Receiver-channel based adaptive blind equalization approach for GPS dynamic multipath mitigation

Aiming at mitigating multipath effect in dynamic global positioning system (GPS) satellite navigation applications, an approach based on channel blind equalization and real-time recursive least square (RLS) algorithm is proposed, which is an application of the wireless communication channel equalization theory to GPS receiver tracking loops. The blind equalization mechanism builds upon the detection of the correlation distortion due to multipath channels; therefore an increase in the number of correlator channels is required compared with conventional GPS receivers. An adaptive estimator based on the real-time RLS algorithm is designed for dynamic estimation of multipath channel response. Then, the code and carrier phase receiver tracking errors are compensated by removing the estimated multipath components from the correlators’ outputs. To demonstrate the capabilities of the proposed approach, this technique is integrated into a GPS software receiver connected to a navigation satellite signal simulator, thus simulations under controlled dynamic multipath scenarios can be carried out. Simulation results show that in a dynamic and fairly severe multipath environment, the proposed approach achieves simultaneously instantaneous accurate multipath channel estimation and significant multipath tracking errors reduction in both code delay and carrier phase.     

Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory

The elliptical cross-section spiral equal-channel extrusion (ECSEE) process is simulated by using Deform-3D finite element software. The ratio m of major-axis to minor-axis length for ellipse-cross-section, the torsion angle u, the round-ellipse cross-section transitional channel L1, the elliptical rotation cross-section transitional channel L2 and the ellipse-round cross-section transitional channel L3 are destined for the extrusion process parameters. The average effective strain eave on cross-section of blank, the deformation uniformity coefficient a and the value of maximum damage dmax are chosen to be the optimize indexes, and the virtual orthogonal experiment of L16 (45) is designed. The correlation degree of the process factors affecting eave, a and dmax is analyzed by the numerical simulation results using the weights and grey association model. The process parameters are optimized by introducing the grey situation decision theory and the ECSEE optimal combination of process parameters is obtained: u of 120 , m of 1.55, L1 of 7 mm, L2 of 10 mm, and L3 of 10 mm. Simulation and experimental results show that the material can be refined with the optimized structural parameters of die. Therefore, the optimization results are satisfactory.     

Comparison of observed hmF2 and IRI 2007 model with M(3000)F2 estimation of hmF2 at low solar activity for an equatorial station

This is to investigate ways of improving the Equatorial F2-layer peak heights estimated from M(3000)F2 ionosonde data measured using the Ionospheric Prediction Service (IPS-42) sounder at Ouagadougou, Burkina Faso (Latitude +12.4°N, Longitude +1.5°W, Dip latitude +5.9°N) during a low solar activity year (1995). For this purpose, we have compared the observed h_mF2 (h_mF2_obs) deduced using an algorithm from scaled virtual heights of quiet day ionograms and the predicted h_mF2 values which is given by the IRI 2007 model (h_mF2_{IRI 2007}) with the ionosonde measured M(3000)F2 estimation of the h_mF2 values (h_mF2_est) respectively. The correlation coefficients R² for all the seasons were found to range from 0.259 to 0.692 for h_mF2_obs values, while it ranges from 0.551 to 0.875 for the h_mF2_{IRI 2007} values. During the nighttime, estimated h_mF2 (h_mF2_est) was found to be positively correlated with the h_mF2_obs values by the post-sunset peak representation which is also represented by the h_mF2_{IRI 2007} values. We also investigated the validity of the h_mF2_est values by finding the percentage deviations when compared with the h_mF2_obs and h_mF2_{IRI 2007}.     

基于相关匹配的弹道中段目标章动角估计

章动角是弹道中段目标的重要进动特征,可用于识别弹头和诱饵。首先提出了基于相关匹配的章动角估计方法,将观测的目标雷达截面积（RCS）序列与不同参数下的RCS序列模板进行相关匹配,搜索匹配函数的最大值,从而得到章动角的估计值。然后给出了具体的实现算法,将初始时刻的采样间隔设置为脉冲重复周期（PRI）的整数倍或1/K（K为整数,且K≥2）,在此基础上减少了匹配函数的计算量,并且可通过单层或多层相关匹配来估计章动角。仿真结果表明,由于RCS测量存在系统误差,相关匹配的章动角估计性能远优于最小二乘匹配。同时分析了全姿态RCS数据的角度采样间隔对相关匹配估计性能的影响。最后比较了多层相关匹配和单层相关匹配的估计性能和计算量。     

FX型相关处理方案及野值剔除算法

分析了甚长基线干涉测量等干涉测量技术中FX型相关处理方案存在的问题,提出了一种新的FX相关处理方案。该方案经过两次整数比特时延补偿将两站接收信号相对时延缩小到1 bit内,从而避免了相位卷绕现象的出现,同时省去了原方案中的小数比特时延补偿,接着对新方案的计算量和相关长度做了深入的分析;改进了一种野值剔除算法,使剔除过程不受相位随频率变化趋势的影响。蒙特卡洛仿真和“嫦娥二号”实测数据处理结果验证了改进的准确性和有效性。     

亚声速轴流压气机失速监测方法试验

为了研究轴流压气机失速先兆信号监测的有效算法,对亚声速轴流压气机试验台的孤立转子在不同转速下,从稳定工况到失速工况叶顶不同轴向位置进行了动态压力信号测量试验,采用自相关分析和方差分析算法对试验数据进行了对比分析。结果表明,该压气机为突尖型失速,在叶顶前缘附近能明显感受到失速先兆信号,自相关分析监测到失速先兆信号的时间明显早于方差分析,可更有效的达到失速预警的作用。     

基于混沌振子阵列的扩频信号捕获方法

在低信噪比下提出了结合混沌振子阵列及相干相关实现对扩频信号的捕获方法．针对混沌振子的数学模型,用混沌系统的相轨迹特性来分析对扩频信号的捕获过程,以Lyapunov指数（LE）作为实现捕获及提取载波多普勒频率的判断依据,再由跟踪环路完成对扩频码相位的跟踪．对DSSS／BPSK仿真结果表明,本方法可以实现扩频信号快速捕获,同时提高了捕获概率及检测灵敏度。     

纤维金属层板的静力学性能测试与预测模型

为研究纤维金属层板(FML)的非线性变形行为和损伤机制,对GLARE2-2/1、GLARE2-3/2、GLARE3-2/1、GLARE3-3/2、GLARE6-2/1和GLARE6-3/2层板进行了静力拉伸测试,同时采用数字图像相关(DIC)技术观测了GLARE2-3/2、GLARE3-3/2和GLARE6-3/2试样的全场应变,基于修正的经典层板理论建立了考虑金属层塑性和预浸料层损伤的理论本构模型,模拟预测了GLARE层板的轴向弹性模量、断裂强度和应力-应变曲线,与测试结果进行了对比分析。对经历载荷作用的试样,采用腐蚀去层的方法研究了内部预浸料层的损伤。结果显示:铺层增加后受损伤预浸料层的性能退化更多,采用DIC技术能够有效检测静力拉伸载荷下GLARE试样内预浸料层的损伤,理论模型方法能够很好地模拟GLARE试样的静力拉伸试验过程。     

广汉机场强对流天气潜势预报方法研究

利用2008-2010年6-8月共9个月的地面观测资料、高空观测资料和探空资料,分析发生强对流天气的天气形势,进行相关性分析并使用消空法筛选有利于强对流天气发生的物理量因子和指数.分析和检验结果表明:在系统性天气过程影响下K指数、沙氏指数(SI)、700hPa假相当位温(θse(700))和地面24小时变温(△T24)对广汉机场12小时强对流天气潜势预报有较好的指导作用.     

一种应用图像匹配技术确定CBERS-02卫星WFI相机拼接区的方法

提出了一种应用图像匹配技术确定中巴资源一号卫星 0 2星 (简称CBERS - 0 2卫星 )WFI相机拼接区的方法。文章首先介绍CBERS - 0 2卫星WFI相机的特性 ;然后提出应用图像匹配中的相关系数方法 ,定位WFI相机拼接区像元在阵列和卫星飞行方向的位置 ,并给出了去除拼接区后的图像 ;最后对结果进行了讨论。