超硬铝合金整体精车加工成型壳体及其轴压稳定性研究

本文首先简要讨论了飞行器壳体采用超硬铝合金材料、整体精车加工成型设计出优点，它对小尺寸再入飞行器设计有重要意义和应用价值。接着对超硬铝合金ＬＣ４整体精车加工成型壳体进行较详细的研究。给出了六个试件的轴压试验结果，并用小样件统计方法进行了统计分析。试验结果表明：与过去试件的试验结果相比，临界应力系数提高近一倍。散布度明显减小。对临界应力系数给出的强度变差系数值和概率下限值可供设计使用。     

投弹对飞机稳定性影响分析

对带有自动驾驶仪的飞机投弹时的稳定性进行了分析。对投弹干扰问题进行了描述，并对投弹过程进行了建模、仿真和控制律优化设计。结果表明．导弹投放过程中，飞机能够很好地恢复和稳定姿态，飞机平台可以保证导弹顺利投放。     

矢量喷管控制对发动机性能的影响

建立了带推力矢量的涡扇发动机数学模型。结合某型涡扇发动机研究了矢量喷管偏转对发动机工作和性能的影响,研究结果表明,矢量喷管偏转时,在一定条件下,发动机低压转子共同工作线向喘振边界移动,而高压转子共同工作线不发生变化,发动机总推力是增大的。但当将矢量喷管偏转与喉部面积放大相结合,可使发动机保持原工作状态不变,而发动机总推力却随着几何矢量角的增大而减小。      

Multi-scale design and optimization for solid-lattice hybrid structures and their application to aerospace vehicle components

By integrating topology optimization and lattice-based optimization, a novel multi-scale design method is proposed to create solid-lattice hybrid structures and thus to improve the mechanical performance as well as reduce the structural weight. To achieve this purpose, a two-step procedure is developed to design and optimize the innovative structures. Initially, the classical topology optimization is utilized to find the optimal material layout and primary load carrying paths. Afterwards, the solid-lattice hybrid structures are reconstructed using the finite element mesh based modeling method. And lattice-based optimization is performed to obtain the optimal cross-section area of the lattice structures. Finally, two typical aerospace structures are optimized to demonstrate the effectiveness of the proposed optimization framework. The numerical results are quite encouraging since the solid-lattice hybrid structures obtained by the presented approach show remarkably improved performance when compared with traditional designs.     

回注蒸汽型燃气轮机动态特性的仿真研究

 本文建立了回注蒸汽型燃气轮机的非线性数学模型。其中考虑了变比热、容积效应和气道中热交换等因素的影响,因此模型精度较高。利用依此编制的数字仿真程序,对所述燃气轮机进行了稳态和动态特性的仿真研究,得出了某些有意义的结论。     

军品科研项目管理研究

阐述了项目管理的基本理论和方法，提出了军品科研工项目实施项目管理的方案；指出了应注意和需解决的问题；并对项目管理理论的学习、实施方案的研究、管理机关职责的转变和配套制度的制定提出了建议。     

高精度电磁标定力数值模拟及实验研究

高精度电磁标定力源是微推力测量系统的重要组成要素之一。为了获得性能优良的电磁标定力,本文综合采用数值模拟及实验测量两种方法分析研究了线圈和永磁铁相对位置变化时,磁铁几何尺寸对电磁力输出特性的影响：对于直径较大、厚度较小的永磁铁而言,其电磁力随相对位置的变化会存在极值,且极值点附近的电磁力具有较好的稳定性和一致性。根据电磁力变化趋势特性,提出了线圈和永磁铁相对基准中心（极值点）位置的高精度设置方案,且基准中心位置附近的电磁力变异系数可达0.00252,为高性能电磁力的获得提供了基础。最后,确定了大直径永磁铁+线圈组合型电磁力产生装置,并基于拟合方法建立了一定包络区间内的高精度电磁力控制关系式,其拟合曲线的估计标准误差约为0.0137,为微推力测量台架的标定提供了理论指导和技术支持。     

10cm氙离子推力器变推力特性研究

非重力阻尼的连续、快速、高精度补偿是实现重力梯度测量卫星精细重力场测量的关键技术之一,直接影响到整星工程任务的成败。针对重力梯度测量卫星在轨飞行期间对电推进系统宽范围连续变推力能力的应用需求,分析了10cm氙离子推力器推力调节响应特性。在此基础上,通过对阳极电流、励磁电流和阳极流率等推力高敏感响应参量的组合调节,开展了推力调节试验研究,验证了10cm氙离子推力器宽范围连续变推力调节能力,获得了1～20mN范围内的推力调节性能及其变化规律。试验结果表明：在采用地面供电、供气设备条件下,10cm氙离子推力器能够在100～597W的功率范围内实现0.98～20.29mN的推力宽范围调节,比冲175～3500s,推力分辨率优于50μN。研究为建立10cm氙离子电推进系统的推力控制数学模型及调节控制算法奠定基础。     

高过载条件下绝热层烧蚀实验方法研究 (Ⅰ)方案论证及数值模拟

分析了高过载对固体火箭发动机流场和绝热层烧蚀的影响规律，提出一种新的研究思路：采用数值模拟方法来预示发动机三维两相流场，建立高过载流场模拟实验装置，开展绝热层烧蚀实验，建立高过载条件下的绝热层烧蚀模型，在此基础上发展高过载发动机绝热层设计和烧蚀预示方法。其中关键技术是高过载流场的模拟，对粒子加入法和弯管分离法两种方案进行了论证，认为弯管分离法原理上是可行的。为了验证这种方案的可行性，开展了弯管通道两相流的数值模拟研究，计算结果表明弯管装置具有使凝相粒子聚集形成高浓度粒子流的功能。     

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.