Late Stages of Stellar Evolution

A large fraction of ISO observing time was used to study the late stages of stellar evolution. Many molecular and solid state features, including crystalline silicates and the rotational lines of water vapour, were detected for the first time in the spectra of (post-)Asymptotic Giant Branch (AGB) stars. Their analysis has greatly improved our knowledge of stellar atmospheres and circumstellar environments. A surprising number of objects, particularly young planetary nebulae with Wolf-Rayet (WR) central stars, were found to exhibit emission features in their ISO spectra that are characteristic of both oxygen-rich and carbon-rich dust species, while far-IR observations of the PDR around NGC 7027 led to the first detections of the rotational line spectra of CH and CH⁺. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

开发月球车用的月表环境的地面模拟方法研究

当前中国正在进行自己的探月工程,预计将会发射月球车登陆月球表面.在研制月球探测器过程中,为了在地面验证月球车的可靠性和各项功能(如着陆冲击、自主巡航和遥控),必须建立相应的地面试验中心.根据目前对月球表面环境的认识和现有的仿真技术,文章提出了实现月表综合环境模拟的试验设施的设想.由于月球表面环境非常恶劣并且月表的地形也非常复杂,文章提出了一种组合式月表环境模拟器的设想.主要部分是模拟各种月貌特征(如陨石坑、斜坡、沟壑等)的可移动单元.每个单元是一个用模拟月壤制作的小沙盘,其化学成分、组成颗粒分布和力学性能和已经获取的真实月壤样品相似.根据不同的试验要求,选择相应的单元按照一定的规律组合成为试验场.这样在有限的场地面积内可以按需实现对月表不同地域的地貌特征模拟.同时,可以选择少量单元的组合构成更小规模的试验场,以方便与其它环境模拟器(如落塔,热/真空容器等)联合,实现模拟月表的综合环境.     

利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

凝聚式过滤器的开发与设计

着重介绍了凝聚式过滤器的开发、设计及与空气压缩机厂原有产品在性能上是有区别的。新的凝聚式过滤器实现了对压缩空气进行切向进气，用丝网除沫器和精滤芯等代替原有的陶瓷管堆积过滤和毛毡缠绕过滤法。在过滤精度，气流均匀性阻力特性等性能上有一定优势，且成本低、数命长，经济实用。     

Experimental investigation on silica dust lofting due to charging within micro-cavities and surface electric field in the vacuum chamber

The charged dust particles can be mobilized electrostatically by the repulsion between the adjacent grains and the surface electric field due to the incoming electron current and the charge accumulation within the micro-cavities. In this study, the experimental results of the initial vertical launching velocities and the maximum dust heights are compared with the estimated values for the lofted spherical dust grains by the patch surface charging equations. Silica particles with the sizes between <6 and 45?µm in radius are loaded on a graphite plate, and they are exposed to the electron beam with 450?eV energy under 4?×?10^?3?Pa vacuum chamber pressure. During the first set of the experiments, the dust samples are tested without an initial compression process and an additional horizontal electric field. Second, the dust samples are compressed by two different weights in order to increase the packing density under approximately 780.7?Pa and 3780?Pa. Finally, the dust grains are placed between the two parallel aluminum plates to apply approximately 2000?V/m and 4800?V/m horizontal electric field. A high-speed camera is used to record the transportation of the dust grains together with a microscopic telescope, and the results point out that the patch surface dust-charging model estimations are in agreement with the first experiments. On the other hand, the dust particles from the compressed samples are lofted with higher velocities than the estimations, and the number of the dust lofting observations decreases significantly, which demonstrates the importance of the micro-cavities and the increased charging requirement to overcome the contact forces. When the horizontal electric field is present, the initial vertical launching velocities are measured to be lower than the other experiments, which can be attributed to the decreased charging requirement for the dust lofting as a result of inter-particle collisions and rolling motion. According to the experimental results, the electrostatic dust transportation can be controlled not only by the ambient plasma and the solar irradiation on the airless planetary bodies, but also by the surface properties such as the contact surfaces between the dust grains, the number of the micro-cavities related to the packing density, and the presence of the horizontal electric field contributing to the external forces by other particle motions.     

On a non-primordial origin of the cosmic background radiation and pregalactic density fluctuations

Dusty pregalactic Population III objects may provide a mechanism for an effective thermalization of the star radiation. They may generate the observed microwave background and so the high cosmic photon entropy. Assuming a tepid universe a smaller primordial entropy contribution results in reasonable mass scales and amplification factors of pregalactic density fluctuations.     

天基微小空间碎片探测研究

随着空间碎片数量的不断增多,天基微小空间碎片探测已经成为一个热点．首先介绍了空间碎片在低地球轨道上的分布情况以及它对于航天器的危害,然后介绍了国外微小碎片探测器的基本情况,并在这些探测结果的基础上提出了一个探测器方案．这种探测器的传感器采用了新型的压电材料聚偏二氟乙稀(PVDF),使用了飞行时间法(TOF)准确测定空间碎片的飞行速度,以及快脉冲分析系统分析碎片的质量．     

铝颗粒云燃烧研究进展

为探究铝颗粒云燃烧特性,把握其研究进展,并为后续研究工作提供参考,本文首先简述了铝颗粒点火、燃烧过程,总结了铝颗粒燃烧机理;其次,综述了铝颗粒云燃烧的实验、理论和模拟研究进展,从不同维度分析了影响颗粒云火焰速度的关键参数,并提出颗粒云燃烧的研究方向,包括提升颗粒云燃烧实验颗粒分散均匀性与表征精度、降低火焰传播速度等实验结果散差、改善颗粒云燃烧理论预测模型精度及构建实用的颗粒云燃烧模拟CFD模型。     

“嫦娥三号”探测器月尘环境分析及试验要求

"嫦娥三号"是我国首个成功实施地外天体表面就位探测的航天器,在其研制过程中充分考虑了月面环境对探测器的影响,开展了针对性设计及地面验证工作。文章综述了探测器针对月尘环境方面的设计因素,总结了月面月尘激扬的因素及其相关数值分析工作,对月尘验证试验的设计及条件制定进行了说明。相关结果或工作思路可为后续月面探测器及火星表面探测器的研制提供参考。     

计算模拟月壤颗粒吸收及散射特性的一种球叠加模型

针对模拟月壤复杂的外形特征以及多相非均质的微观结构,提出了一种计算模拟月壤颗粒吸收及散射特性的球叠加模型。根据模拟月壤颗粒的形状指数和分形特征识别结果,归纳了4种主要的模拟月壤颗粒类型,并采用蒙特卡罗光线跟踪法研究了这4种颗粒在单色平行光照射下的吸收及散射特性。与已有的非球形颗粒辐射特性的算法比较显示,该模型具有良好的计算准确性。在数值计算的基础上,分析了颗粒尺度参数及光学常数对其自身辐射特性的影响,并通过改变平行光照下的光线入射角度,分析了非球形颗粒的朝向对其自身辐射特性的影响。由计算结果推断,该模型不仅可以应用于计算模拟月壤颗粒的辐射特性,还可以满足其他适用于几何光学近似的非球形粒子。