永磁式双凸极电机系统稳态运行模型研究

以一台12/8极永磁式双凸极电机为研究对象,以有限元法对电机内电磁场分析结果为基础,对双凸极电机系统在不同控制方式下的稳态运行过程进行分析,得到与之相应的一阶非线性常微分方程。在Matlab编程环境下对各微分方程进行求解并结合电机的数学模型,建立永磁式双凸极电机系统稳态运行仿真模型,并将仿真得到的电流波形和机械特性曲线与实测得到的相关波形对照,二者间有很好的一致性。表明提出的双凸极电机系统研究方法具有一定的实用价值。     

关于多元函数的二阶混合偏导数不相等的例子

指明考察多元函数的二阶混合偏导数不相等问题的理论依据，给出两类二元函数的二阶混合偏导数不相等的例子，并说明在此基础上取得新例子的方法。     

中国股市涨跌停板制度的实证分析及政策建议

通过对深圳股市2001年上半年前后两个时期A、B两种股票涨跌停现象的统计分析,发现两种股票的涨跌停频率较高, B股的涨跌频率更是远高与A,并且涨停明显地多于跌停.因此本文认为我国股市当前10%的价格限制比例偏小,同时应该对涨跌设置不同的限制幅度.     

Bifurcation in a 3-DOF Airfoil with Cubic Structural Nonlinearity

Limit cycle oscillations (LCOs) as well as nonlinear aeroelastic analysis of a 3-DOF aeroelastic airfoil motion with cubic restoring moments in the pitch degree of freedom are investigated.Aeroelastic equations of an airfoil with control surface in an incompressible potential flow are presented in the time domain.The harmonic balance (HB) method is utilized to calculate the LCO frequency and amplitude for the airfoil.Also the semi-analytical method has revealed the presence of stable and unstable limit cycles,along with stability reversal in the neighborhood of a Hopf bifurcation.The system response is determined by numerically integrating the governing equations using a standard Runge-Kutta algorithm and the obtained results are compared with the HB method.Also the results by the third order HB (HB3) method for control surface are consistent with the other numerical solution.Finally,by combining the numerical and the HB methods,types of bifurcation,be it supercritical,subcritical,or divergent flutter area are identified.     

Scatter factor confidence interval estimate of least square maximum entropy quantile function for small samples

Classic maximum entropy quantile function method (CMEQFM) based on the probabil-ity weighted moments (PWMs) can accurately estimate the quantile function of random variable on small samples, but inaccurately on the very small samples. To overcome this weakness, least square maximum entropy quantile function method (LSMEQFM) and that with constraint condition (LSMEQFMCC) are proposed. To improve the confidence level of quantile function estimation, scatter factor method is combined with maximum entropy method to estimate the confidence inter-val of quantile function. From the comparisons of these methods about two common probability distributions and one engineering application, it is showed that CMEQFM can estimate the quan-tile function accurately on the small samples but inaccurately on the very small samples (10 sam-ples); LSMEQFM and LSMEQFMCC can be successfully applied to the very small samples;with consideration of the constraint condition on quantile function, LSMEQFMCC is more stable and computationally accurate than LSMEQFM; scatter factor confidence interval estimation method based on LSMEQFM or LSMEQFMCC has good estimation accuracy on the confidence interval of quantile function, and that based on LSMEQFMCC is the most stable and accurate method on the very small samples (10 samples).     

反高斯分布环境因子估计

研究了反高斯分布环境因子估计。根据指数分布和对数正态分布环境因子的定义及数据折算与综合的方便,给出了反高斯分布环境因子的定义。据此定义,用经典方法和贝叶斯方法推证了环境因子的上、下限,并给出了一些近似式以便于计算。实例计算结果较令人满意。     

Formability enhancement in hot spinning of titanium alloy thin-walled tube via prediction and control of ductile fracture

The damage and fracture in hot spinning of titanium alloy is a very complex process under the combined effects of microstructure evolution and stress state. In this study, their dependences on processing parameters were investigated by an integrated FE model considering microstructure and damage evolution, and revealing the effects of microstructure and stress states on damage evolution. The results show that the inner surface of workpiece with the largest voids volume fraction is the place with...     

Prediction of forming limit curve （FLC） for AI-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve （FLC） of the third generation aluminum-lithium （Al-Li） alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical prediction of the FLC of 2198-T3 is based on the M-K theory utilizing respectively the von Mises, Hill＇48, Hosford and Barlat 89 yield functions, and the different predicted curves due to different yield functions are compared with the experimentally measured FLC of 2198-T3. The results show that though there are differences among the four predicted curves, yet they all agree well with the experimentally measured curve. In the area near the planar strain state, the predicted curves and experimentally measured curve are very close. The predicted curve based on the Hosford yield function is more accurate under the tension-compression strain states described in the left part of the FLC, while the accuracy is better for the predicted curve based on Hill＇48 yield function under the tension-tension strain states shown in the right part.     

Prediction of forming limit curve (FLC) for Al-Li alloy 2198-T3 sheet using different yield functions

The Forming Limit Curve (FLC) of the third generation aluminum-lithium (Al-Li) alloy 2198-T3 is measured by conducting a hemispherical dome test with specimens of different widths. The theoretical pred...     

飞机结构强度试验应急载荷限定系统

多轮多支柱起落架飞机主起落架数量较多，试验机及试验设备重量大。试验应急卸载时，试验件和设备重量、以及加载过程中试验件变形所聚集能量快速释放的不协调性易对支持点结构产生较大冲击载荷，且该载荷不可控，影响试验的考核，存在安全隐患。针对多轮多支柱起落架飞机的强度试验要求，设计一种载荷限定系统。在应急卸载或者试验停试情况下，能够为非支持点起落架输出设定载荷，保证应急瞬间所产生的所有载荷按要求分配到所有起落架上，从而防止支持点起落架超载；试验过程中，能够对非支持点起落架施加试验主动载荷。利用仿真软件验证了系统原理的可行性。依据原理设计载荷限定系统，对其结构和工作性能进行应用验证，并在某型飞机全机疲劳试验中进行应用调试，结果表明，该系统完全能够满足试验要求。