基于改进半阈值算法的电容层析成像滑油监测方法研究

针对航空滑油检测过程中电容层析成像（Electrical Capacitance Tomography,ECT）存在的病态性和欠定性问题,将稀疏正则化中基于L1/2正则化的半阈值迭代算法应用到ECT图像重建,加入L2范数的惩罚项,构造新的泛函模型,并在迭代过程中设计一种新的约束项以优化解向量。仿真实验采用Comsol5.3搭建系统模型,Matlab2014a处理采集数据。实验结果表明,与Landweber迭代算法相比,改进算法成像误差降低37.33%,相关系数提升33.67%;与半阈值迭代算法相比,改进算法成像误差和相关系数分别降低12.31%和提升11.86%,图像误差降低至0.24、相关系数提升至0.92,且成像时间依然保持在0.06s。实际滑油监测的实验系统采用现场可编程门阵列（Field Programmable Gate Array,FPGA）直接数字频率生成模块生成数字量的正弦激励信号,通过D/A转化为正负交流信号对测量电极进行激励。实验结果表明,基于ECT系统的改进半阈值迭代算法可以满足航空发动机滑油监测的实时性和准确性的要求。     

旋翼干扰下的直升机尾桨气动噪声计算研究

针对旋翼干扰下的直升机尾桨气动噪声计算问题,将CFD方法与Farassat 1A(F1A)公式相结合,提出了一种适用于旋翼干扰下的尾桨气动噪声数值计算方法。首先,应用所提出的方法进行了噪声的算例验证,并与参考文献结果进行了对比;然后,着重针对悬停和前飞状态旋翼干扰下的尾桨噪声及气动特性进行了计算分析,并与孤立尾桨状态进行了对比。计算分析结果表明:悬停状态下,旋翼干扰下的尾桨气动噪声水平显著大于孤立尾桨;而在前飞状态,由于旋翼尾迹对尾桨桨盘平面产生更强的气动干扰,这一现象会更加明显;同时,在旋翼干扰作用下,尾桨噪声的主传播方向也会发生明显变化。     

Improving dUT1 from VLBI intensive sessions with GRAD gradients and ray-traced delays

Exact knowledge of the angle of Earth rotation UT1 with respect to coordinated time UTC, dUT1, is essential for all space geodetic techniques. The only technique which is capable of determining dUT1 is Very Long Baseline Interferometry (VLBI). So-called Intensive VLBI sessions are performed on a daily basis in order to provide dUT1. Due to the reduced geometry of Intensive sessions, there is however no possibility to estimate tropospheric gradients from the observations, which limits the accuracy of the resulting dUT1 significantly. This paper deals with introducing the information on azimuthal asymmetry from external sources, thus attempting to improve the dUT1 estimates. We use the discrete horizontal gradients GRAD and the empirical horizontal gradients GPT3 as well as ray-traced delays from the VieVS ray-tracer for this purpose, which can all be downloaded from the VMF server of TU Wien (http://vmf.geo.tuwien.ac.at). The results show that this strategy indeed improves the dUT1 estimates when compared to reference values from multi-station VLBI stations, namely by up to 15%. When converted to length-of-day (LOD), the estimates can be compared to LODs from global analyses of Global Navigation Satellite Systems (GNSS). Here, the improvement amounts to up to 7% compared to neglecting a priori information on azimuthal asymmetry.     

X射线脉冲星动态信号处理方法研究

X射线脉冲星导航是一种基于X射线脉冲星观测的新型天文自主导航方法,脉冲星在轨动态信号处理技术一直是脉冲星导航的难点和重点,特别是低轨高动态条件下的信号处理比高轨低动态情况更加困难。针对动态信号处理中实测数据信噪比偏低的问题,提出了一种适用于低轨高动态情况的脉冲星动态信号处理方法,并对其原理进行了分析,建立了相关数学模型,并使用HXMT卫星和XPNAV-1卫星的实测数据验证了算法性能,实验结果表明:该方法有效提高了导航观测量处理精度。     

Involvement of nitric oxide in the mechanism of biochemical alterations induced by simulated microgravity in Microcystis aeruginosa

Simulated microgravity (SMG) can inhibit proliferation and enhance microcystin production of Microcystis aeruginosa. We investigated the role of nitric oxide (NO) in regulating the SMG induced changes of proliferation, photochemical system II photochemical activity, pigment, soluble protein and microcystin production in M. aeruginosa. M. aeruginosa was exposed to 0.1 mM sodium nitroprusside (SNP, NO donor) or 0.02 mM 2-(4-carboxyphenyl)-4, 4, 5, 5-tetramethylimidazoline-1-oxyl-3-oxide (c-PTIO, NO scavenger) alone or in combination with SMG for 48 h. SMG and SNP inhibited the growth of M. aeruginosa while c-PTIO had no effect on cell number. As to yield, the negative effect of SMG was augmented by SNP and suppressed by c-PTIO. The intracellular concentrations of chlorophyll a, carotenoid, phycocyanin, soluble protein and microcystin were increased by SMG after 48 h. The effects of SMG on these metabolic processes could be enhanced by SNP and be partly eliminated by c-PTIO. Moreover, SNP and c-PTIO only functioned in these biochemical processes under SMG, unlike in the regulation of cell proliferation and yield. These results showed that the effects of SMG could be enhanced by adding exogenous NO and be mitigated by scavenging endogenous NO, revealing the involvement of NO in the changes in biochemistry processes induced by SMG in M. aeruginosa.     

Space Flight Validation of Design and Engineering of the ZDPS-1A Pico-satellite

The ZDPS-1A pico-satellites are the first satellites in China within the 1-10 kg mass range that are successfully operated on orbit. Unlike common pico-satellites, they are designed to be "larger but stronger" with more powerful platforms and unique payloads so as to bear a better promise for real applications. Through their space flight mission, the functionality and performance of the two flight models are tested on orbit and validated to be mostly normal and in consistency with design and ground tests with only several inconforming occasions. Moreover, they have worked properly on orbit for one year so far, well exceeding their life expectancy of three months. Therefore, the space flight mission has reached all its goals, and verified that the design concept and the engineering process of the picosatellites are sufficient in allowing them the desired functionality and performance in, and the adaption to the launch procedure and the low-Earth orbit space environment. In the foreseeable future, the platform together with the design concept and the engineering process of the pico-satellites are expected to be applied to more complicated real space applications.     

深基坑支护技术的质量控制——以预应力锚杆和钻孔灌注桩组合为例

分析采用预应力锚杆和钻孔灌注桩组合深基坑支护技术,在施工过程中存在的缺陷类型和形成原因,指出为了确保支护结构施工质量,制订相应的改进措施,经过实践验证,表明了措施的安全性及有效性。     

会议筹备的0-1整数规划

在举行大型会议时,组委会需对宾馆预定、会议室安排,客车租用这三方面问题做出合理的安排,既要满足与会代表的要求,又要使租用会议室及租车费用尽可能少。针对此问题,建立了多目标规划模型,利用分层序列法,把目标按其重要性的序列:宾馆预定,会议室安排,客车租用依次求解,在前一目标最优解集内求下一个目标最优解,并利用LINGO软件求解。     

提高静压气浮陀螺加表K0、K1项精度的工艺研究

本文通过对影响静压气浮陀螺加表K0、K1项精度的因素分析,从加表及其重要组件的工作原理、结构特点、工艺过程等方面展开研究,总结出经过工艺试验及生产过程验证提高加表K0、K1项精度的关键技术,提高了加表验收合格率。     

用CST软件仿真替代部分卫星RM测试的可行性研究

环境减灾-1A、1B卫星采用CST-MWS软件完成了RM星仿真分析,快、好、省地完成了天线分系统设计验证任务。文章通过某卫星全向天线CST-MWS软件分析结果与RM测试结果的比较,表明软件分析结果的准确性满足RM验证的要求,验证了环境减灾-1A、1B卫星RM星仿真结果的正确性。进而也论证了软件仿真替代部分RM测试的可行性。