多加速度计振动分离惯性补偿测力技术

为解决在高超声速脉冲风洞中进行大长细比等特殊模型测力实验所面临的惯性补偿问题,笔者提出了多加速度计振动分离惯性补偿方法。这一方法应用在长细比达20 :1 的模型气动力实验中,得到了较为理想的实验结果     

Periodic relative orbits of two spacecraft subject to differential gravity and electrostatic forcing

Coulomb forces between charged close-flying satellites can be used for formation control, and constant electric potentials enable static equilibria solutions. In this work, open-loop time-varying potential functions, which produce periodic, two-craft, Coulomb formation motions are demonstrated for the first time. This is done in the rotating Hill-Frame, with linearized gravity, and craft position components assumed in the form of simple harmonic oscillators. Substitution of the oscillatory functions into the dynamics, further constrains these functions, and yields necessary potential histories, to produce the periodic flow. The assumed position functions, however, are not arbitrary, since the dynamical model restricts what oscillatory trajectories are allowed. Specifically, a Hill-Frame integral of motion is derived, and this is used to show certain candidate periodic functions to be inadmissible. The system dynamics are then linearized to expose stability properties of the solutions, and it is established that asymptotic stability is impossible for all orbit families. Finally, the degree of instability in the assumed motions, over free parameter ranges, is determined numerically via the Floquet multipliers of the associated full-cycle state-transition matrices.     

高速颤振模型设计中颤振主要模态的判断

颤振模型设计时难以实现完全的动力学相似,需要对颤振主要模态进行合理选择。采用数值分析方法,对颤振模型设计时主要模态的选取问题进行研究。通过各阶模态振型下气动刚度系数的比较、指定运动形式下广义非定常气动力的计算和不同模态截断下颤振结果的收敛特性分析,研究了颤振分析时不同模态运动之间的相互影响,对模态运动引起的气动力和颤振特性变化进行评估。以高超翼面模型为研究对象的数值算例结果表明,几种分析方法所判断的颤振主要模态基本一致。其中基于振型的广义气动刚度系数参数,避免了非定常气动力的计算,可作为颤振模型设计或颤振分析时主要模态选取的快速判断方法。     

弯曲通道模拟离心条件下的主燃级和预燃级联焰试验

冲压转子发动机是冲压发动机和燃气涡轮发动机的有机结合,其结构简单。冲压转子发动机燃烧室由于其内部受到强离心力场的作用,燃烧室火焰的稳定燃烧以及传播都会受其影响。为了得到离心力场对分级燃烧中两级联焰的影响规律,本文进行了试验研究工作。针对燃烧室在强离心条件下的燃烧特点,采用弯曲通道模拟气流的离心效应。在弯曲试验段上对预燃级和主燃级进行了联焰研究,试验在常温常压条件下进行,进口气流速度范围为10~70m/s。试验中考察了离心力、燃油分级比例以及主燃级燃油喷射初始角度对联焰的影响,试验结果初步验证了燃烧方案的可行性,为冲压转子发动机燃烧室的研究奠定了基础。     

基于虚拟仪器的切削力监控技术研究

研制了一种基于虚拟仪器界面、供现场使用的高精度、高效率的金属切削过程监控系统。研究中采用回归分析、叠加原理及抛物线插值的方法建立切削力模型 ,并基于该模型进行参数估计来提取切削状态特征 ,进而监控整个切削过程     

火箭发动机激励检测铁路桥墩的研究

论述了把火箭发动机作为激励源对铁路桥梁桥墩施加动载荷以检测和评估桥梁桥墩质量的研究情况，给出了有关的实验和测量结果。     

大功率无电极高密度等离子体电磁推进概述

无电极高密度等离子体电磁推进技术已成为未来深空探测、载人航天和货运、太阳能电站以及航天器在轨服务与维护等空间任务中极具竞争力的核心推进技术之一。在梳理不同无电极等离子体电磁加速机制基础上,开展大功率无电极高密度等离子体电磁推进技术性能对比,给出新概念无电极场反构型电磁推进技术向未来超大功率拓展的优势和发展潜力,同步分析了该技术亟需解决的关键基础问题,旨在为中国新概念场反构型电磁推进技术的研发提供理论基础。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

实用化光力加速度计中单微球重复起支技术

针对光力加速度计的小型化应用,设计并制作了一种基于V型槽的片上光纤光阱,并采用机械振动方法实现了单微球重复起支。理论研究了利用机械振动方法实现微球起支、捕获的动力学过程。结果表明,只有当微球脱离捕获室底面的初始速度满足一定范围时才能稳定捕获,该初始速度范围与捕获室的几何参数有关。提出了利用两光纤中相向传播光的耦合功率监测微球捕获状态的方法,并通过实验完成了微球起支过程的自动控制,实现了单微球的重复起支与捕获。该片上光纤光阱制备方法和单微球重复起支技术可推动光力加速度计的实用化进程。