温室控制系统设计--用LCD实现控制参数设置与测量参数显示

说明了利用LCD显示模块,实现温室被测数据显示及控制参数的设定输入,其特点是显示数据的汉字名称与测量数据动态变化,系统连接线少,安装,测试,维修简单.     

网上考试系统的设计与实现

本文讨论了一种新的考试方法———网上考试 ,并讨论了一种基于B/S系统实现网上考试的思路和设计方法 ,并对实现网上考试系统的部分关键技术进行了分析     

二元外压式进气道斜板和唇口参数选择的风洞试验研究

在几何不可调的二元外压式斜板进气道的设计中，选择合理的斜板和唇口几何能数是最重要的问题之一。本文对一个设计马赫数为１．８的这类进气道的斜板和唇口参数进行了风洞试验研究。用缩尺模型风洞试验，对比分析了不同斜板角和不同外侧唇口内唇角，唇缘半径对进气道内流特性的影响，结果表明，对确定的进气道布局，斜板角小的变化对进气道超音速内流总压恢复系数，稳态出口流场周向畸变指数及喘振裕度的影响很大，唇口参数小的改变     

高速列车进入带缓冲结构隧道的压力变化研究（I）

给出了列车穿越带有缓冲结构的隧道压力变化的三维粘性流场数值模拟过程，控制方程为三维粘性、可压缩、非定常流的N．S方程，空间离散采用了中心有限体积法格式，时间采用预处理二阶精度多步后差分格式进行离散，对列车与隧道之间的相对运动采用移动网格技术处理。对不同的缓冲结构缓解隧道内瞬变压力及压力梯度的作用进行了研究。研究结果表明，缓冲结构的设置能够有效地降低隧道内的压力和压力梯度的最大值，其原因在于缓冲结构延长了压缩波压力上升的时间，降低列车突入隧道时所形成的最大压力梯度；另一方面由于压缩波在缓冲结构和列车、隧道之间多次的反射，也降低了压力峰值。     

一种新颖的瞬时浮点放大器

介绍了瞬时浮点放大器的原理及构成，并给出一种结构新的具有２５６阶的瞬时浮点放大器，可有效地提高数据采集系统的测量范围。     

典型几何和流动参数对高超声速进气道性能的影响

用N-S方程模拟了一系列典型二元高超声速进气道内压缩通道及隔离段模型,模拟发现内压缩通道及隔离段增压比、温升比和总压恢复系数等性能参数主要受面积收缩比、内压缩通道收缩角、隔离段长高比等几何参数以及内压缩通道进口马赫数、密度、附面层厚度等流动参数的影响。内收缩比和内收缩通道收缩角的增大都会使压缩增强;隔离段内沿程平均温升比、马赫数和总压恢复系数曲线则均接近平行直线。内压缩通道进口马赫数的增大也会使压缩增强,但较小的进口马赫数可能引起分离,进而增大增压比;而进口密度增大使附面层变薄,对气流的压缩减弱;进口附面层厚度对沿程平均温升比、增压比以及马赫数的影响近似线性。     

非平稳信号的双重中值容错平滑算法

平滑是消除或削弱测量数据随机误差时常用的数据处理手段。文章建立了一组新的非平稳数据序列容错平滑算法，其采用两阶段两次滑动中值与滑动均值平滑组合，实现了数据简化与平滑的统一。理论分析和仿真计算结果证实，算法可有效避免斑点型异常数据的不利影响，有效削弱随机误差的影响，改进数据处理精度和数据处理结果可靠性。     

Investigating gamma-ray burst data reduction techniques with Swift’s instruments

The amount of data on gamma-ray bursts (GRBs) and the detected afterglows observed by the Swift satellite contributed significantly to the understanding of the phenomenon. The behavior of the early afterglow rises some interesting questions. With the early afterglow localizations of gamma-ray burst positions made by Swift, the clear delimitation of the prompt phase and the afterglow is not so obvious any more. There are hints of a canonical X-ray afterglow lightcurve with segments of different slopes. Not all bursts necessarily show all the segments. It is important to see if the prompt phase and the afterglow has the same origin or they stem from different parts of the progenitor system. We will combine the of gamma-ray burst data from BAT and XRT and compare the extrapolated gamma-ray flux to the X-ray in a sample of bursts and find that there is a good agreement between the two measurements. This indicates that the physical process shaping burst and the early afterglow are the same.     

Data reduction and correction algorithm for digital real-time processing of cosmic ray measurements: NM64 monitoring at Dourbes

We present a data correction algorithm for real-time data processing for the NM64 galactic cosmic ray neutron monitor at the Royal Meteorological Institute (RMI) in Dourbes, Belgium. The correction is based on three main tests: a continuity test, tube ratios test and a derivative test. The continuity test works as a high pass filter with a threshold based on the entire recorded dataset. Additionally, it monitors whether the logging takes place at regular intervals (continuously). The ratios test identifies noisy sections and the final derivative test criterion will identify single or double spikes by testing them against the median increase of the intensities. Using these criteria, all data from the cosmic ray station at Dourbes is corrected in real time. Test results have been compared with data from verified neutron monitor stations with a similar geomagnetic cutoff rigidity.