Characterization of Cosmic Materials in the Laboratory

One of the main objectives of modern astrophysics is the characterisation of properties and evolution of materials present in space. Production, processing and analysis of cosmic dust analogues in the laboratory represents a powerful tool to interpret astronomical observations and to contribute to the solution of puzzling problems which are so far unsolved. In the present paper we summarize recent results obtained in our laboratory on carbon-based and silicate materials able to simulate various types of cosmic grains. The laboratory data are applied to discuss the nature of spectral features observed in the interstellar medium and in comets. This revised version was published online in June 2006 with corrections to the Cover Date.     

固体推进剂生产中高氯酸铵粉尘测定方法研究

研究了车间空气中高氯酸铵（AP）粉尘的测定方法。根据AP粉尘的理化特性和劳动卫生要求，确定了AP粉尘的采样点、采样位置以及采样所用的采样器，建立了重量法测定车间空气中AP粉尘浓度和滤膜溶解涂片法测定AP粉尘分散度的方法。     

Sensor calibration impacts on dust detection based on MODIS and VIIRS thermal emissive bands

Dust detection using remotely sensed measurements has been one of the challenging problems encountered by atmospheric scientists. MODerate Resolution Imaging Spectroradiometer (MODIS) on the Terra (T) and Aqua (A) platforms have been a versatile sensor for well over 21 and 18 years respectively, and have been extremely useful in the retrieval of aerosol information over the entire globe. The MODIS radiances from the Level 1B in general are expected to be within 5% accuracy in the reflective wavelengths and within 1% in the thermal emissive wavelengths. In this paper, we evaluate the sensitivity of previously developed dust detection technique based on thermal emissive wavelengths, which correspond to MODIS bands 20, 29, 31, and 32 respectively. The Thermal Emissive Dust Index (TEDI) performed very comparably to the traditional Aerosol Optical Thickness (AOT) retrievals by MODIS reflective channels. Since the MODIS Thermal Emissive Bands (TEB) are well calibrated on-orbit using a BlackBody (BB) source, the calibration of these long wave infrared bands is quite robust. As A-MODIS continues to perform well beyond its designed lifetime of 6 years, the instrument has undergone various levels of degradation during its mission time. As a consequence, it is imperative to check the impacts of calibration on the higher-level retrievals. In this paper, we rigorously analyze the sensitivity of TEDI due to the impact of calibration by the afore-mentioned TEB. The perturbation of the dominant (linear) calibration term demonstrated the following: first, there was a correlation in the sensitivity of the TEDI due to the uncertainty in the linear calibration term. Based on a perturbation in the linear calibration term for all aforementioned bands over a range of ±5% yielded the TEDI sensitivity to vary from approximately ?3.2% to about ?3.6%. When considering the uncertainty in each individual band significant changes were observed. The least change was observed for the perturbation in the calibration of band 20 with the TEDI sensitivity and the largest sensitivity in TEDI was observed in the perturbation of band 31 calibration. Thus, in the case of TEDI, noticeable sensitivity due to calibration uncertainty was observed in bands 29, 31, and 32, reiterating the importance of the TEB calibration in these bands. Also, the dust detection scheme based on A-MODIS was successfully transferred to the follow-on sensors such as Suomi (SNPP) and NOAA 20 (N20) VIIRS. The results presented in this paper would be extremely helpful in understanding impacts of calibration on the higher-level products for both current and future missions based on the MODIS heritage. Finally, the work also identifies the importance of radiometric fidelity in maintaining the accuracy of the dust detection. Results presented will show drastic improvement of the Saharan dust detection after the reduction of the electronic crosstalk in the 8.5 µm channel of T-MODIS.     

空间尘埃等离子体中尘粒电荷的相关涨落对尘埃磁声波的影响

本文运用自洽的三流体方程组, 考虑了尘埃的充电过程, 得到均匀磁化尘埃等离子体中垂直于磁场传播的尘埃磁声波的色散关系, 结合空间环境讨论了尘埃电荷的相关涨落对尘埃磁声波的影响.      

频响分析仪的校准方法

介绍了1250频响分析仪分析器的间接测量方法和直接测量方法,并对两种测量方法进行了分析、比较。指出了采用直接测量方法在测量时需要注意的问题。     

Effects of adiabaticity and non-adiabaticity of dust charge fluctuation on the propagation of the dust ion acoustic waves in inhomogeneous dusty plasma

A theoretical investigation has been made for adiabatic positive and negative dust charge fluctuations on the propagation of dust-ion acoustic waves (DIAWs) in a weakly inhomogeneous, collisionless, unmagnetized dusty plasmas consisting of cold positive ions, stationary positively and negatively charged dust particles and isothermal electrons. The reductive perturbation method is employed to reduce the basic set of fluid equations to the variable coefficients Korteweg–de Vries (KdV) equation. Either compressive or rarefactive solitons are shown to exist depending on the critical value of the ion density, which in turn, depends on the inhomogeneous distribution of the ion. The dissipative effects of non-adiabatic dust charge variation has been studied which cause generation of dust ion acoustic shock waves governed by KdV-Burger (KdVB) equation. The results of the present investigation may be applicable to some dusty plasma environments, such as dusty plasma existing in polar mesosphere region.     

Laboratory calibration measurements of a piezoelectric lead zirconate titanate cosmic dust detector at low velocities

A cosmic dust monitor for use onboard a spacecraft is currently being developed using a piezoelectric lead zirconate titanate element (PZT). Its characteristics of the PZT sensor is studied by ground-based laboratory impact experiments using hypervelocity particles supplied by a Van de Graaff accelerator. The output signals obtained from the sensor just after the impact appeared to have a waveform that was explicitly related to the particle’s impact velocity. For velocities less than ∼6 km/s, the signal showed an oscillation pattern and the amplitude was proportional to the momentum of the impacting particle. For higher velocities, the signal gradually changed to a single waveform. The rise time of this single waveform was proportional to the particle’s velocity for velocities above ∼6 km/s. The present paper reports on results for the low velocity case and especially discusses the effect of an outer coating of the sensor with a paint, which is used to reduce heating by solar radiation.     

Catalytic activity of interstellar grains: Formation of molecular hydrogen on amorphous silicates

Silicates constitute an important class of interstellar grain material and are the site of catalytic activities, most notably the formation of molecular hydrogen. Here we report an analysis of experiments conducted in the laboratory to measure the efficiency of formation of molecular hydrogen on amorphous silicates, a realistic analogue of interstellar dust grains. From the measurements, we also obtain the energetics of key processes in the reaction and information on the mechanism of reaction. Comparison with earlier measurements of molecular hydrogen formation on a sample of polycrystalline olivine shows that amorphous materials are more efficient catalysts.     

Instrument study of the Lunar Dust eXplorer (LDX) for a lunar lander mission

One of the highest-priority issues for a future human or robotic lunar exploration is the lunar dust. This problem should be studied in depth in order to develop an environment model for a future lunar exploration. A future ESA lunar lander mission requires the measurement of dust transport phenomena above the lunar surface. Here, we describe an instrument design concept to measure slow and fast moving charged lunar dust which is based on the principle of charge induction. LDX has a low mass and measures the speed and trajectory of individual dust particles with sizes below one micrometer. Furthermore, LDX has an impact ionization target to monitor the interplanetary dust background. The sensor consists of three planes of segmented grid electrodes and each electrode is connected to an individual charge sensitive amplifier. Numerical signals were computed using the Coulomb software package. The LDX sensitive area is approximately 400 cm². Our simulations reveal trajectory uncertainties of better than 2° with an absolute position accuracy of better than 2 mm.     

The nature of the luminous blue variable AG carinae

After many years of permanence at minimum, the luminous blue variable AG Car started in mid 1990 a new brightening phase. We review the spectroscopic variations of the star since 1949, and discuss the nature of the circumstellar nebula. We give evidence that, like in Car, also in AG Car dust is continuously condensing from the stellar wind. We suggest that the star could be partially reddened by the circumstellar dust, which could affect the estimates of the stellar distance. An extended HII halo is present outside the ring nebula, which should be associated with the wind of a previous cooler evolutionary stage of AG Car.