X线乳腺图像中微钙化检测的快速排除无病变区域法

介绍一种通过去除数字化乳腺x线照片中的无病变区域（TNR）间接地获取感兴趣区域（ROI）的方法。该方法可通过3个步骤来实现：（1）将图像划分为若干个不重合的相等大小块，并为每块计算5个特征；（2）通过域值法进行粗分析，排除肯定不含有病变的块；（3）使用代价敏感的支持向量分类器作更精细的分析，以进一步排除肯定不含有病变的块。在真实的数字化X线乳腺照片上的实验表明：该方法可以有效地去除高达81．71％的无病变区域。     

小波分析在钢丝绳断丝定量检测中的应用

简要介绍了小波分析的基本原理和方法。分析了钢丝绳断丝定量检测中断丝检测信号的特点，研究了小不皮分析在提取断丝特征信号及滤波中的应用。     

基于小波倒谱模型的滤波处理技术及其在超声应力检测中的应用

在超声检测中,应力是通过超声时间延迟来测量的,而超声回波的时间延迟对噪声非常敏感。噪声严重影响应力的测量精度,噪声引起的时间延迟甚至与应力引起的时间延迟处于同一量级。而以往消噪处理都是基于盲信息,没有考虑系统响应特点,消噪效果不好,需一种有效的消噪方法。提出了一种基于倒谱模型新的滤波处理技术,从系统响应的角度,建立超声通道的小波倒谱模型,并通过对钢轨应力测试信号进行滤波处理,试验结果令人满意。     

火箭发动机基于神经网络非线性辨识的故障检测

应用神经网络方法，提出了一种液体火箭发动机故障实时检测算法。神经网络采用非线性辨识技术贴近发动机的工作过程，并输出包合发动机故障信息的辨识误差信号。若辨识误差变大超过一定阈值，检测逻辑就预报发动机故障。在发动机启动阶段离线训练神经网络，在发动机稳态过程可以采用离线或在线学习算法。实验研究表明神经网络可以成功地应用于大型泵压式液体火箭发动机的故障检测。     

基于卫星观测数据的弹道导弹初始状态估计

利用卫星探测数据对大气层外飞行的弹道导弹弹道进行估计。在极大似然估计中,由于卫星探测导弹运动的可观测性较差,使初始点估计变得十分病态,传统的Gauss Newton迭代算法不再适用,而采用较为复杂Levenberg Marquardt算法,分别对单颗卫星和两颗卫星的情况进行了Monte Carlo仿真,得到了各自的归一化残差测量误差(代价函数),结果表明该算法有效。     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.     

夜气辉对天基光学碎片探测的影响分析

设计并完成了夜气辉背景下的天基碎片观测试验，获取了综合谱段的观测数据。基于观测数据进行夜气辉的辐射特性及其对天基碎片探测的影响分析。结果表明，夜气辉辐射随纬度和高度呈现一定的分布特点，这些特点均符合夜气辉的理论分布规律。在约90 km处辐射最强，亮度可达到单位积分时间每平方角秒近15星等，这对恒星及碎片提取概率影响较大，其中，13等星的提取概率仅为40.5%。     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

Bayesian network-based extraction of lunar impact craters from optical images and DEM data

Impact craters are among the most noticeable geomorphological features on the planetary surface and yield significant information about terrain evolution and the history of the solar system. Thus, the recognition of impact craters is an important branch of modern planetary studies. Aiming at addressing problems associated with the insufficient and inaccurate detection of lunar impact craters, a decision fusion method within the Bayesian network (BN) framework is developed in this paper to handle multi-source information from both optical images and associated digital elevation model (DEM) data. First, we implement the edge-based method for efficiently searching crater candidates which are the image patches that can potentially contain impact craters. Secondly, the multi-source representations of an impact crater derived from both optical images and DEM data are proposed and constructed to quantitatively describe the two-dimensional (2D) and three-dimensional (3D) morphology, consisting of Histogram of Oriented Gradient (HOG), Histogram of Multi-scale Slope (HMS) and Histogram of Multi-scale Aspect (HMA). Finally, a BN-based framework integrates the multi-source representations of impact craters, which can provide reductant and complementary information, for distinguishing craters from non-craters. To evaluate the effectiveness and robustness of the proposed method, experiments were conducted on three lunar scenes using both orthoimages from the Lunar Reconnaissance Orbiter (LRO) and DEM data acquired by the Lunar Orbiter Laser Altimeter (LOLA). Experimental results demonstrate that integrating optical images with DEM data significantly decreases the number of false positives compared with using optical images alone, with F₁-score of 84.8% on average. Moreover, compared with other existing fusion methods, our proposed method was quite advantageous especially for the detection of small-scale craters with diameters less than 1000 m.     

探测复合材料层板基体裂纹的实验技术

介绍探测复合材料层板基体裂纹的三种实验技术:声波发射探测,超声波C扫描和复制带记录。在试验各阶段,应充分利用每种试验方法的优点,使每个试件比常规试验获取更多的试验数据,包括声波发射探测响应图,超声波对整个试件宽度扫描成像,以及沿着试件侧面厚度上的复制带获取图像。最初由声波发射显示试件加载期间基体裂纹的开始形成,通过超声波扫描能清晰分辨出第一条基体裂纹的出现;随着基体裂纹的发展,可综合应用三种实验技术,确定对基体断裂的评估。根据试验结果,对这三种实验技术作了评价。