航天器环境干扰力矩的闭环辨识与补偿

研究引入干扰力矩辨识的方法提高三轴稳定航天器在稳态运行期间的高精度指向控制问题.基于航天器的稳态输出数据和系统传递函数,对环境干扰力矩的完整模型进行闭环辨识.其中采用改进的特征系统实现相关算法和多元线性回归法辨识环境干扰力矩的模型参数,最后使用前馈控制对所辨识的环境干扰力矩实现在线补偿.分析和仿真结果表明,该方案能有效地克服不确定的环境干扰力矩对姿态稳定度的影响,提高在轨运行航天器的姿态稳定精度.     

1,5-二氨基四唑含能配合物的制备、表征及其催化性能研究

合成出2种以1,5-二氨基四唑(DAT)为配体,苦味酸根为外界,钴和铜为中心离子的含能配合物,并对其结构进行了表征.运用示差扫描热分析(DSC)方法,就目标化合物对高氯酸铵(AP)、奥克托金(HMX)和六硝基六氮杂异伍兹烷(HNIW)热分解的影响进行了研究.利用电荷耦合器件(CCD)燃速测定系统,研究了目标化合物对缩水...     

储氢合金的性质及发展趋势

本文介绍了储氢合金的性质，Ｎｉ－ＭＨ电池原理，以及储氢合金对Ｎｉ－ＭＨ电池所产生的影响，根据目前科学技术的发展以及市场的需求，提出了未来储氢合金及Ｎｉ－ＭＨ电池的发展趋势。     

Corrosion Inhibition of SiC_p/5A06 Aluminum Metal Matrix Composite by Cerium Conversion Treatment

This article studies the effects of the CeCl₃ concentrations in conversion solutions with and without addition of NaCl, pH-values of conversion solution, drying temperature, time and temperature of immersion on the Ce-conversion coatings for corrosion protection of the SiC_p/5A06 Al-MMC and 5A06 Al-alloy in the 3.5% NaCl aqueous solution at room temperature. Potentiodynamic polarization tests reveal that the Ce-conversion treatment could markedly improve the pitting corrosion resistance of the composite and the matrix alloy in chloride containing environment. The best corrosion resistance effects are obtained for the samples treatment in 1‰ CeCl₃·7H₂O/ 3.5% NaCl solution at 45 °C for 60 min, followed by drying at 100 °C for 30 min. Examinations by means of scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) indicate that this behavior is due to the precipitation of Ce-oxides/hydroxides on the cathodic intermetallics and the Al-oxide film on the rest of the metal matrix.     

2. 5D 衍生结构SiO2 f / SiO2 复合材料的经向力学性能

以几种不同的2.5D衍生结构织物为增强体,制备了法向增强、经向增强及经法向增强2.5D Si O2f/Si O2复合材料,比较了上述材料与现有2.5D Si O2f/Si O2复合材料的经向力学性能,并研究了经法向增强2.5D结构复合材料中增强纱比例、纤维体积分数与材料性能之间的关系,对织物结构进行了优化。结果表明,经法向增强2.5D Si O2f/Si O2复合材料的经向力学性能较现有2.5D复合材料有显著提高,该材料在较低密度下(1.6 g/cm3),经向拉伸强度与现有材料(1.65 g/cm3)持平,且经向压缩强度接近现有材料的4.3倍。     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

一种基于星载GPS的月球探测器导航算法

为验证GNSS旁瓣信号对中高轨航天器在轨飞行的导航支持能力,"嫦娥5号"飞行试验器搭载了GPS导航接收机。由于目前使用的星载导航解平稳性不够,为此,根据月球探测器不同飞行段落轨道动力学特性,建立了一种基于星载GPS数据的月球探测器实时导航算法。该算法充分考虑了月球探测器不同段落的动力学特性,基于UKF滤波设计,并引入了自适应策略,以降低滤波参数选取的难度。在分析星载GPS数据特点基础上,月地返回段实测数据的处理结果验证了算法的可行性和有效性。     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

面向绕月交会对接的同波束VLBI研究

针对"嫦娥5号"(CE-5)探测器间高精度相对测量需求,设计了我国深空干涉测量处理中心框架下的同波束VLBI处理算法,分析了X波段同波束VLBI相位解模糊条件和结果;通过引入群时延辅助的相位干涉技术,大幅抑制了干涉时延随机误差,为同波束VLBI中相位解模糊提供了先验条件;利用CE-5对接实测数据验证了本文工作的有效性,为CE-5任务同波束VLBI的实施奠定了基础。     

基于C#技术的MD5加密算法的应用

在对Message-Digest Algorithm 5进行简要描述的同时,对MD5算法的原理作深入分析.运用MD5算法,采用目前流行的C#语言进行了具体研究,设计了MD5加密演示系统,经过测试该系统可以准确实现数据的MD5加密.