热暴露对B/Al复合材料性能的影响

对经300℃、500℃高温热暴露的B／Al（LF6）复合材料的力学性能进行了研究，实验结果表明材料在300℃下热暴露时，性能下降速度较慢，100h后强度保留率约为76％，延伸率保留率为74％。而在500℃下热暴露时，5h以上强度就有明显降低。高温长时间热暴露后复合材料的断裂也从积累型转变为典型的非累积型断裂。通过透射电镜（TEM）及扫描电镜（SEM）对固态热压制造态和主温热暴露的界面状况进行了分析，认为界面反应是造成B／Al复合材料力学性能下降的主要原因。     

测量机连续扫描控制系统设计

利用UCC1控制器作为核心,构建具有三维空间连续扫描功能的测量机控制系统的方法,并简要介绍了UCC1控制器的功能及控制系统硬件电路的设计。     

从价格学原理看民航国内票价管理体制改革

从价格学原理出发,阐述了市场经济体制下政府在价格管理方面的职能,分析了中国民航国内票价管理体制方面存在的问题以及产生这些问题的原因,介绍了国内票价管理体制改革的基本思路,提出了解决问题的政策和配套措施。     

基于MOTOROLA D15手机模块的无线发送模块的设计

应用Motorola D15手机模块设计GPS系统中的无线发射部分，在硬件设计部分介绍了手机模块与微处理器的连接关系，而在软件部分介绍了AT指令、编码过程和发送过程。     

网上考试系统的设计与实现

本文讨论了一种新的考试方法———网上考试 ,并讨论了一种基于B/S系统实现网上考试的思路和设计方法 ,并对实现网上考试系统的部分关键技术进行了分析     

飞机座舱有机玻璃钻（扩）孔工艺的研究

 以自然冷却无需使用压缩空气和冷却剂的一次钻（扩）孔,作为飞机座舱玻璃孔的工艺。孔的质量优于现行工艺的成品孔。钻（扩）孔后无需退火以消除加工应力。该工艺适用于定向和不定向有机玻璃,粘涤纶钢的有机玻璃组合件。     

应用ART1神经网络仿真车间分组

阐述了ART1神经网络在制造单元设计过程中形成零件族的基本方法,并在基于MATLAB的软件平台上,利用其神经网络工具箱对生产过程中的实际情况进行了仿真和应用。     

Expectations for Infrared Spectroscopy of 9P/Tempel 1 from Deep Impact

The science payload on the Deep Impact mission includes a 1.05–4.8 μm infrared spectrometer with a spectral resolution ranging from R∼200–900. The Deep Impact IR spectrometer was designed to optimize, within engineering and cost constraints, observations of the dust, gas, and nucleus of 9P/Tempel 1. The wavelength range includes absorption and emission features from ices, silicates, organics, and many gases that are known to be, or anticipated to be, present on comets. The expected data will provide measurements at previously unseen spatial resolution before, during, and after our cratering experiment at the comet 9P/Tempel 1. This article explores the unique aspects of the Deep Impact IR spectrometer experiment, presents a range of expectations for spectral data of 9P/Tempel 1, and summarizes the specific science objectives at each phase of the mission.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

应用声发射技术实时监测某型机防扭支架疲劳试验裂纹

随着声发射技术的发展,声发射技术在工程无损检测上的运用日益广泛。本文对声发射技术的应用现状、基本理论及在直升机某型机防扭支架疲劳试验裂纹监测中的应用进行了介绍。希望通过应用声发射技术,能及时捕捉疲劳裂纹形成和扩展的过程,给判定疲劳试验件是否破坏带来更准确、客观的依据,从而能为直升机动部件和结构件的准确定寿提供一种科学的辅助手段。