基于飞秒光学频率梳的双通道光频测量设计

基于差频技术的单块飞秒光学频率梳被广泛应用于光频的精密测量领域。通过将飞秒激光的重复频率和载波包络相移同时锁定至原子钟上,可以将飞秒光学频率梳的稳定状态延长至9 h。文中提出了一种基于飞秒光学频率梳的双通道光频测量设计,并且针对两种待测光频的不同情况,给出了不同的测量方法。这种设计对将来实现高效率的光频测量具有重要意义。     

Compact frequency standard using atoms trapped on a chip

We present a compact atomic frequency standard based on the interrogation of magnetically trapped ⁸⁷Rb atoms. Two photons, in the microwave and radiofrequency domain excite the atomic transition. At a magnetic field of 3.23 G this transition from ∣F = 1, m_F = −1〉 to ∣F = 2, m_F = 1〉 is 1st order insensitive to magnetic field variations. Long Ramsey interrogation times can thus be achieved, leading to a projected stability in the low 10⁻¹³ at 1 s. This makes this device a viable alternative to LITE and HORACE as a good candidate for replacing or complementing the rubidium frequency standards and passive hydrogen masers already on board of the GPS, GLONASS, and GALILEO satellites. Here we present preliminary results. We use an atom chip to cool and trap the atoms. A coplanar waveguide is integrated to the chip to carry the Ramsey interrogation signal, making the physics package potentially as small as (5 cm)³. We describe the experimental apparatus and show preliminary Ramsey fringes of 1.25 Hz linewidth. We also show a preliminary frequency stability σ_y = 1.5 × 10⁻¹²τ^−1/2 for 10 < τ < 10³ s. This represents one order of magnitude improvement with respect to previous experiments.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

SAR二维锯齿波调频干扰研究

分析线性调频信号加入锯齿波调频干扰的频谱特点和干扰效果,发现锯齿波调频干扰有产生虚假目标多、功耗低的特点,且在二维干扰的情况下能产生大面积多虚假目标,有效地对真实目标进行遮盖。并且分析了调制参数变化对干扰效果的影响,利用仿真实验验证了理论的正确性。     

基于标准弹道点的最优制导方法

由于基于需要速度的显式制导方法要确定虚拟目标点,虚拟目标点的确定要对地球扁率和再入阻力的影响进行修正,存在着百米以上的修正误差,为此提出了基于标准弹道点的最优制导方法,即将标准弹道的某点作为目标点进行需要椭圆轨道计算及最优入轨控制。提供了采用弹上迭代制导方法实现最优控制,同时给出了预测关机参数的需要椭圆轨道终端约束校正方法。该制导方法无需进行地球扁率和再入阻力的影响修正,可以减少方法误差,仿真计算证明了这一点。     

零差激光干涉仪在超低频大振幅振动测量中的应用

介绍了利用正交的零差激光干涉仪测量安装于振动台面被测靶体的位移,实时计算出运动速度和加速度,从而实现对位移达1m的超低频振动传感器的实时绝对校准。     

NASA-HDBK-7005《动力学环境准则》分析

文章从标准化的角度讨论了动力学环境试验技术,分析了以MIL-STD-810为代表的各类产品通用的环境标准和以NASA-HDBK-7005为代表的航天系统动力学环境标准所形成的两个环境标准体系的特点,讨论了NASA-HDBK-7005的标准内容,提出了我国航天动力学环境标准化工作的建议和意见。     

超声波流量测量中流速计算方法的对比

超声波流量计(UFM,Ultrasonic Flow Meter)通过测量管路中顺流和逆流方向的超声波传播时间变化计算流速,因此超声波传播时间的准确测量对流量计的精度影响至关重要.对超声波流量计的测量方法进行研究,从环境温度的变化、时间测量的准确性、不确定度的计算3个方面,对比超声波传播时间差法和频率差法对流量测量精度的影响.通过超声波流量测量实验,验证了在流量计未校准的情况下,与频率差法相比,时间差法的测量精度更高,且其校准系数曲线的线性度更好,校准后可在全流量范围内获得更高的测量精度.     

超高频脉冲电弧焊接熔池金属流动行为

熔池金属流动一方面受电弧行为影响,另一方面与凝固组织形核、结晶过程联系紧密,是电弧焊接基础研究的关键,针对电弧力作用研究了超高频脉冲电弧焊接(UHFP-AW,Ultra High Frequency Pulsed Arc Welding)熔池金属流动特点,采用理论研究与试验分析相结合的方式对熔池流动方式、强度、温度分布等要素进行了分析,并完成了液态金属表面运动特征监测.结果表明,超高频脉冲电弧对熔池液态金属的热、力作用显著,表面流体流速大于30cm/s,UHFP-AW电弧力造成熔池表面沉降变形,引起双环流,熔池温度扩散范围相应减小,有效降低了电弧热量对母材金属的影响,尤其在钛合金焊接中对控制焊缝晶粒尺寸具有重要意义.      

大跨悬挑屋盖风压分布风洞试验分析

通过大跨悬挑曲面屋盖刚性模型风洞试验,分析各风向角风压系数均值等值线图及跨中区域时体型系数以确定最不利风向角,研究跨中迎风边缘及顺风测点功率谱及相干特性,最后针对跨中不同位置测点风压概率分布密度特性探讨峰值因子合理取值。