Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine

Swirl-Loop Scavenging (SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences in-cylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry (PIV) experiment and Computational Fluid Dynamics (CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles α_geom and β_geom. For reinforcement of scavenging on cross-sections and meridian planes, α_geom value of 27° and β_geom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent.     

采用阵列天线的GPS接收机的多径抑制方法

提出一种新的用于阵列天线GPS接收机的多径抑制方法。考虑到通常GPS视线信号的来波方向与多径的来波方向不同,在每个导航数据符号位内测距（C/A）码重复,通过对阵列接收的信号矢量与它本身的延迟信号矢量互相关,提高接收机前端信噪比,再利用最大特征值法和前后向空间平滑技术准确地估计期望卫星视线信号（LOSS）的来波方向。最后综合多个GSC子阵列有效地降低了相关多径对码跟踪精度的影响。仿真结果显示,该方法能使接收机在与LOSS码同步前准确估计LOSS的角度信息,有效抑制相关多径,且鉴相结果准确。     

弱撞击对接机构捕获系统运动空间研究

以弱撞击对接机构（LIDM）捕获系统的运动空间为研究对象,提出了影响运动空间的主要因素如驱动臂长度、转动副转角、结构框内径等对运动空间的限制。在此基础上,对捕获系统运动空间及其各截面进行了分析,并详细讨论了结构框内径对运动空间的影响,对LIDM的设计和优化具有重要意义。     

航天器自主交会对接的高精度目标定位方法

根据航天器自主式交会对接的实际应用背景和技术需求,针对交会对接过程中所要求的高精度、实时性和强抗扰的技术指标,在合作目标特性分析的基础上,将高斯曲面拟合与双线性插值相结合,提出了一种高精度的合作目标定位方法。首先根据目标图像的灰度分布进行双线性插值和高斯曲面拟合,在此过程中可同时利用目标原有像素和插值点的亚像素信息,使拟合曲面各幅值点的坐标精度达到亚像素级,以确定目标的中心位置。仿真图像和实拍图像的试验结果表明,此定位方法具有亚像素级的定位精度,其总体定位误差可达到1/20个像素左右,并能满足实时性要求,可以在航天器交会对接与空间遥操作等方面的应用中发挥重要作用。     

深空测控通信中GMSK体制非相干解调算法研究

针对深空测控通信中GMSK体制非相干解调损失较大的难点,提出了一种改进的GMSK信号非相干维特比解调算法。通过分析相位状态网格图中相位转移规律,建立理论仿真模型。通过原理样机的研制和测试,实测数据表明：该算法具有解调损失低、实现复杂度适中的优点;相比于理论的最佳相干解调算法,在误码率1×10 -4 量级下,实测仅损失0.6 dB。目前该算法已应用于国内某深空测控通信系统GMSK体制基带设备中,并成功解调出欧空局Herschel–Planck卫星数据。     

脉冲星非实时平差的火星探测自主导航模型

针对基于X射线脉冲星观测的火星探测器自主导航,研究了几种不同的实时自适应方法,包括:扩展卡尔曼滤波(EKF),自适应扩展卡尔曼滤波(AEKF)和鲁棒自适应扩展滤波(RAEKF)。首先根据脉冲星导航原理,模拟了观测值:脉冲到达时刻;接着,分别利用扩展卡尔曼滤波,自适应扩展卡尔曼滤波和鲁棒自适应扩展滤波方法估算出探测器的位置和速度;最后,上述几种滤波轨道与STK模拟的标称轨道较差,然后比较它们的滤波精度发现:AEKF和RAEKF的精度相对较高,AEKF的三个轴向滤波位置精度达到:X轴优于100m、Y和Z轴优于30m,优于VLBI技术的km量级,和Doppler技术的精度相当。     

Solving Job-Shop Scheduling Problem Based on Improved Adaptive Particle Swarm Optimization Algorithm

An improved adaptive particle swarm optimization(IAPSO)algorithm is presented for solving the minimum makespan problem of job shop scheduling problem(JSP).Inspired by hormone modulation mechanism,an adaptive hormonal factor(HF),composed of an adaptive local hormonal factor(H l)and an adaptive global hormonal factor(H g),is devised to strengthen the information connection between particles.Using HF,each particle of the swarm can adjust its position self-adaptively to avoid premature phenomena and reach better solution.The computational results validate the effectiveness and stability of the proposed IAPSO,which can not only find optimal or close-to-optimal solutions but also obtain both better and more stability results than the existing particle swarm optimization(PSO)algorithms.     

Analysis on Potential Conflict Frequency of Intersected Air Routes in Terminal Airspace Design

In order to obtain accurate conflict risks in terminal airspace design, the concept and calculation model of potential conflict frequency for intersected routes are proposed. Conflict frequency is represented by the product of horizontal conflict frequency and vertical conflict probability. The horizontal conflict frequency is derived from the probability density distribution of conflicts in a period of time. Based on the recorded radar trajectory data, the concept and model of ROUTE distance are proposed, and the probability density function of aircraft height at a specified ROUTE distance is deduced by kernel density estimation. Furthermore, vertical conflict probability and its horizontal distribution are achieved. Examples of three intersected arrival and departure route design schemes are studied. Compared with scheme 1, the conflict frequency values of the other two improved schemes decrease to 53 % and 24%, respectively. The results show that the model can quantify potential conflict frequency of intersec ted routes.     

基于工业机器人的飞机柔性装配技术

研究了基于工业机器人的飞机柔性装配技术,着重讨论了机器人精度补偿、末端执行器设计、法线检测与找正、系统控制、离线编程等关键技术。通过在小翼部件加工中的应用,达到了孔位精度±0.5mm、法向精度±0.5°等关键技术指标。结果表明,对于特定应用对象采用机器人技术进行飞机部件自动装配为一个理想、低成本的解决方案,随着当今工业机器人性能不断增强,配以末端执行器和相关的补偿系统,在航空工业作为装配平台是可行的。