纤维缠绕低损伤退绕跟随系统

为降低纤维缠绕过程中纱筒退绕的纤维磨损,研制了低损伤退绕跟随系统。通过分析纱筒卷绕特点及退绕运动过程,提出了角度替代的控制思想和导纱器自适应跟随控制策略;通过计算机控制伺服电机驱动导纱器运动,可实现对任意卷绕线型的自动跟随。实际应用表明:该方法可行,研制的系统跟随效果理想,有效消除了纤维的摩擦损伤,提高了缠绕复合材料制品的质量。     

基于LADRC的无人机高精度定高控制

针对复杂气流扰动对无人机（UAV）航迹高度控制的影响,对存在复杂气流扰动下的定高控制策略、控制结构和控制器参数优化展开研究,实现高精度高度控制。基于线性自抗扰控制（LADRC）确定总体控制架构,设计扩张状态观测器（ESO）观测估计纵向高度通道和速度通道中存在的总扰动,在控制中引入扰动补偿,减小扰动对系统输出造成的影响。对UAV在飞行过程中存在的大气紊流扰动或离散突风等风干扰分析其功率谱密度,构造考虑风扰动对高度影响、时域响应特性和稳定裕度的综合目标函数,通过粒子群优化算法得到具有高精度、高抗干扰性能的控制器参数,优化中考虑风干扰的功率谱密度分布,减小了控制器参数设计的保守性。通过与常规比例-积分-微分（PID）控制器控制效果进行对比,说明基于线性自抗扰控制器的纵向高度控制的优异性能。      

扩展近似时间最优伺服控制及其试验验证

针对带有惯性阻尼环节的典型伺服系统,提出一种能实现大范围快速定点运动的控制方案。控制方案首先利用时间最优控制律进行快速目标追踪,当系统速度下降到一定范围内时平滑切换成线性控制律。采用线性控制区内的闭环极点阻尼系统和自然频率作为设计参数,给出了全参数化的控制律。基于Lyapunov理论分析了控制系统的闭环稳定性。将该控制方案用于一个直流伺服电机的位置-速度环的定点位置控制,并进行了MATLAB数字仿真和基于TMS320F28335 DSC的试验研究。结果表明:所设计的控制系统可以对大范围的给定目标进行快速和准确的跟踪,且对扰动和系统参数差异具有较好的鲁棒性。     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.     

Midlatitude ionospheric F2-layer response to eruptive solar events-caused geomagnetic disturbances over Hungary during the maximum of the solar cycle 24: A case study

In our study we analyze and compare the response and behavior of the ionospheric F2 and of the sporadic E-layer during three strong (i.e., Dst?<??100nT) individual geomagnetic storms from years 2012, 2013 and 2015, winter time period. The data was provided by the state-of the art digital ionosonde of the Széchenyi István Geophysical Observatory located at midlatitude, Nagycenk, Hungary (IAGA code: NCK, geomagnetic latitude: 46.17° geomagnetic longitude: 98.85°). The local time of the sudden commencement (SC) was used to characterize the type of the ionospheric storm (after Mendillo and Narvaez, 2010). This way two regular positive phase (RPP) ionospheric storms and one no-positive phase (NPP) storm have been analyzed. In all three cases a significant increase in electron density of the foF2 layer can be observed at dawn/early morning (around 6:00 UT, 07:00 LT). Also we can observe the fade-out of the ionospheric layers at night during the geomagnetically disturbed time periods. Our results suggest that the fade-out effect is not connected to the occurrence of the sporadic E-layers.     

通用航空机队设备可靠性动态识别模型

通用航空机队设备可靠性是通航单位安全运行的前提条件,是影响运营单位经济效益的重要因素之一。根据通航单位机队设备可靠性数据统计、分析及实际使用情况,采用ATA100章节名称作为指标源。综合可变模糊识别方法和权重阶梯朴素贝叶斯分类器模型的优势,构建了通用航空机队设备可靠性动态识别模型。为了避免主观给定指标权重导致的不合理,应用熵权法客观获取指标权重。最后利用实例测试样本验证了权重阶梯朴素贝叶斯分类器的合理性,并基于该方法对待识别样本进行了可靠性状态识别。实例分析表明：基于权重阶梯朴素贝叶斯分类器的通用航空机队设备可靠性状态识别模型具有较强的可行性和合理性,为通用航空机队设备可靠性状态提供了一种科学的识别方法。     

抗扰动复合非线性伺服控制器的设计与应用

针对典型的电机伺服系统,提出了一种鲁棒复合非线性伺服控制器的离散域设计方案。把系统的扰动和不确定性归结为一个斜坡信号(其变化率恒定),设计一个降维线性扩展状态观测器,对系统未测量状态和未知扰动加以估计。把设计的控制律应用于永磁同步伺服电机,先在MATLAB上进行仿真分析,随后基于TMS320F28335DSC进行试验测试。结果表明系统在各种类型扰动作用下,对目标位置都能实现快速、平稳和准确的跟踪,具有较好的鲁棒性。     

基于模型补偿的风力机变桨距线性自抗扰控制器设计

设计了一种变桨距线性自抗扰控制器,估计和补偿了系统未建模部分和外界干扰,实现额定风速以上时系统输出功率稳定于额定值;并采用模型补偿方法对自抗扰控制器进行优化,减少了参数整定的数目,提高了系统控制精度。对额定功率为300 kW的风电机组分别在阶跃风、阵风以及湍流风作用下进行系统仿真。结果表明,该方法可以快速调节风速变化引起的输出波动,使得系统输出稳定且超调量小,具有很好的稳定性和鲁棒性。