Time delay compensation in lateral-directional flight control systems at high angles of attack

The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack. In this investigation, the effects of time delay on the lateral-directional stability augmentation system in high-α regime are discussed based on the $\dot{\beta }$ model, which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateral-directional unsteady aerodynamic characteristics at high angles of attack. Both the $\dot{\beta }$ model and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-α maneuvers. The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay. Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based on $\dot{\beta }$ model are designed to address the time delay in different maneuvers. The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack. Finally, the gain-prediction compensator is combined with a linearized $\dot{\beta }$ model reference adaptive controller to compensate the adverse effects of very large time delay, which exhibits excellent performance when addressing the extreme conditions at high angles of attack.     

基于被动复制方式的容错CORBA模型

容错CORBA(Common object request broker architecture,公共对象请求代理体系结构)是OMG(Objectmanagement group,对象管理组织)为了给分布式系统带来容错特性而对通用CORBA所作的一个扩展。文中首先介绍了基于被动复制方式的容错CORBA模型——PFORBUS,针对其中主服务器的重要性,该模型提出了一个主服务器选择算法,该算法基于三角模糊数对不同服务器的可靠性进行评价,从而找出可靠性评价值最高的服务器作为主服务器。然后详细介绍了PFORBUS模型在该算法支持下的相关工作,包括系统初始化、正常工作流程及主服务器失效后的处理等。最后对该模型采用不同主服务器选择算法的情况进行了仿真,并取得了较好的效果。     

对方案有模糊互补偏好关系的模糊多属性决策法

研究了权重为区间数且对方案有模糊互补偏好关系的模糊多属性决策问题.首先,基于模糊互补判断矩阵的主观偏好信息,利用转换函数将决策信息一致化,并建立了目标规划模型.通过求解该模型得到属性的权重,运用加性加权法获得各方案的模糊综合属性值.其次,提出了基于方案的模糊正理想解与其模糊综合属性值相似度的方案排序法.该方法既能充分利用已有的客观信息,又能最大限度地体现决策者的主观意愿,且具有操作简便、易于上机实现的特点.该方法已应用于解决风险投资领域中项目评估问题.     

三维扰动波在局部粗糙边界层中的稳定性研究

采用局部喷、吸、喷和吸组合来模拟局部粗糙壁面,数值计算获得稳定的三维边界层的基本流.在此基础上研究了三维扰动波在该基本流中的空间演化问题,讨论了局部粗糙的形式、分布结构对三维扰动波的幅值增长率及流动稳定性影响.计算结果表明:三维局部粗糙对三维扰动波的增长、涡的形成都起着激励的作用.扰动波演化产生的平均流修正及局部粗糙诱导展向速度的存在,影响着流体运动稳定性.与光滑壁面相比,三维局部粗糙作用下扰动波的传播角度与相位角发生明显变化,而不同形式的二维局部粗糙壁面边界层显示出不同的稳定特性.     

双臂空间机器人关节运动的一种增广自适应控制方法

讨论了载体位置、姿态均不受控制情况下,具有未知参数的自由漂浮双臂空间机器人系统的自适应控制问题.由于此类机器人系统具有结合系统动量及动量矩守恒关系得到完全能控形式的系统动力学方程,以及系统惯性参数不符合惯常的线性函数关系的特点,因而地面机器人的控制方法在此难以直接推广应用.为了克服上述难点,仅将系统动量守恒关系耦合到系统动力学方程当中,而不耦合系统动量矩守恒关系,结果得到一组欠驱动形式的系统动力学方程.该系统动力学方程的优点是关于一组组合惯性参数能保持惯常的线性函数关系.以此为基础,并借助增广变量法,针对双臂空间机器人末端爪手所持载荷参数未知的情况,设计了关节空间轨迹跟踪的自适应控制方案.该控制方案的显著优点为,不需要测量、反馈双臂空间机器人漂浮基的位置、移动速度和移动加速度.系统的数值仿真,证实了方法的有效性.      

基于自适应网格的钝头体激波诱导燃烧现象数值模拟研究

钝头体激波诱导燃烧是爆震研究的一个基本问题.针对化学恰当量比的H2/Air预混气体在Ma=4.79和Ma=6.46时的激波诱导燃烧现象开展数值研究,采用基于有限体积法的块结构自适应网格加密程序AMROC,对带化学反应源项的轴对称Euler方程解耦求解,考察了数值模拟中不同形式的MUSCL重构格式、限制器类型以及化学反应...     

基于隶属度和LMK-ELM的航空电子部件诊断方法

为提高航空电子部件模块级故障诊断精度，提出一种新的面向"软聚类"的局部多核学习（LMKL）-超限学习机（ELM）离线诊断方法。通过引入模糊C均值聚类对样本空间进行模糊划分，挖掘聚类内部多样性的同时，实现了对过学习的抑制；将模糊划分产生的隶属度信息融入LMKL-ELM的优化过程，运用基于初始-对偶混合优化问题的三步优化策略克服了局部核权重二次非凸的问题，在l₁-范数与l₂-范数约束下分别给出了相应的更新方法。将所提方法应用于某型机前端接收机，结果表明：与4种流行的多核诊断方法相比，该方法可有效避免漏警、抑制虚警，在l₁-范数和l₂-范数约束下，其诊断精度比其他方法的平均值分别提升了4.09%和5.13%。     

State estimate for stochastic systems with dual unknown interference inputs

Stochastic system state estimation subject to the unknown interference input widely exists in many fields, such as the control, communication, signal processing, and fault diagnosis. However, the research results are mostly limited to the stochastic system in which only the dynamic state model or the measurement model concerns the individual unknown interference input, and the state model and the measurement model are both with the same unknown interference input. State estimate of the stochastic systems where the state model and the measurement model contain dual Unknown Interference inputs (dual-UI) with different physical meanings and mathematical definitions is concerned here. Firstly, the decoupling condition with the Unknown Interference input in the State model (S-UI) is shown, which introduces the decoupled system with the adjacent Measurement concerned Unknown Interference inputs (M-UI) appearing in the state model and the measurement model. Then, through defining the Differential term of the adjacent M-UI (M-UID), the equivalent system with only M-UID in the state model is obtained. Finally, considering the design freedom of the equivalent system, the decoupling filter in the minimum mean square error sense and the adaptive minimum upper filter with different applicable conditions are represented to obtain the optimal and sub-optimal state estimate, respectively. Two simulation cases verify the effectiveness and superiority compared with the traditional methods.     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.     

模糊控制在飞机刹车系统中的应用

模糊控制是利用人的智能和经验制定一些模糊规则,进行推理建立查询库,以克服非线性参数的变化对系统的干扰,提高控制系统的鲁棒性和决策预见性,仿真结果显示,这种控制方法应用于现代飞机刹车系统能达到满意的控制精度。