A new steering approach for VSCMGs with high precision

A new variable speed control moment gyro (VSCMG) steering law is proposed in order to achieve higher torque precision. The dynamics of VSCMGs is established, and two work modes are then designed according to command torque:control momentum gyro (CMG)/reaction wheel (RW) hybrid mode for the large torque case and RW single mode for the small. When working in the CMG/RW hybrid mode, the steering law deals with the gimbal dead-zone nonlinearity through compensation by RW sub-mode. This is in contrast to the conventional CMG singularity avoidance and wheel speed equalization, as well as the proof of definitely hyperbolic singular property of the CMG sub-mode. When working in the RW single mode, the motion of gimbals will be locked. Both the transition from CMG/RW hybrid mode to RW single mode and the reverse are studied. During the transition, wheel speed equalization and singularity avoidance of both the CMG and RW sub-modes are considered. A steering law for the RWs with locked gimbals is presented. It is shown by simulations that the VSCMGs with this new steering law could reach a better torque precision than the normal CMGs in the case of both large and small torques.     

考虑随机干扰的高超声速滑翔飞行器轨迹优化

为解决高超声速滑翔式飞行器具有干扰不确定性的再入轨迹优化问题,提出了一种基于广义正交多项式方法的随机轨迹优化数值求解方法。针对随机干扰,基于广义正交多项式方式对其分布进行采样,形成采样空间,而后将每个采样值代入确定性轨迹优化问题中进行反复迭代求解,得出观测值的样本空间,并计算其期望、方差和协方差,估计输出值。以最大纵程为代价函数对具有随机干扰的高超声速滑翔式飞行器最优轨迹进行了数字仿真。仿真结果表明,基于广义正交多项式的随机轨迹优化方法能够有效处理随机干扰对轨迹优化问题的影响,与蒙特卡洛法相比计算效率大大提高。     

电液伺服泵的分数阶无抖振滑模控制

电液伺服泵（IEHSP）由于在结构上实现了伺服电机和液压泵共转子、共壳体高度融合,在体积、噪声和效率等方面具有明显优势,具有很好的应用前景。为了提高电液伺服泵的调速性能与抗扰能力,设计了一种新型分数阶滑模控制器（NFOSMC）。首先,由于分数阶微积分理论的引入,控制器为系统提供了更多的控制余度。然后,针对传统滑模控制中存在的抖振问题,通过设计使控制器中直接包含有切换项的分数阶积分项,利用其滤波特性可以有效滤除抖振,实现无抖振滑模控制。同时利用Lyapunov稳定性定理证明了控制器可以保证系统在存在内扰与外扰时能够在有限时间内收敛于平衡点,另外控制器中避免了含有高阶分数阶微分项,扩大了分数阶阶数的取值范围。为了进一步提高抗扰能力,设计了分数阶扰动观测器（FODOB）,对系统内扰和外扰实时观测并补偿,有效提高了控制器的响应速度和刚度。最后,分别与PI控制、整数阶滑模控制器（IOSMC）和传统分数阶滑模控制器（CFOSMC）进行了仿真分析比较,结果表明该控制器能够有效改善速度跟踪性能和增强抗扰能力,消抖效果显著。      

铰链展开式构型航天器设计及其动力学仿真

基于航天器结构的模块化设计概念,设计了一种空间可展开航天器模块化结构构型,即铰链展开式构型。利用虚拟样机技术,建立了模块化本体和太阳翼虚拟样机模型。在空间失重环境下,分析了模块化本体和太阳翼在3种展开顺序下（本体各模块和太阳翼同时展开、太阳翼先展开本体各模块后展开和本体各模块先展开太阳翼后展开）对航天器姿态的影响,同时对比了不同扭簧参数对姿态角和展开时间的影响。仿真结果表明该模型可为未来高机动、多型态、多用途自适应变构型航天器的设计以及空间姿态控制提供技术支持和借鉴。     

输入受限的编队卫星分布式姿态协同控制

研究了跟踪时变参考姿态情况下的编队飞行卫星协同控制问题,提出了一种非线性饱和的分布式协同控制器。在控制器中引入了一个双曲正切函数向量,保证了连续控制输入的有界性。采用Barbalat引理对姿态跟踪情况下闭环协同控制系统的稳定性进行了分析,得出了系统渐近稳定的结论。通过对各种条件下的仿真,验证了算法的有效性,并确立了编队卫星信息流图的拓扑结构和控制器增益等因素与暂态过程中相对姿态保持性能的关系。     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点,传统的姿态控制器难以适用于该种复杂干扰并存的情况,文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器,并将角速度回路的滑模变量量化为直接力指令,以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰,从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定,分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明,该方法跟踪速度快,动态过程平稳,具有较强的干扰抑制能力,具有很强的鲁棒性。     

失效航天器姿态接管的SDRE微分博弈控制

针对燃料耗尽的失效航天器姿态接管控制问题,提出多颗微卫星协同实现姿态稳定的状态相关黎卡提方程(SDRE)微分博弈控制方法。首先,将姿态接管问题转化为多颗微卫星的微分博弈问题,基于组合航天器的姿态模型和微卫星的性能指标函数建立多颗微卫星的非线性微分博弈模型,微卫星通过独立优化各自的性能指标函数得到控制策略。其次,引入状态相关系数矩阵,将非线性博弈转化为状态相关线性二次型博弈,采用SDRE方法更方便地逼近微卫星的博弈均衡策略。最终通过李雅普诺夫迭代法求解耦合状态相关黎卡提方程组得到微卫星的状态反馈控制器,实现微卫星的自主决策。数值仿真验证了多颗微卫星采用微分博弈控制方法实现姿态接管的有效性和容错性。     

Nutation instability of spinning solid rocket motor spacecraft

The variation of mass,and moment of inertia of a spin-stabilized spacecraft leads to concern about the nutation instability.Here a careful analysis on the nutation instability is performed on a spacecraft propelled by solid rocket booster (SRB).The influences of specific solid propellant designs on transversal angular velocity are discussed.The results show that the typical SRB of End Burn suppresses the non-principal axial angular velocity.On the contrary,the frequently used SRB of Radial Burn could amplify the transversal angular velocity.The nutation instability caused by a design of Radial Burn could be remedied by the addition of End Burn at the same time based on the study of the combination design of both End Burn and Radial Burn.The analysis of the results proposes the design conception of how to control the nutation motion.The method is suitable to resolve the nutation instability of solid rocket motor with complex propellant patterns.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.