货物舱内移动过程的建模与仿真(英文)

研究了运输机重型货物舱内移动飞行过程的控制建模问题。通过建立坐标系,利用牛顿第二定律和空间刚体的欧拉角关系,推导货物舱内移动飞行过程中质心运动动力学方程和绕质心运动动力学方程,分析舱内移动过程对运输机飞行的影响,最后对所建立的飞行控制模型进行系统仿真。     

Design of Flight Control System for a Small Unmanned Tilt Rotor Aircraft

A tilt rotor is an aircraft of a special kind, which possesses the characteristics of a helicopter and a fixed-wing airplane. However, there are a great number of important technical problems waiting for settlements. Of them, the flight control system might be a critical one. This article presents the progresses of the research work on the design of flight control system at Nanjing University of Aeronautics and Astronautics (NUAA). The flight control law of the tilt rotor aircraft is designed with the help of an inner/outer loop control structure and an eigenstructure assignment algorithm on the basis of a proper mathematical model already verified by the wind tunnel tests. The proposed control law has been born out through the construction of the flight control system and the flight tests. Now, the flight tests are still underway on a prototype of small unmanned tilt rotor aircraft. The results have evidenced the credibility of the aircraft design and the effectiveness of the flight control system for the tilt rotor working in the helicopter mode. A full envelope flight test is planned to carry out further researches on the flight control law.     

基本作战单元修复性维修过程建模仿真

为分析评价基本作战单元修复性维修保障方案,准确计算故障修复时间,根据 系统工程建模思想,建立了基本作战单元站点间、站点内修复性维 修过程仿真模型,对其修复性维修活动进行了详细描述,提出了累积维修比、维修模式比和 拆卸率因子参数,为基本作战单元修复性维修过程的定量分析提供了度量方法,并根据 Monte Carlo仿真原理给出仿真算法,为型号工作人员进行保障性设计分析提供了理论方法和技 术手段,最后以某型飞机组成的基本作战单元为例,对其修复性维修保障方案进行仿真试验 验证,分析了修复性维修过程的改进对保障资源和维修时间的影响.      

双系缆气球绳网系统的建模、配平及稳定性

为研究一种双系缆气球绳网系统的气球、绳网的设计问题和系统抗风能力的评估问题,建立了考虑风影响的双系缆气球绳网系统的数学模型,其中包括在体轴系下建立的气球的数学模型、根据无限细化理论建立的系缆的数学模型和按照一定的简化假设建立的绳网的数学模型;在配平状态下引入小扰动假设,使非线性方程组线化,并分析了该系统对阶跃风扰动的响应和稳定性.仿真计算结果表明该系统的设计合理并具有一定的抗风能力.      

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

一种新型沃尔什函数发生器

采用Ｔ触发器建立了一个新型沃尔什函数发生器的软硬件统一模型，并对设计时所需要的多路激励信号作了较深入的分析，归纳并证明了它们的两个重要特性－反对称特性和递推特性，实验证明，按照统一模型设计沃尔什函数发生器，可以使设计过程大为筒化，而且输出的沃尔直函数具有最小正交误差。     

低热层臭氧含量振荡和温度起伏间的耦合关系

本文求出了声重波传播过程中,低热层臭氧含量振荡和温度场起伏间的耦合关系。首次揭示出其正负相关性的内在原因和判据——动力扰动尺度。在中小尺度声重波扰动范围内,臭氧含量振荡与温度场起伏是正相关的,且相关幅度可达或超过7;而在大尺度或行星尺度波范围内,则一般为负相关。此发现可解释低热层中臭氧含量快速变化及臭氧含量长时间纬圈平均值变化与温度场成负相关的观测事实。本文还在声重波尺度范围内比较了线性和非线性理论的结果,结果表明两者没有太大的差异。     

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

Aluminum alloy 5083 (AA5083) processed by large-scale Equal-channel angular pressing (ECAP) is an excellent engineering material with great prospects for industrial applications. An accurate assessment of the underlying constitutive relationships with easily determined material constants is critical for the predictive design and informed processing of such structural materials. To develop such a design framework, uniaxial dynamic compressive tests over a wide range of temperatures (293–573 K) were carried out for an ECAP-processed AA5083 alloy. Additionally, the microstructure before and after dynamic loading was characterized by SEM and TEM. Based on the experimental results, a new dynamic constitutive model, based on thermal activation theory, was established to describe the plastic flow behavior of the AA5083 alloy that incorporates the effects of plastic strain, temperature, and strain rate. The input parameters of the new model were determined using a particle swarm optimization (PSO) method. The model predictions show excellent agreement with experimental results, which suggests that the current predictive constitutive model is highly effective in reproducing the dynamic deformation behavior of the large-scale ECAP-processed AA5083.     

空间可展开天线结构研究进展

扼要综述了空间可展开天线结构的发展及目前的国际动态,叙述了空间可展开天线结构、设计及分析中的主要研究课题及其目前的进展。指出“把多体动力学与有限元法相结合的综合动力学建模法”、“辩识模型后,用预测控制和优化的思想进行展开过程控制”、“用多约束优化法调整网状天线反射面形状精度”等是适合我国目前状况的较好方法。     

有翼导弹的动态稳定性分析

导弹动态稳定性是导弹飞行动力学的重要组成部分。当导弹作高机动飞行时 ,线性理论将不再成立。本文运用非线性动力学理论 ,通过对导弹动力学方程的数值仿真 ,讨论了以导弹控制舵偏角为参数导弹高机动飞行时的非线性动态稳定性 ,并得到了相应的结论 ,为导弹控制系统的设计提供了必要的理论依据