微量B和C对TiAl合金铸锭缩孔缩松的影响

采用真空感应磁悬浮熔炼合金、重力浇注入室温石墨模具的方法,分别制备了Ti-47Al-2Cr-2Nb,Ti-47Al-2Cr-2Nb-0.8B和Ti-47Al-2Cr-2Nb-0.1C 3种名义成分的铸锭.对铸锭进行成分分析并利用体视显微镜和扫描电子显微镜对铸锭的铸造收缩缺陷和组织进行分析.结果表明:Ti-47Al-2Cr-2Nb合金铸锭有很强的柱状晶生长趋势,在轴线附近区域形成分散的缩松;加入0.8%B(原子分数)后,铸锭的组织得到细化,并削弱了柱状晶生长趋势,收缩缺陷分布集中以大缩孔方式存在,显微缩松的密度和尺寸均降低.添加0.1%C(原子分数)后,铸锭的组织和缩孔缩松与Ti-47Al-2Cr-2Nb比均无明显变化.     

小型铯原子钟微波腔调谐过程的仿真研究

通过建立模型,利用Ansoft HFSS 12.0对小型铯原子钟内微波腔的调谐过程进行了仿真,得到了调谐棒半径、在调配器内长度与微波腔谐振频率之间的关系曲线。结果表明,调谐棒半径一定时,调谐棒长度在一定范围内,微波腔谐振频率随着长度的增加逐渐下降;随着半径的增大,微波腔谐振频率的变化范围逐渐增大,在铯原子跃迁中心频率处,调谐棒长度对微波腔谐振频率的影响变大。根据仿真结果,给出了调谐棒半径的取值范围,为微波腔的设计、加工和调谐提供了理论指导。     

不等温空腔的有效发射率计算

采用Monte-Carlo法对不等温空腔的有效发射率进行计算分析,讨论了腔壁的不等温性、材料的光谱发射率和方向发射率对法向有效发射率的影响,为黑体辐射源的设计提供了理论计算依据。     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

导弹燃气流瞬态温度测量系统设计

介绍了采用蓝宝石黑体腔光纤作为传感器的导弹燃气流瞬态温度测量系统的测量原理、系统组成,阐述了其硬件功能模块设计,给出了软件设计算法及蓝宝石黑体腔光纤高温计的标定方法。     

细长体出水动力学的实验研究及数值模拟

航行体出水过程涉及到气液两相交界,流场是非定常且高度非线性的,是一个非常复杂的过程。为了深入研究该问题,采用实验和数值模拟相结合的方法研究了细长体垂直出水过程的水动力特性。实验在二维水箱中进行,采用高速摄影仪拍摄了不同速度下细长体垂直出水流场。数值模拟采用 VOF 模型,结合动网格和 UDF 技术对相应的实验工况进行了模拟。研究了细长体水下运动过程中空泡的生长和溃灭机理,以及细长体出水时对自由液面的干扰规律。实验研究表明:(1)细长体在完全出水时刻出水速度发生突增;(2)随着细长体速度的增大,空泡产生的部位是从尾部开始,然后再在头部出现;(3)当细长体头部没有局部空泡产生的时候,细长体出水时会造成明显液面隆起现象,当细长体头部产生局部空泡后,细长体出水时,没有明显液面隆起现象,但是会产生“喷溅”现象。数值计算表明:在不产生空泡的情况下,细长体头部接近水面到完全出水的过程中,自由液面都会隆起,尾部出水时液面隆起的程度比头部出水时大。通过比较数值计算结果与实验结果,两者吻合较好。     

基于流动控制的水下航行体流体动力特性分析

利用CFX对水下航行体流体动力特性进行了数值模拟研究.求解了混合介质的剪切压力输运湍流模型控制方程、雷诺-平均奈维尔-斯托克斯方程以及各相间的质量输运方程,采用三维数值模拟方法对比分析了不同流动控制方案的水下航行体空泡形态特征、表面压力分布和阻力系数变化特性,讨论了不同参数对减阻效果的影响.结果表明,对于有横流作用的水下垂直发射航行体,多相流动控制不仅可以降低通气空泡的不对称性和航行体阻力,同时可以均匀迎流面和背流面压力,从而实现航行体多相流空泡形态及表面压力特性等的控制.此外,通气口的位置对减阻效果具有显著影响.      

基于F-P腔的激光频率稳定传递方法

量子传感的发展需要频率高度稳定的激光器为基础,且实现大失谐激光频率稳定通常是提高其精度和灵敏度的关键。针对大失谐激光稳频问题,提出了一种利用法布里-珀罗（F-P）腔传递激光频率稳定性的方法。以饱和吸收稳频法锁定的激光器频率为参考,基于锁相原理,锁定F-P腔长度。利用F-P腔长度这个稳定的参考点,实现目标激光器的频率的精确锁定。实验将目标激光器波长锁定于767.001 nm,失谐频率为150 GHz,锁定后的频率漂移为1 MHz/h。该方法解决了激光大失谐稳频问题,对工程实践和科学研究有重要意义。      

回转体头部空化噪声特性的实验研究

为了分析回转体头部空化噪声特性,利用高速水洞实验室对实验测得的回转体圆头头体、平头头体模型空化噪声的谱特性进行了测量。测量结果表明:在空化形态不变的条件下,空化噪声宽带谱级将随空泡数的减小而单调增加;随着空化的发展,其空化噪声谱的低频段升高,而高频段的噪声则相对下降;在空泡数基本相同的条件下,模型空化噪声的宽带谱级和谱形基本相同。     

Effect of protrusion amount on gas ingestion of radial rim seal

In this paper, the effect of different amount of protrusion on various parameters in rotor–stator system was experimentally studied by measuring CO₂ concentration and pressure, in order to obtain the optimal protrusion amount. The parameters of different dimensionless sealing flow were measured under the condition that the annulus Reynolds number was 4.39 × 10⁵ and the rotating Reynolds number was 1.05 × 10⁶. The results show that the change of the amount of protrusions has little effect on the static pressure in the cavity, and the static pressure change near the sealing ring is almost negligible. But the total pressure and sealing efficiency increase first and then decrease with the increase of the amount of protrusion. The variation of power consumption is the same. A complex vortex structure will appear at the high radius region when the protrusion is installed. On the other hand, the protrusion can effectively reduce the minimum sealing flow of the rotor–stator cavity. Furthermore, considering the sealing efficiency and power consumption, the best range of the protrusion amount is about 36. The ratio near this range can optimally balance the alleviation of the gas ingestion and the reduction of the power consumption.