飞行员培养中思想政治理论课教育教学改革探索

飞行专业培养的是从事特殊职业的飞行员,飞行专业思想政治教育有其不同于一般大学生的地方。本文总结了飞行员培养对象的特点,调查了用人单位订单式培养飞行员的特殊要求,研究了飞行员培养中思想政治理论课教育教学的特殊规律,探索了飞行员培养中思想政治理论课教育教学改革的方向。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

Ni-7.3%Si-2.2%B合金快淬组织与深过冷快凝机制

 采用B_2O_3玻璃和纯循环过热净化相结合的方法去除液态金属中的异质晶核,使液态Ni-7.3％Si-2.2％B合金获得了330K的过冷度。对比分析了该合金在低温基板上的快淬薄片与大体积深过冷试样的微观组织。借助计算机和红外测温系统,快速采集了熔体的再辉过程。数据处理发现,在深过冷液态金属的整个再辉区间,温度的上升速率呈瞬态变化特征,再辉时间随初始过冷度的提高而减小。最后,由再辉曲线确定出深过冷液态金属再辉过程中的固相分数与时间以及凝固速度与瞬时过冷度的关系。     

战伤诊断与修复计算机辅助系统

概述了战伤诊断与修复的基本情况,对战伤诊断和修复的过程进行了简要说明,定义了战伤诊断与修复计算机辅助系统,同时利用关系型数据库语言Vc 6.0编写了战伤诊断与修复计算机辅助系统应用软件,介绍了战伤诊断与修复计算机辅助系统应用软件的功能及使用方法。为说明计算机辅助系统应用软件的实际过程,文章最后针对某型飞机一种典型的战伤情况,利用本文介绍的战伤诊断与修复计算机辅助系统对某型战斗机进行了战伤诊断与修复分析。     

解读企业财务"三表"的方法与技巧研究

企业财务“三表”是反映企业家底、经营全貌、发展前景、未来命运的“蓝图”和“家谱”,企业的投资、经营、监督者,只有精于解读,才能正确投资决策、提高企业效益、规避经营风险、实施有效监管。     

基于滑模自适应控制的不确定混沌系统修正函数投影同步

研究了一类不确定混沌系统的修正函数投影同步。首先,设计了一类滑模曲面;基于该曲面设计了同步控制器,并采用自适应技术设计了自适应律对不确定参数进行逼近。在一定条件下,该同步控制方案可以实现2个不确定异结构混沌系统的修正函数投影同步。然后,为保证合适的控制量,对控制增益进行了优化。从同步效果来看,所设计的控制器对混沌系统的不确定项的影响具有较强的鲁棒性。最后,数值仿真验证了该控制器的有效性和可行性。     

多层模糊逻辑控制器的设计

本文提出一种适合于多输入多输出(MIMO)系统的多层模糊逻辑控制器(MLFLC)，该控制器由若干个多输入单输出(MISO)模糊控制器构成，每个MISO模糊控制器由许多单输入单输出(SISO)模糊控制器组成。该控制器采用互补型隶属函数，具有一组零控制面，只要使量化因子满足一定的条件，控制系统就是渐近稳定的。最后将上述控制器用于二节机械手中进行仿真试验，验证了上述算法的可行性和有效性。     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

新型的超宽带正交接收系统幅相误差实时的数域均衡方法

文中对超宽带正交解调接收系统的幅相误差进行了分析,针对文[1]均衡方案的缺点,然后在此基础上针对系统超宽带的特点提出一种新的自适应实时数域均衡法。同时,针对系统超宽带的特点对串行算法进行了修改,提出一种适合于FPGA高速实现的流水算法。并对这两种算法进行了仿真比较。