6156-T4铝合金焊接加筋薄壁结构剩余强度评估的CTOD方法

为保证飞机设计满足损伤容限性能要求,有必要对其进行剩余强度评估。针对6156-T4铝合金焊接连接薄壁结构进行了R曲线和剩余强度试验,判断了裂纹扩展经过筋条时的裂纹扩展路径,测量了母板和筋条两个方向的裂纹扩展速率,并采用不同的断裂准则和分析方法对单及双跨度多个初始裂纹长度焊接加筋薄板的剩余强度进行了预测。结果表明:裂纹扩展在经过筋条时,同时沿着母板和筋条继续扩展,筋条上的裂纹扩展方向垂直于母板且两个方向的裂纹扩展速率基本相同;采用净截面屈服准则进行剩余强度预测时会低估这种韧性较好的焊接连接薄壁结构的剩余强度;基于SINTAP-FITNET评价体系,以裂纹尖端张开位移(CTOD-δ5)作为裂纹尖端弹塑性表征参量进行剩余强度预测时,预测结果比采用K曲线预测方法精度高。     

Nb/Nb5Si3微叠层材料及其制备技术

Nb/Nb5Si3合金是未来最具潜力的超高温结构材料,实现该材料的结构微叠层化是一种新颖的材料设计思路和制备方法.Nb/Nb5Si3微叠层材料是将Nb和Nb5Si3按一定的层间距及层厚比以ABABAB型交互重叠结构形成的多层材料,其几种典型的制备技术包括热压、等离子喷涂、磁控溅射和电子束物理气相沉积(EB-PVD).其中EB-PVD是一种最适合工程应用的Nb/Nb5Si3微叠层材料制备方法,结构和功能复合、纳米化叠层、高韧化工艺是EB-PVD技术制备Nb/Nb5Si3微叠层材料的发展方向.     

低纬(海南)地区电离层偶发E层的潮汐类周期研究

基于低纬(海南)台站(19.5°N,109.1°E)电离层测高仪在2004年观测到的偶发E层(Es)临界频率(f₀E_s)和虚高(h'E_s)数据,利用谱分析方法,给出了中国低纬地区Es层在全年和不同季节内的短周期变化特性.对全年数据谱分析表明,Es层除具有非常强的24h周期外,还具有显著的12h和8h周期.对不同季节内两个参数的谱分析进一步表明,8h周期主要出现在f₀E_s参数的春秋分季和夏末及在h'E_s参数的几乎所有季节;6h周期主要出现在f₀E_s参数的11-12月.海南低纬Es层中具有显著的6h和8h周期特性,特别是这两个周期还能同时出现在冬季,这是以往研究中不曾发现的新结果.初步分析认为,Es层的6h和8h周期极可能是分别由1/4日和1/3日潮汐所造成的.      

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

C/E复合材料螺旋铣孔切屑形状与切削温度研究

碳纤维增强环氧树脂基体(C/E)复合材料具有优异的性能,广泛用于制造飞行器结构件。在加工C/E复合材料连接孔过程中容易出现分层、撕裂等加工缺陷,而切削温度过高是导致加工缺陷的主要原因之一。螺旋铣孔作为新的制孔技术,加工C/E复合材料时表现出许多优于传统钻孔的特点,受到广泛关注。本文采用专用加工装备开展了C/E复合材料制孔试验,利用红外热像仪实时监测切削温度,分析了螺旋铣孔加工参数对切削温度的影响规律。根据螺旋铣孔运动学规律和切削原理,从未变形切屑形状特点入手分析了螺旋铣孔切削温度的来源和影响因素。研究结果可对深入理解螺旋铣孔加工机理、制定合理的螺旋铣孔加工工艺提供依据。     

超声波铣床基于CATIA V5复合材料蜂窝件数控编程方法研究

本文针对超声五坐标数控加工设备的蜂窝数控加工方法及后处理特性进行分析,开展了在CATIAV5软件中相应编程方法和体系研究,开发了满足该设备数控编程需要的基于CATIAV5的资源库,制定了相应的编程方法规范。     

Pro／E二次开发技术在卫星结构设计中的应用

为解决卫星协同设计过程中总体、结构信息同步滞后问题,基于Pro／E软件进行二次开发,实现对总体与结构接口文件的自动解析;利用解析出来的接口数据,在模型上进行表阵列的自动创建,使总体设计模型的变更能够在结构设计模型中及时得到反映,从而实现“总体一结构”设计结果的快速同步。文章中开发的软件工具,在多颗卫星的研制过程中得到了应用。     

多臂空间机器人的视觉伺服与协调控制

针对多臂空间机器人自主目标抓捕任务,首先建立多臂空间机器人的运动模型和其与目标的相对运动模型,采用Kane方法建立多臂空间机器人的动力学模型;其次,研究基于视觉伺服的机械臂在线轨迹规划算法,并引入零反作用机动,消除机械臂运动对平台姿态的扰动;再次,在不使用零反作用机动功能时,分别使用基于角动量前馈补偿的协调控制算法和逆动力学方法设计了协调控制器,在机械臂运动时保持平台姿态和相对目标的位置。最后,开发了基于Matlab的仿真软件MASS（多臂空间机器人仿真）,仿真结果校验了上述方法的有效性。     

Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination −13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. −1.8°; mag. declination −15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. −11.1°; mag. declination −14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F₃ layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.     

An attempt to study long-term variation of sporadic E layers using neural networks

Strong positive correlation between sporadic E layers and the solar activity and the long-term declining trend of Es were found in this paper. Then the feed-forward back propagation neural networks (NNs) were used to simulate the long-term variation of Es at four stations and predict foEs yearly average values. The inputs used for NNs are the yearly mean values of foEs in the daytime of the past ten years and the yearly averaged data of solar 10.7 cm radio flux (F107) of the present year, and the output is the present yearly mean value of daytime foEs. The outputs of trained NNs have high correlation with the desired values and the foEs yearly mean values predicted by NNs have good agreement with the observed data. The results indicate that NNs can make full use of the observed data to simulate the long variation rule of Es. Also, the results confirm the effect of solar activity on Es.