导航星座的自主导航技术--卫星自主时间同步

基于星载原子时钟频率稳定性的Allan方差表达,建立系统状态方程,并以星间双向测量伪距差作为基本观测量,组成系统测量方程,从而可以设计适用于导航星座卫星时间同步的Kalman滤波算法。系统仿真结果表明：通过对星间双向测量数据的滤波处理,能够实现星座卫星时间精密同步。     

Comparison of observed ionospheric vertical TEC over the sea in Indian region with IRI-2016 model

The vertical ionospheric TEC values obtained from GAGAN grid based ionospheric delay correction values over the sea in the Indian equatorial region have been compared with the corresponding values derived from the International Reference Ionosphere model, IRI-2016. The objective of this work is to study the deviation of the vertical TEC derived from the IRI model from ground truths over the sea for different conditions. This will serve the basic intention of assessing the candidature of the IRI model as an alternative ionospheric correction model in navigation receivers in terms of accuracy. We have chosen different solar activity periods, seasons, geomagnetic conditions, locations etc. for our comparison and analysis. The TEC values by the IRI-2016 were compared with the actual measured values for the given conditions and errors were obtained. The measured vertical TEC values at the ionospheric grid points were derived from the GAGAN broadcast ionospheric delay data and used as reference. The IRI model with standard internal functions was used in estimating the TEC at the same ionospheric grid points. The errors in the model derived values are statistically analysed. Broadly, the results show that, for the Indian sector over the sea, the IRI model performs better on quiet days in off equatorial regions, particularly in the northern region. The overall performance degrades for other conditions with the model generally underestimating the true TEC values and most severely in the equatorial region. The performance is worst in this region for the disturbed days of the equinoctial period. The comparison study is also done with the TEC data measured directly by dual frequency GPS receivers. The results were found to be in general agreement with those obtained by comparing the model with GAGAN broadcast data as reference. This study will be useful in considering the IRI-2016 model for real time estimates of TEC as an alternative to the current parametric model in a satellite navigation receiver in absence of other options.     

Establishment of atmospheric weighted mean temperature model in the polar regions

Due to the special geographical location and extreme climate environment, the polar regions (Antarctic and Arctic) have an important impact on global climate change. Atmospheric weighted mean temperature (Tm) is a crucial parameter in the retrieval of precipitable water vapor (PWV) from the zenith wet delay (ZWD) of ground-based Global Navigation Satellite System (GNSS) signal propagation. In this paper, the correlation between weighted mean temperature and surface temperature (Ts) is studied firstly. It is shown that the correlation coefficients between Tm and Ts are 0.93 in the Antarctic and 0.94 in the Arctic. The linear regression Tm model and quadratic function Tm model of the Antarctic and the Arctic are established respectively using the radiosonde profiles of 12 stations in the Antarctic and 58 stations in the Arctic from 2008 to 2015. The accuracies of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model which is a state-of-the-art global Tm model are verified using the radiosonde profiles from 2016 to 2018 in the Antarctic and Arctic. Root Mean Square (RMS) errors of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model in the Antarctic are 3.07 K, 2.87 K and 4.32 K respectively, and those in the Arctic are 3.53 K, 3.38 K and 4.82 K, which indicates that the quadratic function Tm model has a higher accuracy compared to linear regression Tm model, and the accuracies of the two regional Tm models are better than that of GPT2w Tm model in the polar regions. In order to better evaluate the accuracy of Tm in the PWV retrieval, the PWV values of radiosondes are used for comparisons as the reference value. The RMS errors of PWV derived from the two Tm models are similar for 1.28 mm in the Antarctic and 1 mm in the Arctic respectively. In addition, the spatial and temporal variation characteristics of Tm are analyzed in the polar regions by spectral analysis of Tm data using fast Fourier transform. The results show that the Tm has obvious seasonality and annual periodicity in the polar regions, and the maximum difference between warm season and cold season is about 63 K. After comparing and analyzing the influences of latitude, longitude and elevation on the Tm in the polar regions, it is found that latitude and elevation have a greater influence on the Tm than the longitude. As the latitude and elevation increase, the Tm decreases, and vice versa in the polar regions.     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

基于Mecanum轮配送车的视觉与磁带双重导引技术研究

针对卫星总装过程中提出的物料配送需求,设计并实现了以Mecanum轮全方位移动平台为基础,可在狭窄配送通道内快速、灵活移动的智能物料配送车。结合总装现场实际环境条件,配送车采用了视觉导引与磁带导引相结合的智能导引策略,有效消除了光照强度变化、地面裂纹、电磁信号干扰等环境因素对车道线采集的影响,最终实现总装物料从库房至多工位的自动配送。     

Factor graph based navigation and positioning for control system design: A review

Navigation and positioning is an important and challenging problem in many control engineering applications. It provides feedback information to design controllers for systems. In this paper, a bibliographical review on factor graph based navigation and positioning is presented. More specifically, the sensor modeling, the factor graph optimization methods, and the topology factor based cooperative localization are reviewed. The navigation and positioning methods via factor graph are considered a...     

Visual inspection of aircraft skin: Automated pixel-level defect detection by instance segmentation

Skin defect inspection is one of the most significant tasks in the conventional process of aircraft inspection. This paper proposes a vision-based method of pixel-level defect detection, which is based on the Mask Scoring R-CNN. First, an attention mechanism and a feature fusion module are introduced, to improve feature representation. Second, a new classifier head—consisting of four convolutional layers and a fully connected layer—is proposed, to reduce the influence of information around the area of the defect. Third, to evaluate the proposed method, a dataset of aircraft skin defects was constructed, containing 276 images with a resolution of 960 × 720 pixels. Experimental results show that the proposed classifier head improves the detection and segmentation accuracy, for aircraft skin defect inspection, more effectively than the attention mechanism and feature fusion module. Compared with the Mask R-CNN and Mask Scoring R-CNN, the proposed method increased the segmentation precision by approximately 21% and 19.59%, respectively. These results demonstrate that the proposed method performs favorably against the other two methods of pixel-level aircraft skin defect detection.     

航空发动机设计中采用CAD技术的研究

为了进一步加强ＣＡＤ（ＣｏｍｐｕｔｅｒＡｉｄｅｄＤｅｓｉｇｎ）技术在航空发动机设计领域的应用,主要介绍ＡｕｔｏＣＡＤ图形软件的辅助绘图、三维建模的功能及在航空发动机领域的一些应用。目的是在航空发动机设计领域推广及运用ＣＡＤ技术改善发动机的设计方法。     

关于计算机2000年问题的探讨

计算机２０００年问题已引起人们的普遍关注,必须在进入２０００年前予以妥善解决。对其可采用修改应用程序、更换系统软件、更换硬件设备等多种办法进行处理。在应用程序的修改中采用变形的日期移位法是对大多数办公系统容易实现且又行之有效的办法。     

结构光三维视觉系统研究

介绍了结构光三维视觉原理,在广义坐标系中采用投影和透视变换理论建立了结构光三维视觉模型。在此基础上,提出了基于非线性最小二乘法的模型参数标定方法,并建立了结构光三维视觉系统,给出了实验结果。