Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

具有运动部件的预警卫星姿态前馈复合控制

研究了预警卫星在扫描相机干扰作用下的姿态稳定控制问题。在反作用轮输出力矩饱和限制条件下 ,基于动量守恒定理 ,设计了用于补偿扫描相机干扰作用的前馈控制器 ,从而提出预警卫星姿态的反馈 -前馈复合控制方法。仿真结果表明该方法能够较有效地抑制由于扫描运动引起的卫星姿态扰动 ,具有设计简单、易于实现等特点。     

基于预测零控脱靶量的拦截器中制导段导引

针对三维空间内的高速飞行目标,提出了一种基于预测零控脱靶量的中制导段导引方法。建立了拦截器与目标的相对运动关系模型,分析了确定修正轨道的约束条件,并在此基础上推导出修正轨道根数的计算方法。同时根据待增速度给出了推力定向和推力发动机工作时长的确定方法。仿真结果表明,该方法能有效实现拦截器中制导段的制导控制。     

基于扩张状态观测器的动态逆过失速机动飞行控制

针对飞机过失速机动飞行控制问题,提出了一种将动态逆与扩张状态观测器相结合进行扰动估计补偿的新思路。根据时标分离原则将飞机状态分为快变量和慢变量,并分别设计了两个回路的动态逆控制器。在快慢回路分别引入扩张状态观测器对系统的不确定部分进行估计补偿,抵消不确定部分对系统动态特性的影响。最后对控制律进行了过失速机动仿真。结果表明,在存在较大参数摄动情况下,设计的控制律能控制飞机跟踪控制指令,表现出良好的稳定性和鲁棒性。     

机载单站只测向定位最优机动研究

概述了机载单站只测向定位最优机动求解算法，研究了基于最大方位角变化率准则下的观测机机动轨迹，得到理论上的最优定位机动，并结合实际运用，分析出两种近似最优的机动：“一”形（直线形）机动和S形机动，通过仿真，验证了这2种机动方式在一定条件下可以等效于最优机动，具有良好的定位效果。     

Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

含有不平衡飞轮的卫星精确动力学模型研究

针对含不平衡飞轮的卫星动力学模型,给出了不平衡飞轮的转动惯量矩阵。用多刚体建模方法,建立了综合的完整姿态动力学分析模型,提出了质心位置的计算方法。通过飞轮系统的完整精确模型,将飞轮扰动对三轴姿态稳定卫星的影响反映至滚转一俯仰一偏航三轴姿态。Matlab／Simulink环境中仿真验证了该系统角动量为常值。分析了不平衡飞轮对卫星姿态的影响,并解释了模型的应用。研究表明飞轮扰动影响不可忽略,精确的动力学模型对未来航天器的应用有重要意义。     

单天基平台测向的空间非合作目标跟踪

针对仅含角度测量信息的单个天基平台可观测性较弱的问题,提出了一种含脉冲机动检测的空间非合作目标跟踪算法,并设计了非合作目标实时跟踪数据处理流程.该算法利用抗差估计技术和UKF（Unscented Kalman Filter,无迹卡尔曼滤波）算法构造目标跟踪滤波器,并综合残差多项式拟合和新息分布特征等方法实现目标机动检测,在天基平台观测信息类型有限和观测几何较差的情况下,可以同时排除孤立野值和成片测量野值的影响,实现非合作机动目标的连续稳定跟踪.数值实验验证了算法的可行性和有效性,也表明了跟踪精度和可靠性与测量精度密切相关.     

一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

飞行器数字姿控系统数字校正滤波器参数优化设计

本文提出一种数字校正滤波器Z域最佳逼进设计算法,根据数字滤波器期望特性,在Z平面上直接优化设计滤波器参数,这种算法对任何形式的数字校正滤波器(递归式和非递归式)均是适用的。