利用改正数信息的北斗三号实时精密单点定位及性能分析

北斗三号全球卫星导航系统已正式建成并开通服务。为了利用实时改正数信息系统地揭示北斗三号精密单点定位性能，并为用户提供理论依据和应用参考，首先解算了卫星实时精密轨道、钟差及其改正数，分析了其精度。然后基于实时改正数信息，利用监测站广播星历和观测数据，分别进行了双频静态、双频仿动态、单频静态和单频仿动态仿实时精密单点定位，以评估其性能。结果表明：北斗三号MEO卫星实时轨道和钟差精度均值分别约为12cm和0.2ns，满足实时精密单点定位需求。静态实时精密单点定位精度优于动态，双频优于单频，均可达到分米级。对于定位收敛时间，双频静态最短，约为40min；双频动态和单频静态均约为85min；单频动态最长，约为120min。     

基于数字滤波的B-样条插值法在图像旋转中的应用

提出一种基于无限脉冲响应和有限脉冲响应数字滤波技术的快速 B-样条插值法 ,并将其应用于实时图像旋转处理中。为了优化旋转后的图像质量 ,本文采用 3次 B-样条对图像旋转后的像素点灰度值进行插值运算。另外 ,通过对传统图像旋转矩阵的分解 ,将图像在二维空间中的旋转运算分解成为三步在一维空间内平移运算 ,使插值运算在一维空间中完成 ,从而简化了图像旋转数据处理中的插值运算。最后 ,还提出了一种以硬件方法完成高阶图像插值运算实现图像旋转的新方法 ,并针对 2 5 6灰度级 ,2 5 6× 2 5 6像素的图像 ,设计出一个以 FPGA为核心的实时、高质量的硬件图像旋转系统。     

波音737NG飞机平尾内梁下蒙皮裂纹的修理

介绍了水平安定面内梁下蒙皮裂纹的成因以及发现裂纹后的修理方法，结合定检维修经验对裂纹损伤修理方案和经常出现的问题进行了分析总结，并给出了修理工期控制的建议。     

基于B/S的空管自动化综合航迹显示系统的设计与实现

提出一种基于B/S的综合航迹显示系统,该系统通过解析空管自动化系统的综合航迹实现了在IE浏览器上对区域内的航迹的监视。系统实现主要包括三部分:一是综合航迹的接收,主要通过对同步串口卡的数据读取;二是对数据的数据库处理;三是对综合航迹的显示。系统实现了对MH4008003类数据的解析以及对空管自动化系统的地图解析,并且在IE界面上提供了航迹态势显示以及用户交互接口。     

Atmospheric reentry hemisphere prediction for prograde orbits using logical disjunction

A unique logic-based algorithm for atmospheric reentry hemisphere prediction is presented for spacecraft in low-eccentricity, prograde low Earth orbits at altitudes of 300 km and lower. Using two-line element (TLE) data for initial orbit conditions, coupled with coarse estimates for spacecraft aerodynamic characteristics, the algorithm relies on logical disjunction operations based on a dual analysis of histogram and two-weighted Gaussian probability density function (PDF) fits of predicted reentry latitude data. The algorithm requires the execution of a series of parametric simulations to determine the reentry hemisphere for variations in spacecraft aerodynamic coefficients and drag reference area. When implemented, the algorithm yields accurate hemisphere predictions on average 15 days from reentry as demonstrated by historical reentry cases from 1979 to 2018. All reentry cases were selected to demonstrate the algorithm’s ability to deliver accurate reentry hemisphere predictions for spacecraft with varying physical size and mass, and reentering during different periods of solar cycle activity.     

Contamination of short GRBs by giant magnetar flares: Significance of downward revision in distance to SGR 1806–20

We highlight how the downward revision in the distance to the star cluster associated with SGR 1806–20 by Bibby et al. (2008) reconciles the apparent low contamination of BATSE short GRBs by intense flares from extragalactic magnetars without recourse to modifying the frequency of one such flare per 30 years per Milky Way galaxy. We also discuss the variety in progenitor initial masses of magnetars based upon cluster ages, ranging from ∼50 M_⊙ for SGR 1806–20 and AXP CXOU J164710.2–455216 in Westerlund 1 to ∼17 M_⊙ for SGR 1900+14 according to Davies et al. (2009) and presumably also 1E 1841–045 if it originated from one of the massive RSG clusters #2 or #3.     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

基于CCSDS标准的航天器上行遥控链路 协议体系与可靠性技术

针对航天测控领域中上行遥控业务的协议体系选择与可靠性设计问题,在对我国现行国军标技术指标要求与现有航天测控系统天地基遥控技术特点进行归纳梳理的基础上,基于空间段信息传输无线链路特点与CCSDS(Consultative Committee for Space Data Systems,空间数据系统咨询委员会)标准规范,研究给出了适用于我国航天测控任务的空间段遥控协议体系与可靠性措施,利用梳理统计方法对上行遥控体制进行了数学建模分析,并与CCSDS给出的应用算例进行了对比分析.分析结果表明,所涉及的上行遥控体制与CCSDS标准规范的工作效能基本相当,能够满足我国航天任务上行遥控任务使用需求.     

聚氨酯增韧改性 PISOX 树脂及其复合材料的性能

利用MDI与PTMG-2000制备聚氨酯预聚体,对聚(异氰脲酸酯-噁唑烷酮)树脂(PISOX)进行增韧改性:考察不同I/E、不同预聚体添加量的树脂浇铸体力学性能的变化;并对最优配方进行复合材料力学性能测试和DMTA测试,比较改性前后复合材料力学性能和耐热性能的变化;利用SEM观察改性前后微观形态的变化,推测增韧机理。结果表明,I/E=1.8、添加15%预聚体时树脂浇铸体综合力学性能最优,弯曲强度、弯曲模量、冲击强度分别为60.92 MPa、2 295 MPa、6.40 k J/m2;利用该基体制备复合材料,具有比未改性体系更优异的力学性能和界面性能,且聚氨酯预聚体的引入对树脂在高温下的耐热性能没有明显影响,其玻璃化转变温度均在258℃左右;对比改性前后体系固化物的微观结构,改性后的体系呈两相结构,橡胶相起到吸收冲击能和终止裂纹的作用,有效地提高了材料的韧性。