基于随机粒子追踪方法的环形燃烧室点火动态模拟

为了深入研究低排放燃烧室点火联焰规律,在全新的环形模型燃烧室中开展了点火模拟和试验研究。点火模拟采用随机粒子追踪方法,能够基于时均冷态流场的仿真结果快速模拟火焰传播过程。环形燃烧室包含16个中心分级旋流器,仅向预燃级通入丙烷,用于模拟航空发动机低排放燃烧室点火状态下的空气燃油分级。试验采用PIV技术测量3个头部区域流场,利用高速相机拍摄火焰CH*/C2*基团化学发光信号。对多个流量和当量比条件下的联焰过程、联焰时间和传焰速率进行了分析,试验和模拟的结果均表明：环形燃烧室内火焰双向传播,燃烧室内外环流速度差异导致了双向火焰传播速度差,传焰速率随燃烧室湍流速度和当量比的增加而增加。点火模型很好地捕捉了环形燃烧室点火动态,所得传焰速率也符合湍流火焰传播规律,表明该模型具有较强预测能力。     

Are small-scale field-aligned currents and magnetosheath-like particle precipitation signatures of the same low-altitude cusp?

We examined some 75 observations from the low-altitude Earth orbiting DMSP, Ørsted and CHAMP satellites which were taken in the region of the nominal cusp. Our objective was to determine whether the actually observed cusp locations as inferred from magnetosheath-like particle precipitation (“particle cusp”) and intense small-scale magnetic field variations (“current cusp”), respectively, were identical and were consistent with the statistically expected latitude of the cusp derived from a huge number of charged particle spectrograms (“statistical cusp”).     

应用三维粒子动态分析仪测量三分支联接流场

应用三维粒子动态分析仪 (3D PDA)测得了矩形截面三分支联接的三维速度分布。在测量中 ,经过理论分析与对比试验 ,选择了蚊香烟雾作为散射粒子。实验结果表明 ,在只有支管进气的情况下 ,在总管的封闭端和支管下游总管壁面处产生了回流 ;以及气流从支管进入总管后由于截面扩张在总管横截面上所诱发的二次流 ,并且二次流现象只发生在支管下游附近的总管横截面上。     

4F傅里叶变换透镜系统对粒子场全息记录的影响

 4F傅里叶变换透镜系统在空间滤波和光学信息处理中,被广泛用来处理二维透光物体。但在实际应用中,4F系统也被用于三维场的研究。例如三维粒子场的全息记录。由于全息记录的特点,要求了解经4F系统转换后的粒子物光场,以确定粒子场的空间分布。而目前4F系统在粒子场全息记录的应用基础均借助对二维物场的研究理论。本文讨论了经4F系统转换后的三维粒子物光场的特点以及对全息记录的影响。     

固体火箭喷管排气中的粒子分布

1.前言 现代的固体火箭发动机为提高推进剂的能量特性及抑制不稳定燃烧，常常在推进剂中添加金属粉末，最常见的是加金属铝粉。在发动机工作时，铝粉燃烧形成凝聚相的氧化铝粒子。这些粒子在喷管中的流动过程中，温度、速度等方面的变化滞后于燃·气本身的变     

随机集的概率假设密度粒子滤波

多目标跟踪问题中,当目标数已知时,可以用概率数据互联(PDA)或联合概率数据互联(JPDA)算法。而当目标数未知或随时间变化时,需要对不同目标数的跟踪进行比较。可以把目标集看作随机集进行讨论,目标数N是随机变量。随机集的跟踪通过有限集统计(FISST)理论来完成。文中讨论了用粒子滤波实现跟踪随机集的方法。实验表明,在杂波环境下,粒子滤波可以稳健跟踪目标状态和目标数。     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

飞行过载对燃烧室化学反应流场影响

为了研究飞行过载对固体火箭发动机燃烧室化学反应流场影响,以Liang模型模化铝滴燃烧,以有限化学反应速率模型模化湍流燃烧,对过载条件下发动机内流场进行了数值分析,数值结果与试验结果取得了趋势上的一致。研究表明,文中采用的数值计算方法可有效重现发动机热结构故障点;飞行过载改变了流场温度、粒子浓度、化学反应速率等参数分布;过载条件下燃烧室绝热结构表面铝滴积聚及剧烈的化学放热反应是导致其异常烧蚀的原因之一,铝滴局部积聚燃烧会导致温度场畸变;热结构设计必须与流动结构匹配。     

低成本捷联惯导不对称动态误差的神经网络补偿

 针对低成本捷联惯导系统(SINS)中陀螺动态误差的不对称性在角振动条件下造成姿态漂移的问题,设计了多层前向神经网络的补偿模型。在标定模型参数时,为降低对外部参考信号测量精度的要求,提出用姿态解算的最终误差作为网络优化目标的训练方法。由于最终的姿态误差不是网络的期望输出,无法采用有导师的训练方法,为此采用了微粒群优化算法。仿真实验结果表明:补偿后的陀螺动态误差的不对称度减小了一个数量级。     

高速开关阀控电液位置伺服系统自适应鲁棒控制

为研究高精度的液压缸位置跟踪控制问题,设计了高速开关阀和换向阀组合控制液压缸的结构方案,并通过实验分析了高速开关阀的静态流量特性。建立了液压缸的连续可微摩擦模型,利用粒子群优化算法对其参数进行辨识。建立了系统的非线性数学模型,基于非连续参数映射和反步法设计了直接自适应鲁棒控制器,通过参数在线自适应调节来更新估计值和鲁棒反馈项支配参数不确定性,实验结果表明:在跟踪幅值为5mm,频率为0.4Hz的正弦信号时,最后一个周期的最大跟踪误差、平均跟踪误差及其标准差分别为0.638、0.25mm和0.405mm,与传统PID控制器相比,控制精度显著提升,旨在为实现高精度的数字阀控位置伺服技术提供有价值的参考。