities, Coronal Mass Ejections, Auroral Kilometric Radiation, and planetary radiation in the solar system, studying the origin of Cosmic Rays, spectral properties of pulsars, surveying ionized hydrogen in the Galaxy, and exploring coherent radio emissions.     

带集中热源的散热器温度场的数值分析

随着大规模集成电路的发展,电子设备的封装体积越来越小,功率却越来越大,这就使电子设备的温度日益增高,而电子设备的可靠性又与温度密切相关,良好的散热是电子设备应用中重要的一环.本文以通用的矩形翅片式散热器来对比带集中热源和带平均热源的散热器的温度差异,提出以嵌入热管的方法来解决带集中热源散热器的散热难题,并运用IcEPEK软件对其可行性进行了验证.     

多孔层板换热特性实验研究

本实验选取了一种典型结构的多孔层板作为研究对象 ,进行了换热特性实验研究。研究了改变冷热气流吹风比对该型层板冷却效果的影响。另外 ,对该型多孔层板的冷却效果沿中轴线顺气流方向的变化规律也作了深入的研究。并给出了层板局部 N ux 和冷却效果 E关于局部 Rex 及冷热气流吹风比 M的数学拟合表达式。     

浮升力对双旋转轴间流动换热影响的数值模拟

利用Boussinesq假设，采用混合长度模型，对具有轴向通流的双旋转轴间的流动换热进行了数值研究，得到了轴间气体充分发展段的速度分布、温度分布和加热边的对流换热系数，其结果在实验模型参数范围内与PfitzerH的实验研究符合较好。在此基础上，进一步数值模拟研究了同向等速旋转双轴间不可压流的离心浮升力对流动换热的影响，结果表明：离心浮升力对流动换热的影响取决于浮升力与惯性力之比GrB/Rex^2。当GrB/Rex^2≥24时，浮升力的影响十分显著，不可忽略。     

惯性导航系统各种传递对准方法讨论

 本文按对准基本原理将惯性导航系统各种传递对准方法分为两大类,一类可称为计算参数匹配法,它包括速度匹配和位置匹配;另一类可称为测量参数匹配法,它包括加速度匹配、姿态匹配和角速度匹配。文中详细讨论了这两类方法的性质,指出:计算参数匹配法类似静基座自对准和空间率对准,在载体无机动动作时对准时间较长。测量参数匹配法对准时间短,但受载体挠性变形的影响大。     

高超音速湍流分离激波结构不稳定性的实验研究

用铂膜电阻温度计测量了前向台阶诱导激波与湍流边界层相互作用流场中的表面热流率脉动。试验条件是:自由流马赫数为7.8,单位长度雷诺数为3.5×10~7米~(-1)。给出相互作用区平均热流率和脉动热流率分布。结果表明:在激波诱导的高超音速湍流分离流中,激波结构是不稳定的,产生一个间歇区域。在间歇区中,表面平均热流率由未扰动湍流边界层的热流信号和低频高幅热流脉动迭加而成,出现一个极大值。相互作用愈强,愈大,间歇区域愈长。     

管内振荡流体换热研究

 本文简要总结了管内振荡流体强化换热的重要成果。对分析解,数值结果和量纲分析进行了归纳并与实验数据进行了比较。同时,讨论了强化换热的机理,认为有效导热面积和温度梯度的增加是强化换热的主要原因。这种强化传热技术在宇航工程和电子工程领域有其广阔的远大前景     

失谐周期压电复合材料结构中的波动局部化研究

考虑力电耦合效应的影响,研究了层状失谐周期压电复合材料结构中的波动局部化问题。根据界面上力电连续条件,推导了结构中相邻单胞间的传递矩阵。以力场和电场变量为状态向量,给出了结构中局部化因子的表达式。作为算例,计算了结构中的波动局部化因子。计算结果表明,压电陶瓷的压电效应对周期压电复合材料的波动局部化特性有显著影响,压电常数越大局部化因子值越大,结构的局部化程度越强;结构的失谐度越大,频率通带区间内的局部化因子值越大,局部化程度越强。分析结果对于周期压电复合材料结构的优化设计和振动控制具有理论参考价值。