卫星导航信号畸变导致的测距偏差的估计方法

为定量评估导航信号的测距性能,本文研究了在轨卫星导航信号畸变导致的测距偏差估计问题。基于Vernier采样原理利用大口径抛物面天线采集在轨卫星导航信号,经数据处理获得一个伪码周期的脉冲波形。在此基础上,对该波形起点位置进行精确估计,然后根据延迟锁定环工作原理产生超前本地波形和滞后本地波形,获得E-L鉴别器曲线,最后估计鉴别器曲线的零交叉点偏差,该偏差即为卫星导航信号畸变导致的测距偏差。利用北斗卫星采集信号,获得了B1频点I支路信号的测距偏差,验证了该估计方法的正确性。     

150kV逆变电源性能优化及其束源特性

为了进一步提高电子束流发生系统工作的可靠性和稳定性,提高电子束加工质量,采用AC-DC-AC-DC-AC-DC的拓扑电路、新型功率变压器、高压脉冲检测技术、优化的束流反馈控制与灯丝加热电流闭环反馈控制技术等,分别优化了高压加速电源、偏压电源与灯丝加热电源。将所研制逆变电源与150 k V/30 k W电子枪、真空系统等组成了一套电子束流发生系统,测试了该电子束流发生系统输出的高压、最大束流以及灯丝加热电流、偏压变化对束流输出的影响。试验结果表明:经过优化的逆变电源高压输出达到-150 k V,高压输出线性度较好,最大束流达到200 m A;高压、灯丝加热电流给定时,随着偏压降低,束流输出逐渐增大;高压、偏压给定时,随着灯丝加热电流增大,束流输出存在死区、线性增大区和恒流区。     

北斗卫星导航空间信号模拟畸变研究

针对卫星导航信号生成载荷故障会导致信号畸变,对北斗卫星导航信号模拟进行了研究分析。首先,建立了北斗导航信号模拟畸变的数学模型并对其进行了理论分析;其次,推导了北斗信号发生模拟畸变后的相关函数、功率谱密度函数和相关损耗,并仿真分析了北斗信号模拟畸变的相关峰曲线、功率谱密度曲线和相关损耗曲线;最后,利用S曲线及S曲线锁定点偏差的模型,仿真了北斗模拟畸变信号S曲线及S曲线锁定点偏差,并分析了北斗信号发生模拟畸变对测距性能产生的影响。结果表明：北斗信号发生模拟畸变的畸变程度越大,伪距测量误差越大,则导航系统的测距精度和定位精度越低,增强系统的完好性越小。     

基于修正罗德里格参数的小卫星SSUKF姿态确定

用无陀螺的三轴稳定偏置动量小卫星三轴磁强计和太阳敏感器获得观测矢量,提出了一种基于超球面分布采样Unscented变换滤波(SSUKF)和修正罗德里格参数(MRPs)的姿态估计方法,给出了算法模型.SSUKF在保证滤波性能的基础上减少了采样点个数,减轻了星载计算机的负载;用MRPs描述小卫星姿态大幅减少了计算量.某小卫星的仿真结果表明:算法兼顾了精度、收敛速度和鲁棒性,且提高了计算效率,适于小卫星.     

栅极偏压对纳米金刚石薄膜沉积过程的影响

在HFCVD系统中施加栅极偏压和衬底偏压,采用双偏压成核和栅极偏压生长的方法成功制备了高质量的纳米金刚石薄膜.采用显微Raman高分辨率SEM和AFM等现代理化分析手段分析纳米金刚石膜的微结构,结果表明双偏压显著促进了金刚石的成核密度,平均晶粒尺寸在20 nm以内.试验观察和理论分析表明栅极偏压促进了热丝附近的等离子体浓度,提高了衬底附近的碳氢基团和氢原子浓度,提高了金刚石的成核密度、在保持晶粒的纳米尺寸的同时保持了较高的成膜质量和较低的生长缺陷.     

极端低温下电液伺服阀温漂特性分析

针对电液伺服阀在极端低温下温漂大的问题，以＋40℃时电液伺服阀初始零偏为基准，采用线性回归方法分析了某型射流管伺服阀不同温度的零偏试验数据，得到了极端低温下的伺服阀温漂与＋40℃时初始零偏的数学关系。分析与试验结果表明：极端低温时射流管伺服阀的温漂与＋40℃时的初始零偏存在非常显著的线性关系。温漂与电液伺服阀制造与装配工艺过程密切相关，与结构及其装配不对称有关。电液伺服阀结构上的微观不对称现象，在极端低温下显现出来，尤其是呈现出较大的温漂。降低温漂的主要措施是提高电液伺服阀结构与装配的对称性，降低初始零偏。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

远动通讯规约CDT中间余式与校验码算法的研究

CDT通讯规约在我国电力系统的调度系统中应用广泛 ,但规约本身存在传输效率不高等缺点。文中提出一种适用于 CDT通讯规约生成多项式和中间余式的计算机实现的算法 ,可简化 CRC校验码计算方法 ,从而达到提高传输效率的效果     

Provocative radio transients and base rate bias: A Bayesian argument for conservatism

Most searches for alien radio transmissions have focused on finding omni-directional or purposefully earth-directed beams of enduring duration. However, most of the interesting signals so far detected have been transient and non-repeatable in nature. These signals could very well be the first data points in an ever-growing data base of such signals used to construct a probabilistic argument for the existence of extraterrestrial intelligence. This paper looks at the effect base rate bias could have on deciding which signals to include in such an archive based upon the likely assumption that our ability to discern natural from artificial signals will be less than perfect.     

扩频系统中伪码防错锁技术研究

针对扩频系统中出现的伪码错锁问题,分析了产生伪码错锁的原因,根据伪码自相关性和互相关性特点,从伪码捕获策略、错锁自动判决策略等角度研究了伪码防错锁措施：选择自相关性和互相关性尽可能好的码;合理设置捕获门限;减小多普勒捕获范围;采用并行伪码捕获方法,并在捕获过程中防止载波错捕现象发生;单独建立验证通道,进行相关值比较判决等。实践表明,采用文中方法可提高正确捕获概率,缩短捕获时间,从硬件设计上有效解决了伪码错锁问题。