双重稀疏保持投影(英文)

稀疏保持投影(Sparsity preserving projection,SPP)是一种新型的基于图的降维方法,近年来被成功应用于人脸识别。SPP基于数据的稀疏重建关系建图,从而包含自然的判别信息。然而,经SPP变换后,新的特征是所有原始特征的线性组合,因此很难解释其降维结果。为此,提出了一种新的降维方法——双重稀疏保持投影(Dual-sparsity preserving projection,DSPP),通过进一步对SPP的投影方向施加稀疏约束,希望获得投影方向的稀疏解。具体地,该方法把SPP中投影函数的计算转化为一个回归类优化问题,然后借助L1正则化回归技术获得稀疏投影向量。在人脸数据上的实验结果表明了该算法的有效性。     

大连机场一次罕见的连续四天大雾低云过程分析

本文利用常规天气图、探空图和三维中尺度模式,对大连机场2011年6月29日到7月3日出现的连续4天的大雾低云天气进行分析,发现此次大雾低云过程发生同副热带高压的位置和强度变化密不可分:副热带高压中高层的下沉逆温对大雾低云天气的低层稳定层的产生和维持起到重要作用;同时它的西进北抬和东撤南退直接导致大连机场上游天气系统三次槽线东移,进而影响本场。近地面层的水汽辐合和弱冷暖气流交汇为大雾低云天气得以维持提供良好的水汽条件。     

常规闭口风洞相阵列气动声学试验

传统气动声学研究观点认为,精确的声学测量要求风洞背景噪声和洞壁反射足够低,传声器测量结果有足够高的信噪比,这是大多数风洞无法达到的要求.近些年,基于声纳和雷达技术发展起来的麦克风相阵列技术可以通过增加阵列的传声器数目从而大幅提高声学测量的信噪比,具有噪声源研究和定位能力,并被成功地应用于非声学固壁风洞噪声源测量和噪声物理机制研究.作者基于相阵列波束生成频域算法研制出常规闭口风洞相阵列系统及相关技术,在FD-09风洞尝试进行了相阵列校准试验和某民机噪声测量试验.结果表明:相阵列技术能够准确捕捉到真实的校准声源,并从技术上验证了相阵列系统在常规闭口风洞测量气动噪声是有效的.     

测量数据中色噪声处理方法探讨

针对经纬仪对高速运动目标测量数据的色噪声处理问题进行了分析探讨。介绍了目前对经纬仪测量数据随机误差进行处理的常用方法,指出了该方法对色噪声处理存在的问题,在对测量序列相关性采用差分方法进行分析的基础上,提出了对色噪声数据采用的两种处理策略——非相关转换法和相关数据平滑法,详细介绍了两种处理策略的计算过程和方法,并通过实测数据的处理实例,验证了所提出处理策略的有效性和合理性,最后对两种方法的特点进行了比较分析。     

航天用太阳电池地面标定测试装置研究

传统的标准太阳电池标定方法分为高空标定与地面标定,地面标定方法已纳入国际标准。地面标定由于操作简便、标定结果较为精准目前被广泛应用。太阳电池标定结果准确与否对航天器电源系统姿态敏感期、地面环境模拟的设计具有重要意义。本文对太阳电池地面标定方法展开研究,根据国家标准中地面标定方法原理研制了便携式、高准确度的地面标定测试设备,包括准直孔、太阳电池托盘、太阳跟踪器等标定装置,使地面标定过程简易化,对航天用太阳电池地面标定有着重要意义。     

地外二氧化碳转化利用技术研究现状与展望

为有效解决未来长期载人地外生存面临的物资供给等关键问题,获得更高的氧回收率、能量转化效率和更低的应用成本,亟须发展更高效的地外二氧化碳转化利用技术。文章总结了地外二氧化碳利用的发展现状并分析了近期的研究进展,发现不同技术之间差异大,在航天应用过程中,需充分考虑地外环境限制因素,以选用更合适的技术。空间站上已搭载的Sabatier装置和火星车上的MOXIE装置初步实现了地外二氧化碳还原。以“地外人工光合成”为代表的常温二氧化碳转化技术可为地外环控生保提供新路线。其不仅能够实现地外氧气供给,还可获得甲酸、乙烯和甲烷等有机分子作为燃料或生物转化原料。随着相关基础研究的不断发展,有望实现二氧化碳的高效转化和高附加值有机物、甚至碳糖食物的生产。地外二氧化碳转化利用技术的发展,将实现地外密闭环境下的废弃资源利用与物质循环,降低载人空间站、载人深空飞船的物资供应需求,也将为原位资源利用火星大气中的二氧化碳提供创新思路,以支撑未来可承受、可持续的地外生存任务。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

First results from the LUCID-Timepix spacecraft payload onboard the TechDemoSat-1 satellite in Low Earth Orbit

The Langton Ultimate Cosmic ray Intensity Detector (LUCID) is a payload onboard the satellite TechDemoSat-1, used to study the radiation environment in Low Earth Orbit ($～$635?km). LUCID operated from 2014 to 2017, collecting over 2.1 million frames of radiation data from its five Timepix detectors on board. LUCID is one of the first uses of the Timepix detector technology in open space, with the data providing useful insight into the performance of this technology in new environments. It provides high-sensitivity imaging measurements of the mixed radiation field, with a wide dynamic range in terms of spectral response, particle type and direction. The data has been analysed using computing resources provided by GridPP, with a new machine learning algorithm that uses the Tensorflow framework. This algorithm provides a new approach to processing Medipix data, using a training set of human labelled tracks, providing greater particle classification accuracy than other algorithms. For managing the LUCID data, we have developed an online platform called Timepix Analysis Platform at School (TAPAS). This provides a swift and simple way for users to analyse data that they collect using Timepix detectors from both LUCID and other experiments. We also present some possible future uses of the LUCID data and Medipix detectors in space.     

对数——反对数交直流转换器的频带分析

本文从对数——反对数真有效值交直流转换器原理出发,指出输入对数电路中的运算放大器频宽是决定整个转换器频宽的重要因素,并从理论上推导出转换器的频宽公式。这一工作对高精度数字万用表的研制具有重要意义。     

导航解算中的有色噪声及其协方差矩阵自适应拟合

使用Kalman滤波进行动态导航定位解算需要涉及函数模型和随机模型, 而在实际应用中, 精确的函数模型和随机模型很难直接给出, 因此, 动态Kalman滤波的精度和可靠性将会受到函数模型误差和随机模型误差的影响. 在假设观测噪声和动力学模型噪声主要是具有一阶自相关特性的有色噪声的基础上, 提出了一种基于移动窗口的有色噪声函数模型和随机模型的自适应拟合法. 给出了计算有色噪声估值和噪声协方差矩阵的表达式, 并利用实测数据验证了模型及算法的可行性和实用性. 计算结果表明, 该算法能有效抵制有色噪声对导航滤波结果的影响.