Nonlinear dynamic modeling of a helicopter planetary gear train for carrier plate crack fault diagnosis

Planetary gear train plays a significant role in a helicopter operation and its health is of great importance for the flight safety of the helicopter. This paper investigates the effects of a planet carrier plate crack on the dynamic characteristics of a planetary gear train, and thus finds an effec-tive method to diagnose crack fault. A dynamic model is developed to analyze the torsional vibra-tion of a planetary gear train with a cracked planet carrier plate. The model takes into consideration nonlinear factors such as the time-varying meshing stiffness, gear backlash and viscous damping. Investigation of the deformation of the cracked carrier plate under static stress is performed in order to simulate the dynamic effects of the planet carrier crack on the angular displacement of car-rier posts. Validation shows good accuracy of the developed dynamic model in predicting dynamic characteristics of a planetary gear train. Fault features extracted from predictions of the model reveal the correspondence between vibration characteristic and the conditions (length and position) of a planet carrier crack clearly.     

民用航空发动机型号审定概念设计阶段风险模型

为了在审定项目概念设计阶段识别潜在风险并规划处理措施以提高审定效率,通过综合条款分类统计、符合性方法及实施风险、技术要点解析等方法建立了典型民用航空发动机概念设计阶段工作模型,并开发了条款工作状态信息表。模型在某型民用航空发动机型号审定的实施识别了278项潜在风险,并针对典型结构完整性条款从要求确定到设计实现各个过程的潜在风险进行了详细分析,验证了模型的有效性。     

0.3 m低温风洞液氮供给系统研制

基于系统级的一维热流体模拟分析,建立了适用于研究分析0.3 m低温风洞液氮供给系统的数学模型,并开展了系统漏热、两相流及缓冲罐中液氮容积等流体动力学分析;在系统现有控制策略及试验数据的基础上,基于该数学模型开展了系统压力动态响应分析,获得了在阀门动态调节过程中管网压力的瞬态响应,计算结果与试验值的总体误差控制在10%以内。喷射压力一致化改造避免了阀间干扰,添加的回流管道消除了供给末端的两相流现象,使喷射压力控制精度达到1.1%,调节时间减少到23 s,实现了风洞总温快速安全调节和精确控制。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

发射脉冲载波泄漏抑制研究与实现

对发射端采用双平衡正交调制器产生线性调频造成载波泄漏的原因进行了详细分析,提出了采用直接数字合成(DDS)技术产生发射端线性调频信号的实现方法,从而很好地解决了载波泄漏的问题,并给出了试验结果。     

镁铝富燃料推进剂燃烧残渣影响因素理论分析

用最小自由能法计算了镁铝富燃料推进剂一次燃烧室产物的成分,分析了凝聚相C、Mg和A l产物含量的变化对燃烧残渣的影响;主要探讨了AP含量、Mg/A l比例、HTPB粘合剂含量、燃烧室压强对凝聚相C、Mg、A l燃烧产物含量的影响。计算结果表明,增加AP含量、设计Mg/A l比小于3/5、减小HTPB粘合剂含量、降低燃烧室压强均能减少凝聚相产物含量,有利于降低燃烧残渣。燃气发生器实验结果表明,Mg/A l比例对燃烧残渣影响的实验数据与理论分析一致。     

基于时频二维估计的卫星导航失锁快速重定位技术

卫星导航接收机在天线受到遮挡或者弱信号环境中易出现信号失锁现象,信号恢复后的重定位时间成为接收机的一项重要性能指标。提出一种基于时频二维估计、适用于中低动态应用场景的失锁快速重定位技术,利用信号失锁前测量的载波多普勒频率和码相位等信息对失锁后的多普勒频率及码相位进行估计,信号恢复后直接启用信号跟踪,无需进行位同步和帧同步,即可实现快速重定位。对该技术进行工程实现及试验验证,结果表明信号输入功率高于–145dBm(积分时间为10ms)、失锁时间小于60s时,接收机重定位时间在1s以内。     

四相横向磁通永磁电机的三电平滞环电流控制

以新型四相横向磁通永磁电机为研究对象,利用MATLAB/Simulink软件平台以及Simpower System工具箱,对闭环控制系统进行了研究。在传统双闭环调速控制基础上,为滞环电流控制环引入零电平,将滞环分为上滞环和下滞环。综合考虑开关频率与电流THD确定合适的滞环环宽,并根据偏差电流值与滞环环宽比较值得到逆变器控制信号。通过仿真得到各种工况下的电机运行数据,说明该控制方法能够对四相横向磁通永磁电机进行有效控制。     

预旋系统稳态和非稳态计算对比研究

针对预旋系统由于旋转引起流场和温度场参数周期性瞬态变化的问题,分别采用滑移网格的瞬态法和固定转子相位的稳态法进行数值求解,并在稳态计算中通过改变转子相位来近似模拟非稳态问题的时空变化特性。通过稳态空间平均结果与非稳态时均结果的对比,以期为预旋系统非稳态问题的低成本求解提供方法依据。结果表明：稳态计算结果与非稳态计算结果相比,周期性波动频率一致,接受孔进口处,稳态计算的压力波动幅度小39%左右,温度波动幅度小15%左右;多个相位的稳态空间平均结果与非稳态时均结果相比,压力高0.2%,温度低0.1%;采用多个计算周期数与单个周期的非稳态计算结果差异微小。当采用喷嘴出口气流中心正对接受孔迎风面前缘的转子相位时,稳态计算结果与非稳态计算时均结果最接近。     

基于Lamb波相控阵和图像增强方法的损伤监测

利用Lamb波和超声相控阵理论对结构进行损伤监测。选择合适的低频窄带激励信号,产生单一模式Lamb波,结合超声相控阵技术对结构进行多方位监测。针对原始损伤图像不完美的问题,研究基于点运算的对比度增强方法,改善图像质量,提高图像的可识别度和分辨率。在复合材料板结构和铝板结构中针对不同损伤类型的实验研究证明,运用图像增强技术后的损伤图像表征清晰、识别度高。