半埋入式S弯进气道主动流动控制研究

为了改善半埋入式亚声速S弯进气道出口气流品质,本文采用吹、吸气方式对其进行了主动流动控制数值研究。结果表明:吸气位置、吸气量变化显著影响进气道气动性能,最佳吸气位置位于唇口附近,当唇口吸气量为进气道流量的1.9%时,总压畸变指数降低约45.7%,总压恢复系数和增压比略有提高;而附面层吹气时进气道的性能仅在吹气量较小时有所改善;附面层吹、吸组合控制对流场的改善程度介于上述方案之间,而非单独吹、吸气方案效果的简单叠加。     

多约束下的导弹螺旋机动制导控制一体化设计

针对导弹在俯冲机动突防飞行过程中攻角及落地弹道倾角受到约束的问题,基于自抗扰控制(ADRC)及反步滑模控制(SMC),提出一种多约束条件下的导弹螺旋机动制导控制一体化设计方法。首先,基于典型的螺旋机动突防弹道,同时考虑纵向平面指定落角约束,分通道进行制导控制一体化数学模型推导。然后,使用反步滑模控制进行制导控制一体化算法设计,通过设计补偿器对反步法的中间控制量进行修正实现对攻角的约束,针对系统的有界不确定性以及未知干扰,采用干扰观测器进行估计与补偿,提高系统的鲁棒性。最终使用Lyapunov理论证明了系统稳定。仿真结果表明,本文方法具有较强的鲁棒性,能够保证飞行器在满足攻角约束的条件下,按照典型螺旋机动弹道对目标进行大落角高精度打击。     

Active shape control for flexible space structures using an optimal gyricity distribution

An active shape control approach for a circular flexible space structure is studied. The shape of these flexible structures may need active shape control due to some particular mission objectives. For example, antenna reflectors may have requirements for their shape accuracy to guarantee communication performance; and some solar sails may change their shape to realize different commissions during interplanetary flight. This paper investigates an active shape control process executed by the gyricity (stored angular momentum) distribution existing in the circular flexible space structure. The shape of the circular flexible space structure is expected to be reformed from a plane plate to a paraboloidal plate. An optimal gyricity distribution is derived based on the optimal control theory for systems described by partial differential equations. Distributed forces can be generated by the optimal gyricity distribution in a rotating field to implement the active shape control. The dynamic model of the circular flexible space structure is established for the active shape control through the finite element method. Numerical simulation validates the functionality of the shape control method, and illustrates the shape-adjusting process of the circular flexible space structure.     

基于多模特征融合的雷达干扰信号识别

传统制导雷达面临的新型有源干扰样式越来越复杂，雷达必须对各种干扰类型加以鉴别。传统的干扰识别方法仅对特定单一样式有效，通用性较差、泛化能力较弱，无法应对复杂多变的干扰对抗环境。因此，必须提出智能化更高、稳健性更强的普适干扰识别方法，提升制导武器抗干扰能力。为了提高干扰信号识别的准确率，研究了多模特征融合算法，并最终对时域、时频域、信息论特征进行融合以实现分类。首次将信息论中熵、相对熵、相对距离等概念引入到干扰信号分类这个应用场景中，通过仿真实验表明，能够有效对常见干扰进行有效识别，在较低干噪比下也有较好的识别准确率。     

变弯度后缘与常规舵面机翼的颤振主动抑制对比

后缘变弯度机翼的气动弹性建模与稳定性分析日益受到关注。为了探究变弯度后缘相比常规偏转舵面机翼颤振主动抑制的方法与特点，以一个小展弦比后缘变弯度机翼为对象，首先建立结构有限元模型，并引入变弯度后缘变形模态和常规舵面偏转模态，采用亚声速偶极子格网法计算非定常气动力；然后使用基于最小状态法的有理函数拟合进行频域到时域模型的转换，建立两种构型机翼的气动弹性模型，并在建模时考虑了变弯度后缘与常规舵面控制带宽的差异；最后利用线性高斯二次型方法设计控制律进行颤振主动抑制，分析对比两种控制方式的特性差异。结果表明：采用变弯度后缘的闭环系统能够将颤振临界速度提高22%，其提升效果优于常规舵面，所需舵面偏转峰值更小。     

Active and passive compliant force control of ultrasonic surface rolling process on a curved surface

Ultrasonic surface rolling process(USRP) is one of the effective mechanical surface enhancement techniques. During the USRP, unstable static force will easily do harm to the surface quality. In order to achieve a higher surface quality on the part with a curved surface, an active and passive compliant USRP system has been developed. The compliant USRP tool can produce the natural obedience deformation along the part surface. Force control based on the fuzzy Proportional-integral-derivative(PID) ...     

Capture and detumbling control for active debris removal by a dual-arm space robot

Active debris removal (ADR) technology is an effective approach to remediate the proliferation of space debris, which seriously threatens the operational safety of orbital spacecraft. This study aims to design a controller for a dual-arm space robot to capture tumbling debris, including capture control and detumbling control. Typical space debris is considered as a non-cooperative target, which has no specific capture points and unknown dynamic parameters. Compliant clamping control and the adaptive backstepping-based prescribed trajectory tracking control (PTTC) method are proposed in this paper. First, the differential geometry theory is utilized to establish the constraint equations, the dynamic model of the chaser-target system is obtained by applying the Hamilton variational principle, and the compliance clamping controller is further designed to capture the non-cooperative target without contact force feedback. Next, in the post-capture phase, an adaptive backstepping-based PTTC is proposed to detumble the combined spacecraft in the presence of model uncertainties. Finally, numerical simulations are carried out to validate the feasibility of the proposed capture and detumbling control method. Simulation results indicate that the target detumbling achieved by the PTTC method can reduce propellant consumption by up to 24.11%.     

Novel roll effector based on zero-mass-flux dual synthetic jets and its flight test

The autonomous and controllable Dual Synthetic Jet Actuator (DSJA) is firstly integrated into the Unmanned Aerial Vehicle (UAV), and flight tests without the deflection of rudders are carried out to verify the viability of DSJA to control the attitudes of UAV during cruising. DSJA is improved into an actuator with two diaphragms and three cavities, which has higher energy levels. Actuators, differentially distributed on both sides of the wings, are installed on the trailing edge close to the wing tips. Flight tests, containing Differential Circulation Control (DCC) using double-side actuators, Positive Circulation Control (PCC) using left-side actuators and Negative Circulation Control (NCC) using right-side actuators, are implemented at cruising speed of 25 m/s. Results show that roll attitude control without rudders could be realized by DSJAs. DCC and NCC can generate the rightward roll and yaw angular velocity, prompting UAV to turn right. The stronger controlling ability can be achieved by DCC, with the maximum roll angular velocity of 15.62 (°)/s. PCC can generate a rightward roll moment, but a leftward yaw moment will be produced at the same time. Leftward yaw induces the leftward rolling moment, which weakens the roll control effect, making UAV keep to yaw to the left with a small slope.     

卫星导航有源接收天线噪声温度测量

卫星导航有源接收天线的噪声温度是导航接收系统的关键技术指标之一。针对卫星导航有源天线总体噪声温度无法测量的问题，研制了两台口面型噪声源，口面噪声源主要由辐射体、辐射体物理温度控制和温度测量仪等组成。两个口面噪声源在L和S波段分别提供高低温标准噪声温度，采用Y系数测量方法测量有源接收天线的总体天线噪声温度。测量了某卫星导航有源天线的总噪声温度，在(1.19～1.29) GHz的频率范围内，中心频率1.24 GHz上噪声温度测量结果为206 K，但是在1.266 GHz频率点上噪声温度测量大于4 000 K，说明天线与滤波器之间、滤波器与放大器之间存在设计问题或其它问题，体现出测量有源天线噪声温度的必要性。     

Active,compact, wideband,receiving filtenna with power adaptation for space-limited wireless platforms

An active, compact, wideband, receiving filtenna with power adaptation for space-limited wireless platforms is presented. By organically combining a filtering antenna and a Variable Gain Amplifier (VGA), the proposed co-designed active filtenna is achieved. Its power adaptation is empowered by controlling gain of the VGA unit. A demonstrated prototype with a compact overall size is fabricated, assembled and measured. Good performances are achieved. Furthermore, in any condition, the proposed active filtenna displays outstanding impedance matching (|S₁₁| < ?10 dB) and high passband skirt selectivity at upper and lower stopbands (Selectivity ≥ 170 dB/GHz).