月球着陆器精确定点及安全着陆技术研究

在未来月球探测中,需要对一些地形复杂的区域进行探测,而在这些区域软着陆,潜在的危险性增加,这就要求着陆时具有较高的定位精度并能够自动避险。当前,由于着陆时定点的误差较大,在小范围安全地域准确着陆很难。研究了一种精确定位、安全的软着陆方式,它在软着陆过程中增加了悬停阶段。在这一阶段中,通过着陆区危险地域的识别、着陆地点位置误差的计算,加上对着陆器横向漂移的控制技术,使着陆地点的精度以及着陆生存率大为提高,能够满足未来月球探测的软着陆要求。     

一种平板螺旋式诱导轮的扬程计算法

目前平板螺旋式诱导轮的扬程计算法大都没有考虑诱导轮出口涡流区的影响,计算出的扬程和实际扬程有较大的偏差,涡流区的存在一方面会减小主流过流面积,使液流出口速度增大,损失增加,另一方面涡流运动自身也会消耗能量,使得诱导轮的扬程有所降低.以径向平衡理论为基础,考虑诱导轮出口涡流区的影响,提出一种扬程的修正计算法,用该方法对两种诱导轮进行了计算,计算结果和试验实测值比较接近,可以更准确的计算非空化工况下诱导轮的扬程.     

基于多Agent的机群编队导航系统设计与研究

智能化建模在装备作战仿真领域中独居优势.将多Agent技术程序设计方法引入机群编队导航系统的设计中,对模型进行了顶层设计并分析了Agent子系统之间的信息交互过程,为机群编队导航系统的研发和设计提供了新的思路.     

水气动量交换的实验研究

在风浪槽中进行水气动量交换实验，测量了不同风速和风区下的波浪及空气湍流流场。测量数据表明水面上风速分布符合对数律，水气界面附近在小范围的动量交换常通量层。阻力系数ＣＤ随风速增加线性增长，随波龄增加而减小。这一趋向与理论分析及外海帝测结果一致。对风浪发展过程中波浪和空气湍流谱结构的分析证明了水气运动的耦合关系。     

The Primordial Helium-4 Abundance from Observations of a Large Sample of Blue Compact Dwarf Galaxies

We use a sample of 45 low-metallicity H II regions in blue compact dwarf (BCD) galaxies to determine the primordial helium abundance YP with a precision better than 5%. We have carefully investigated the physical effects which may make the He I line intensities deviate from their recombination values such as collisional and fluorescent enhancements, underlying He I stellar absorption and absorption by Galactic interstellar Na I. By extrapolating the Y vs. O/H and Y vs. N/H linear regressions to O/H = N/H = 0, we obtain YP = 0.244±0.002 and 0.245±0.001, respectively, higher than previous determinations (YP = 0.230 - 0.234). Part of the difference comes from the fact that previous investigators have not taken into account underlying He I stellar absorption, especially in the NW component of the BCD I Zw 18 which, because of its extremely low metallicity plays a key role in the determination of YP. We derive a slope dY/dZ = 2.3±1.0, considerably smaller than those derived before. With this smaller slope and taking into account the errors, chemical evolution models with an outflow of well-mixed material can be built for star-forming dwarf galaxies which satisfy all the observational constraints. Our YP gives _bh ₅₀ ² = 0.058±0.007,f consistent with the lower limit set by dynamical measurements and X-ray observations of clusters of galaxies. It is also consistent, within the framework of standard big bang nucleosynthesis theory, with measurements of primordial 7Li in galactic halo stars and with the D/H abundance measured in absorption systems toward quasars by Burles and Tytler (1997).     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

220GHz返波振荡器高频特性及互作用研究

文章对220GHz折叠波导慢波电路的返波传输特性进行了研究。介绍了返波振荡器的工作原理,结合模拟仿真和理论分析,针对220GHz的返波振荡器,研究各个参数对冷特性的影响。对220GHz返波振荡器的高频结构进行了初步设计,给出了结构参数以及相应的模拟结果。结果表明在不考虑损耗的情况下,设计的结构可以在中心频率220GHz处获得约为0．5W的功率,可调谐范围是30GHz,调谐电压范围为5．5kV-12kV。     

几种常用格式和湍流模型在高速流动中的适用性研究

针对高超声速飞行器中存在的强激波、激波/边界层干扰、分离、湍流等复杂流动现象,对比分析了当前计算流体力学中的主要空间离散格式及湍流模型,发现不同格式对强激波的分辨率基本相同,Roe和LDE(low diffusion E-CUSP(convective upwind split pressure))格式对摩擦因数和传热系数的模拟优于其他格式;S-A(Spalart-Allmaras)一方程湍流模型计算的摩擦因数比k-ωSST(shear stress transport)两方程湍流模型高10%左右,而后者预测的分离区约为前者的2倍,且分离点靠前.     

钛合金熔模精铸氧化锆陶瓷型壳／金属界面反应研究

通过实际浇注和真空扩散连接分别制取了钛／型壳界面，借助ＳＥＭ、ＥＰＭＡ和显微硬度仪等分析测试手段对所得界面进行了深入研究，初步提出了以Ｚｒ、Ｏ元素向钛基体内的扩散为主导的界面反应机制。实验结果表明，界面反应并非在整个界面上均衡推进，而是在浓度、温度、能量起伏、以及陶瓷颗粒位向适宜的区域优先发生界面反应