Spinning solar sail orbit steering via spin rate control

The orbit of a solar sail can be controlled by changing the attitude of the spacecraft. In this study, we consider the spinning solar power sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun), which is managed by Japan Aerospace Exploration Agency (JAXA). The IKAROS attitude, i.e., the direction of its spin-axis, is nominally controlled by the rhumb-line control method. By utilizing the solar radiation torque, however, we are able to change the direction of the spin-axis by only controlling its spin rate. With this spin rate control, we can also control indirectly the solar sail’s trajectory. The main objective of this study is to construct the orbit control strategy of the solar sail via the spin-rate control method. We evaluate this strategy in terms of its propellant consumption compared to the rhumb-line control method. Finally, we present the actual flight attitude data of IKAROS and the change of its trajectory.     

一种采用双视场星敏感器的飞行器姿态角快速、高精度测量方法

针对姿态经常机动的飞行器之间建立激光通信问题,研究了一种针对这种飞行器的姿态角高精度、快速测量新方法.这种姿态角测量方法采用一种由宽、窄两种视场组成的双视场星敏感器,并以0轨道飞行器应用为例进行了姿态角测量仿真:其中的宽视场用于识别北极星,窄视场用于跟踪北极星;通过对北极星方向矢量测量值与其理论值进行比较精确求出了偏航、俯仰和滚动三个姿态角.分析表明,姿态角的角分辨率小于1″;测量过程不需要耗时的星图数据库搜索,一帧图像就可以完成一次快速测量.     

姿态运动对落舱微重力的影响研究

本文采用试验的均匀设计方法，结合对气动力矩的理论估算，利用计算机仿真，研究了姿态运动对落舱微重力水平的影响．结果表明，在落舱下落的前60s内，要想保持优于10(－3)g数量级的微重力水平，以满足一般科学实验的要求，则必须安装姿态控制系统．     

Attitude tracking control for variable structure near space vehicles based on switched nonlinear systems

An adaptive robust attitude tracking control law based on switched nonlinear systems is presented for a variable structure near space vehicle (VSNSV) in the presence of uncertainties and disturbances. The adaptive fuzzy systems are employed for approximating unknown functions in the flight dynamic model and their parameters are updated online. To improve the flight robust performance, robust controllers with adaptive gains are designed to compensate for the approximation errors and thus they have less design conservation. Moreover, a systematic procedure is developed for the synthesis of adaptive fuzzy dynamic surface control (DSC) approach. According to the common Lyapunov function theory, it is proved that all signals of the closed-loop system are uniformly ultimately bounded by the continuous controller. The simulation results demonstrate the effectiveness and robustness of the proposed control scheme.     

Interlaced optimal-REQUEST and unscented Kalman filtering for attitude determination

 Aimed at low accuracy of attitude determination because of using low-cost components which may result in non-linearity in integrated attitude determination systems, a novel attitude determination algorithm using vector observations and gyro measurements is presented. The various features of the unscented Kalman filter (UKF) and optimal-REQUEST (quaternion estimator) algorithms are introduced for attitude determination. An interlaced filtering method is presented for the attitude determination of nano-spacecraft by setting the quaternion as the attitude representation, using the UKF and optimal-REQUEST to estimate the gyro drifts and the quaternion, respectively. The optimal-REQUEST and UKF are not isolated from each other. When the optimal-REQUEST algorithm estimates the attitude quaternion, the gyro drifts are estimated by the UKF algorithm synchronously by using the estimated attitude quaternion. Furthermore, the speed of attitude determination is improved by setting the state dimension to three. Experimental results show that the presented method has higher performance in attitude determination compared to the UKF algorithm and the traditional interlaced filtering method and can estimate the gyro drifts quickly.     

整体叶盘高效强力复合铣A轴高精度控制技术研究

A轴单元作为五轴数控机床的关键功能部件,其控制精度直接影响整体叶盘的加工精度和表面质量.针对摩擦、齿隙、参数摄动和测量噪声等非线性干扰对A轴伺服系统控制精度的影响,提出了基于线性二次型最优控制(LQC)和滑模控制(SMC)相结合的鲁棒控制算法(LQSMC).该方法以系统状态空间表达式及LQC为基础,通过引入基于卡尔曼滤波器和控制输入的状态估计,对系统状态空间模型进行改进并定义新的滑模面方程,使得改进后的控制算法在性能上接近LQC并能有效抑制SMC的抖振.仿真分析和实验结果表明,LQSMC算法具有控制精度高、鲁棒性强和抑制干扰能力强等优点,其能有效提高A轴伺服系统的定位精度和跟踪精度,使整体叶盘型面加工精度和表面一致性得到保证,并显著降低了表面粗糙度.     

基于自抗扰控制的机翼受损飞机姿态控制器设计

飞机结构受损会导致飞机质量、重心和气动特性发生突变、对称性破坏以及较强的运动耦合,严重影响飞行安全.以机翼受损飞机为研究对象,采用质量微元法建立重心偏移飞机的动力学模型,分析其动态特性,并设计了基于自抗扰控制的姿态控制器.仿真结果表明,自抗扰控制器表现出良好的控制性能,针对突然受损情况设计的控制器具有较强的鲁棒性,能实时补偿结构受损引起的干扰力矩,快速准确地跟踪控制指令.     

微型导弹蒙特卡洛打靶仿真研究

导弹在实际作战飞行中,由于环境因素和系统误差的影响,其姿态和弹道的参数与理想弹道的参数存在偏差.对一种微型导弹在飞行中受到的多种随机干扰因素进行分析,给出了各种干扰因素的处理方法,建立了导弹六自由度弹道蒙特卡洛打靶仿真模型.通过蒙特卡洛计算机打靶仿真,对导弹的命中精度进行研究,验证了仿真模型的准确性和仿真方法的有效性.     

利用GPS载波相干测量技术确定空间飞行器姿态的研究

Ｇ Ｐ Ｓ载波相干测量技术存在的主要技术难题是载波相位整数模糊度的解算、导航星观测几何的优化等问题， 本文基于差分技术研究了这项技术在空间飞行器姿态确定方面的应用。     

F2层对地磁扰动的响应

利用37个电离层垂直探测站1974-1986年的数据,采用f0F2与地磁ap指数相关分析的方法,首次得到一个太阳活动周期各年东亚-澳大利亚扇区,欧洲-非洲扇区和美洲-东太平洋扇区F2层对地磁扰动响应随地磁纬度的分布.结果指出,地磁高纬和中纬地区为负响应,低纬和赤道地区为正响应,大约在±30°附近换向.最大正响应在磁赤道附近,最大负响应在地磁纬度±50°附近,最大负响应的幅度大于最大正响应的幅度.存在明显的经度差别和南北半球不对称性.