MC-LRF based pose measurement system for shipborne aircraft automatic landing

Due to the portability and anti-interference ability, vision-based shipborne aircraft automatic landing systems have attracted the attention of researchers. In this paper, a Monocular Camera and Laser Range Finder (MC-LRF)-based pose measurement system is designed for shipborne aircraft automatic landing. First, the system represents the target ship using a set of sparse landmarks, and a two-stage model is adopted to detect landmarks on the target ship. The rough 6D pose is measured by solving a Perspective-n-Point problem. Then, once the rough pose is measured, a region-based pose refinement is used to continuously track the 6D pose in the subsequent image sequences. To address the low accuracy of monocular pose measurement in the depth direction, the designed system adopts a laser range finder to obtain an accurate range value. The measured rough pose is iteratively optimized using the accurate range measurement. Experimental results on synthetic and real images show that the system achieves robust and precise pose measurement of the target ship during automatic landing. The measurement means error is within 0.4° in rotation, and 0.2% in translation, meeting the requirements for automatic fixed-wing aircraft landing.Received 5 July 2022; revised 19 August 2022; accepted 27 September 2022.     

遥外测综合测量系统弹道计算新方法

遥外测综合测量系统在定位精度上有其局限性 ,布站不能接近同一平面 ,必须布置一个空中站来改善布站几何 ,否则容易引起定位无解或精度差 ,但布置空中站在工程上很难实现 ,且代价太高。针对这个问题 ,提出一种新的弹道计算方法 ,可以有效弥补上述局限性 ,取消空中站 ,并且显著提高定位精度。     

间接Legendre伪谱法的欠驱动航天器姿态运动轨迹跟踪

针对仅带有两组喷气推力器的非轴对称欠驱动刚性航天器,提出一种基于间接Legendre伪谱法的姿态运动轨迹跟踪控制算法。首先采用Legendre伪谱法(LPM)离线规划出系统的最短时间姿态机动参考轨迹。接着将实际运行轨迹与参考轨迹之间的偏差作为变量,根据Pontryagin极小值原理必要条件把系统姿态运动跟踪问题转化为一个两点边值问题(TPBVP)。最后采用 Legendre-Gauss-Lobatto(LGL)点将此两点边值问题离散转化为一个线性方程组来求解,避免了对传统Riccati微分方程的积分运算。数值仿真校验了本文基于间接Legendre伪谱法的姿态运动轨迹跟踪控制算法的有效性。     

翼伞系统在未知风场中的归航控制

翼伞系统在未知风场中执行归航任务时,需获得风场的大小和方向信息,以便在归航过程中利用或者消除风场的影响。为实现翼伞系统在未知风场中精确归航与逆风雀降着陆,首先提出一种利用全球定位系统(GPS)定位数据和最小二乘法在线辨识风向和风速的方法,然后将风场中平均风的影响在轨迹规划中予以考虑,设计分段归航路径;将突风作为外界干扰,在轨迹跟踪过程中由线性自抗扰控制(LADRC)器进行观测和补偿。最后通过仿真实验验证了本文所提出的归航控制方法对于提高翼伞系统在未知风场中的归航精度和抗风能力有重要意义。     

A forced ignition probability analysis method using kernel formation analysis with turbulent transport and Lagrangian flame particle tracking

A forced ignition probability analysis method is developed for turbulent combustion, in which kernel formation is analyzed with local kernel formation criteria, and flame propagation and stabilization are simulated with Lagrangian flame particle tracking. For kernel formation, the effect of turbulent scalar transport on flammability is modelled through the incorporation of turbulence-induced diffusion in a spherically outwardly propagating flame kernel model. The dependence of flammability limits on turbulent intensities is tabulated and serves as the flammability criterion for kernel formation. For Lagrangian flame particle tracking, flame particles are tracked in a structured grid with flow fields being interpolated from a Computational Fluid Dynamics (CFD) solution. The particle velocity follows a Langevin model consisting of a linear drift and an isotropic diffusion term. The Karlovitz number is employed for the extinction criterion, which compares chemical and turbulent timescales. The integration of the above two-step analysis approach with non-reacting CFD is achieved through a general interpolation interface suitable for general unstructured CFD grids. The method is demonstrated for a methane/air bluff-body flame, in which flow and fuel/air mixing characteristics are extracted from a non-reacting simulation. Results show that the computed ignition probability map agrees qualitatively with experimental results. A reduction of the ignition probability in the recirculation zone and a high ignition probability on the shear layer of the recirculation zone near the mean stoichiometric surface are well captured. The tools can facilitate optimization of spark placement and offer insights into ignition processes.     

目标被动定位与跟踪技术

基于精确制导技术的需要 ,本文研究了被动方式下的目标定位与跟踪技术 ,对其研究背景、研究意义、研究现状以及被动定位与跟踪问题的分类进行了详细的阐述 ,并在此基础上指出了尚待解决的一些问题。最后 ,对目标被动定位与跟踪技术的发展方向做了展望     

基于混合滤波的无线传感器网络融合跟踪方法

 针对无线传感器网络(WSN)中的多传感器融合目标跟踪,提出一种混合滤波算法,称为无迹混合集中式粒子滤波(UM CPF)。该算法使用了一个混合的粒子传播方案。在使用集中式粒子滤波(CPF)对WSN中的节点测量信息进行融合时,粒子滤波器中的一部分粒子使用从无迹变换(UT)获得的高斯分布作为建议分布进行粒子传播,而剩余的另一部分粒子则简单地使用状态转移先验分布进行粒子传播。WSN中的融合跟踪仿真结果表明,和纯粒子滤波算法CPF相比,在仿真速率相当的情况下,混合滤波算法明显提高了跟踪精度和稳定性。     

激光跟踪仪在全机水平测量的应用

简要介绍了传统飞机全机水平测量方法的优缺点,以及激光跟踪仪系统(Laser Tracker System)测量的基本原理,并对水平测量的可行性进行了讨论。     

GPS软件接收机的捕获与跟踪算法

研究了GPS软件接收机的捕获与跟踪算法。分析了时域串行滑动相关捕获算法和频域基于FFT的并行相关捕获算法,设计了适合GPS软件接收机的并行算法,实现了对空中可见卫星的捕获。针对GPS信号的特点,设计了基于DLL与PLL相结合方法的GPS跟踪算法。利用实测中频信号对上述捕获与跟踪算法进行了验证分析,测试结果表明,基于FFT的并行相关捕获算法能够有效增强软件接收机的捕获能力,采用DLL与PLL相结合的方法能够实现对GPS信号的有效跟踪。     

惯导速度辅助下GPS接收机码环的噪声响应和动态跟踪性能分析

 本文推导了C/A码信号相干和非相干接收的GPS接收机码环的动力学方程,分析了码环的噪声响应和动态跟踪性能对码环带宽的矛盾要求,并提出了解决矛盾的方法:惯导速度辅助。分析结果表明:窄带宽码环经精度为1nmile/h的惯导系统速度辅助后,动态跟踪误差为无辅助时的1/1000,接收机将兼有抗强干扰和跟踪高动态的性能。