基于纹理的活动轮廓三维图像分割研究

对具高噪声和低对比度三维图像的识别和分割算法进行了研究。基于活动轮廓模型,用Gabor变换提取图像的纹理特征,根据统计学信息假设,通过偏微分方程水平集和窄带方法求解,获得较基本活动轮廓的算法分割更光滑精确的物体轮廓。实验结果表明:改进模型算法的效率和准确度达到预期效果。     

自抗扰控制算法在发动机加力过渡态控制中的应用

主要研究了航空发动机加力过渡态控制的新方法。在不改变原有发动机控制结构的基础上,提出了一种增广LQR法(Augmented Linear Quadratic regulator-ALQR)综合ADRC(Active Disturbance Rejection Control)干扰补偿控制的算法(简称ALQR+ADRC),该算法除了有原ALQR控制所具备的强的消除静差能力之外,还兼具AD-RC优良的干扰补偿能力。通过模拟快速进入/退出发动机加力过渡态过程,验证了该算法具有理想的控制效果,能够较好地协调加力燃油供给和喷口开张,在整个过渡态过程中对核心机工作有较小的影响。     

光致伸缩作动器对开口球壳的主动振动控制

基于电压源模型,推导出薄膜式光致伸缩作动器应变与光强的本构关系。建立光电层合球壳系统动力学方程及模态控制方程。利用规格化后的模态控制因子对球壳子午线方向及圆周方向的薄膜与弯矩效应进行评价,不同位置下的模态控制因子为作动器布局优化提供了依据。将LQR控制算法与光源激励策略相结合,确定光电层合球壳系统的主动控制策略。进行主动振动控制仿真,得到球壳位移及控制光强响应曲线。仿真结果表明,在较低能量的控制光强下,光致伸缩作动器可实现对球壳的主动振动控制,且振动抑制效果明显。
     

Acceleration sensors based modal identification and active vibration control of flexible smart cantilever plate

Some flexible appendages of spacecrafts, such as solar panels, are cantilever plate structures. Thus, vibration problem is unavoidable when there is slewing maneuver or external disturbance excitation. Vibration of such cantilever plate structures includes coupled bending and torsional motion. Furthermore, the low amplitude vibration near the equilibrium point is very difficult to be quickly suppressed due to nonlinear factors of the hardware in the system, which is harmful to stability and attitude control accuracy. To solve these problems, acceleration sensor-based modal identification and active vibration control methods are presented for the first two bending and the first two torsional modes vibration of the cantilever plate. Optimal placements of three acceleration sensors and PZT patches actuators are performed to decouple the bending and torsional vibration of such cantilever plate for sensing and actuating, and identifications are achieved by experiments. A nonlinear control method is presented to suppress both high and low amplitude vibrations of flexible smart cantilever plate significantly. Experimental comparison researches are conducted by using acceleration proportional feedback and the presented nonlinear control algorithms. The experimental results demonstrate that the presented acceleration sensor-based methods can suppress the vibration of cantilever plate effectively.     

High resolution science with high redshift galaxies

We summarize the high-resolution science that has been done on high redshift galaxies with Adaptive Optics (AO) on the world’s largest ground-based facilities and with the Hubble Space Telescope (HST). These facilities complement each other. Ground-based AO provides better light gathering power and in principle better resolution than HST, giving it the edge in high spatial resolution imaging and high resolution spectroscopy. HST produces higher quality, more stable PSF’s over larger field-of-views in a much darker sky-background than ground-based AO, and yields deeper wide-field images and low-resolution spectra than the ground. Faint galaxies have steadily decreasing sizes at fainter fluxes and higher redshifts, reflecting the hierarchical formation of galaxies over cosmic time. HST has imaged this process in great structural detail to z  6, and ground-based AO and spectroscopy has provided measurements of their masses and other physical properties with cosmic time. Last, we review how the 6.5 m James Webb Space Telescope (JWST) will measure First Light, reionization, and galaxy assembly in the near–mid-IR after 2013.     

基于主动约束层阻尼控制的大型挠性航天器动力学模型

以大型挠性航天器简化模型——中心刚体和固接板混合系统为对象,同时考虑板表面粘贴的主动约束层阻尼结构,根据拟坐标拉格朗日方程,建立了包含所有高阶小量的完整动力学模型。建模时,采用混合坐标描述中心刚体和主动约束阻尼板的运动,用Golla-Hughes-Mctavish模型描述阻尼材料的复模量。基于该动力学模型可进行空间柔性板振动的主动约束阻尼控制器设计和大型挠性航天器的姿态动力学研究。     

基于特征空间变换的运载火箭Pogo模型降阶方法

针对运载火箭Pogo状态空间模型存在维数高和奇异性的问题,开展了 Pogo模型的降阶方法研究.基于特征空间变换理论,导出了一般形式的Pogo状态空间模型的解耦形式.该形式与推进系统和结构系统的模态频率相对应,从而通过模态截断或保留感兴趣的模态实现有效的模型降阶.同时,还给出了降阶方法的实数运算公式.在两种不同型号推进系...     

质子耀斑活动区的再现规律

质子耀斑活动区再现规律的研究结果表明，日面上存在着经度方向漂移式的“活火山”，即质子活动复活体，“活火山”定期地复活，并爆发质子耀斑。其复活长周期为８－１１．６年，与活动周１１年周期基本一致；短周期为１．２６年，与活动周峰年时间宽度一致。在２２周峰年中，日面南北半球上各有一个强质子活动复活体，它们爆发值流量≥１００ｐｆｕ和≥１０００ｐｆｕ的质子耀斑各占周期同类耀斑总数的７０．７％和８３．３％。     

网格阵列填充冷却通道内超临界正癸烷流动传热特性的数值研究

采用碳氢燃料冷却壁面是超燃冲压发动机常用主动冷却方式。为减轻主动冷却通道结构重量、提高冷却效率,本文探讨了以网格结构为填充的新型通道,从结构轻质化、流动特性及综合传热能力等方面与常规矩形主动冷却通道进行了比较。结果表明,在相同工况下,由错排网格填充的冷却通道结构综合性能最佳,其减重效果达39.93%,壁面温度显著下降,且努塞尔数最高达到光通道的2.156倍。从流动传热机理分析可看出,网格前缘冲击效应形成的马蹄涡和后缘附近发卡涡结构对强化传热贡献最大,扰动边界层和激发湍动能也是强化传热的重要因素。     

利用压电自敏感致动器的挠性结构振动主动控制实验研究

以粘贴有压电自敏感致动器的挠性梁振动主动控制为例，论述了进行挠性结构传感器／致动器及控制一体化研究的方法，文中给出了压电自敏感致动器的电路模型及自敏感感器 变测量和应变速度测量电路，推导了测量公式，以玻璃钢材料的挠性梁为实验对象，并采用自适应滤波技术来实现振动主动控制，控制系统由ＴＭＳ３２０Ｃ２５及４８６计算机组成的主从机系统来实现，实验结果表明此种控制方法是有效的。