地球同步轨道长寿命卫星热控涂层太阳吸收率性能退化研究

文章介绍了15年地球同步轨道环境对卫星表面太阳吸收率性能影响的试验模拟研究,研究结果为长寿命卫星热设计及热控涂层选择和研制提供可靠依据;介绍自行研制的空间低能综合环境试验设备、太阳吸收率原位测试系统和空间低能综合环境模拟试验方法,并对航天器常用的S781白漆、SR107ZK白漆、F46镀银和OSR二次表面镜热控材料进行空间低能综合环境模拟试验,获得了这些热控涂层在地球同步轨道15年期间太阳吸收率性能退化模拟数据,与已有的飞行试验数据进行对比研究,取得满意的结果。     

大型太阳模拟器拼接准直镜技术

KM6太阳模拟器采用离轴准直光学系统,离轴角为29°,准直角≤±2°,准直镜最大外形直径为6800mm。根据太阳模拟器光学系统的特性,同时也为降低制造成本,准直镜可以采用球面反射镜来代替原本的抛物面反射镜,并且采用多个小镜拼接而成。文章从外形尺寸计算、单元准直镜及其调节机构、框架结构及其调节机构、准直镜的温控和准直镜的装调等方面全面介绍了KM6太阳模拟器拼接准直镜的设计技术。与此同时,详细阐述了在平面结构基础上拼接大型球面反射镜的可行性及其相关位置尺寸的计算方法,阐述了单元准直镜和框架的调节机构的原理及其拼接球面反射镜过程中的作用,论述了准直镜辐射制冷、电加热调温的温控方案的可行性,进行了必要的热分析计算,对空间环境模拟器中大型反射镜的研制具有参考价值。     

Single event upset investigations on the “Flying Laptop” satellite mission

The radiation effects in electronic parts are called single-event effects, which are deemed to be critical for space missions. This paper presents the Single Event Upsets that were observed in an onboard memory device of the Low Earth Orbit “Flying Laptop” satellite mission during its in-orbit operation. The Single Event Upsets were carefully mapped on the satellite orbital space itself and their root causes were investigated together with their rates of occurrence. Subsequently, the events were traced to show several root cause sources such as (i) trapped energetic protons leaking to low altitudes within the South Atlantic Anomaly, (ii) Solar Energetic Particles emitted by an impulsive event on 10 September 2017, and (iii) Galactic Cosmic Rays. A profound analysis was carried out on the observed flight data, and its corresponding results are actually in agreement with the standard energetic particle models. The presented results provide another important insight on the Single Event Upsets for future Low Earth Orbit satellite missions.     

Shape optimization of a three-dimensional membrane-structured solar sail using an angular momentum unloading strategy

A shape of the satellite’s solar sail membrane is essential for unloading angular momentum in the three-axis stabilized attitude control system because the three-dimensional solar sail can receive solar radiation pressure from arbitrary directions. In this paper, the objective is the shape optimization of a three-dimensional membrane-structured solar sail using the angular momentum unloading strategy. We modelled and simulated the solar radiation pressure torque, for unloading angular momentum. Using the simulation system, since the unloading angular momentum rate is maximized, the shape of the three-dimensional solar sail was optimized using a Genetic algorithm and Sequential Quadratic Programming. The unloading velocity in the optimized shaped solar sail was greatly improved with respect to a conventional flat or pyramid solar sail.     

主被动雷达复合制导中的主动通道最优辐射时机

反舰导弹复合导引头的主动通道在辐射时机取值上存在一个矛盾--过早辐射会增大过早暴露自身的风险,过晚辐射则有可能出现目标脱离视野范围或在最大过载情况下仍无法命中目标的问题。针对导弹仅在末制导阶段开启辐射的情况,提出了一种主动通道最晚辐射时机的求解方法,既保证了一定的命中概率,又降低了被敌方侦察截获的风险。     

大气对遥感卫星图像品质的影响分析

影响遥感卫星图像品质的因素很多,其中包括成像条件中的大气辐射.文章根据遥感成像理论分析了大气辐射对遥感卫星图像品质的影响,计算了大气背景及大气对图像层次和图像对比度的影响.最后,结合遥感相机的特点,给出了减少大气影响、提高图像品质的建议.     

孔隙分布对陶瓷材料热辐射特性的影响

通过引入吸收性介质内粒子散射Mie理论,结合多弥散粒子系独立散射理论,针对孔隙具有修正Gamma分布规律的多孔陶瓷提出一种计算热辐射特性的方法,以氧化锆陶瓷为例分析了孔隙分布对热辐射特性的影响.结果表明孔隙分布规律和平均孔径对热辐射特性有显著影响.孔径趋于单弥散分布,将使衰减系数、散射反照率、非对称因子等参数减小,而孔...     

空间目标红外辐射特性分析

研究空间目标的红外辐射特性,对于探测识别空间目标、监视空间碎片、保障卫星运行安全等问题有重要意义.本文以空间卫星为目标,分析了其红外辐射特性形成的原理,依据空间目标的热平衡方程,应用节点网络法求解目标表面的温度分布,并结合普朗克定律推导空间目标红外辐射度的计算方法,在分析总结相关资料的基础上得到了求解空间目标红外辐射特...     

ESA再入探测器的某些空气热动力问题

给出了两种不同的再入飞行器:充气的再入和下滑演示器(IRDT)和Huygens.两者的任务都涉及在靠近轨道的条件下再入并均已于2005年完成.概述了IRDT的使命和具体设计问题,综述了IRDT最近飞行的初步结果和ESTEC估计Huygens受到的辐射通量采用的方法.