非线性动力Alfven波的演化

本文讨论了非线性动力Alfven波在1＞＞β＞＞me／mi条件下形成孤子解的限制条件，表明只有亚Alfven速度才能形成压缩型孤子．由动力Alfven波孤子和湍流产生的极大纵向电子速度不会超过本底电子热速度，但由此产生的纵向电场在小尺度范围可以很强，这可能对太阳风的能量传输与粒子加速产生一定影响．     

一种新型水溶性芯模的制备和性能

概述了金属模具不易脱模的形状复杂的复合材料结构件成型中遇到的工艺技术难题,着重对水溶性芯模的制备工艺特点和性能进行了研究,并将所制得的水溶性芯模成功的用于树脂基复合材料结构件的制造中。结果表明,水溶性芯模的各项性能满足复杂异型复合材料结构件制造的要求。     

An in situ laser induced breakdown spectroscope (LIBS) for Chandrayaan-2 rover: Ablation kinetics and emissivity estimations

A miniaturized in situ laser induced breakdown spectroscope-LIBS is one of the two lunar rover payloads to be flown in India’s next lunar mission Chandrayaan-2, with an objective to carry-out a precise qualitative and quantitative elemental analyses of lunar regolith at the proximity of the landing region. As per the imposed mission constraints and the executed design optimization studies, a compact and light-weight LIBS prototype model is developed at our premises. This paper mainly concerns with the estimation of theoretical aspects; especially on evaluation of elemental ablation parameters and signal-to-noise ratio (SNR) calculations for the designed instrument. Theoretical estimations and simulations yielded an incident laser power density of the order of 5 × 10¹⁰ W/cm² on the target surface at a defined lens-to-surface distance (LTSD) of 200 mm and revealed an SNR > 100 for most of the elements under consideration. This paper also addresses the impact of LTSD variation on detection capability. The estimation of plasma-temperatures was carried out utilizing the emission spectra obtained under high vacuum environments employing the LIBS laboratory model. Experimental investigations and the performed theoretical estimations asserted the successful operation of the configured LIBS instrument for in situ elemental analyses on lunar surface.     

原子钟长期特性测量系统的设计与实现

通过在对各种时频测量硬件的搭建,建立一套多台被测原子钟同时与本地频率标准钟比对的测量系统。该系统以数据库服务做为最底层的数据支持,能够实时的监控测量数据,显示当前被测原子钟的频率准确度,并能够在获得了足够的数据之后,计算和显示被测原子钟的日稳和漂移数据和曲线,方便时频计量人员操作,提高了送检原子钟的计量检定效率。     

航天器用新型聚酰亚胺薄膜性能研究

原子氧是低地球轨道环境中对航天器影响较为严重的因素之一. 为了提高聚酰亚胺薄膜抗原子氧侵蚀的性能, 依据结构与性能的关系, 设计合成了新型的聚酰亚胺薄膜. 采用这种新型聚酰亚胺薄膜制备了二次表面镜, 利用地面模拟设备对热控涂层进行原子氧暴露试验, 结果表明其具有优异的耐原子氧侵蚀性能. 此外, 真空elax-elax紫外、真空elax-elax质子、真空elax-elax电子辐照等空间环境模拟试验表明, 这种耐原子氧聚酰亚胺薄膜二次表面镜热控涂层具有良好的空间稳定性.      

基于HMDP的无人机三维路径规划

路径规划是UAV(Unmanned Aerial Vehicle)自主飞行的重要保障.初步建立了基于MDP(Markov Decision Processes)的全局路径规划模型,把UAV的路径规划看作是给定环境模型和奖惩原则的情况下,寻求最优策略的问题;为解决算法时空开销大、UAV航向改变频繁的缺点,提出一种基于状态聚类方法的HMDP(Hierarchical Markov Decision Processes)模型,并将其拓展到三维规划中.仿真实验证明:这种简单的规划模型可以有效解决UAV的三维全局路径规划问题,为其在实际飞行中的局部规划奠定了基础.     

基于同步双口SRAM的原子磁强计磁共振相位提取系统设计

针对原子磁强计磁共振激励信号相位提取过程中,数据量大、实时性强、同步要求高等特点,设计了一种基于同步双口SRAM的磁共振相位信息提取系统。首先利用FPGA控制高速同步采样AD进行数据转换;然后经同步双口SRAM实现数据的高速缓存和同步读写;最后由DSP经外部中断触发定时读取缓存的数据,并进行数字锁相处理,提取相位信息。实验结果表明:该系统对频率为35~350kHz之间的正弦信号相位提取稳定度达到0.006°,满足原子磁强计静态噪声小于20pT的应用要求。     

Meteoroid bombardment as a source of the lunar exosphere

The column densities of impact-produced metal atoms in the exosphere during the peaks of activity of the main meteor showers – Geminids, Quadrantids and Perseids – and during quiet periods are estimated. The Na supply rate is estimated to be 2 × 10⁴, 3 × 10³, 10⁴, and 2 × 10⁴ atoms cm⁻² s⁻¹ for sporadic meteoroids, Perseid, Geminid, and Quadrantid meteor showers, respectively. A low upper limit on Ca in the lunar exosphere is explained by the condensation of Ca into dust grains during expansion of the cooling impact-produced vapor cloud. The chemical composition of gas-phase species released to the lunar exosphere during meteoroid impacts has been estimated. Most impact-produced molecules that contain metals are destroyed by solar photons while on ballistic trajectories. Energies of Na, K, Ca, and Mg atoms produced via photolysis of the respective monoxides are estimated to be 0.4, 0.35, 0.6, and 0.45 eV, respectively. The relative content of impact-produced Na and K atoms is maximal at altitudes of about 1000–2000 km and during the main meteor showers, lunar eclipses, and passages of the Moon through the Earth’s magnetosphere.     

羰基镍粉中铜、锰、钴含量的连续测试技术

建立了一种用AIR-C2H2火焰原子吸收光谱法连续测试镉镍电池羰基镍粉中铜、锰、钴含量,介绍了铜、锰、钴最佳测试条件,同时对样品硝化处理条件及在测试样品中的干扰因素进行了综合考虑。该方法具有很好的精密度和准确度,具有操作简便、时间快速、灵敏度高、重现性好、容易掌握等特点。铜、锰、钴含量的相对标准偏差均小于1.0%（n=6）。标准加入回收率均在97.0%-99.0%范围内。适用于镉镍电池羰基镍粉中含有较多共同被测离子铜、锰、钴的生产现场控制分析和样品系统分析。     

卫星表面原子氧通量和遭遇量的计算及讨论

建立了一个较为理想情况下卫星表面原子氧通量和遭遇量的计算模式。在此基础上,着重讨论了轨道高度、太阳活动、飞行攻角及轨道倾角等因素对原子氧通量和遭遇量的影响。